Formax FD 210M User manual

FD 210M
Manual Paper Creaser
OPERATOR MANUAL
FIRST EDITION
1/2013

1
INSTALLATION AND SETUP
Check package for shipping damage. If there is shipping damage, do not discard the box.
Remove creaser from box and set on a level surface.
SPECIFICATIONS
Maximum paper width: Up to 18” (460mm)
Maximum paper thickness: < .014” (0.36mm)
Width of crease: .05” (1.3mm)
Depth of crease: .015” (.4mm)
Dimensions: 23.6” W x 19.29” D x 5” H (600 x 490 x 130mm)
Weight: 21.6 lbs (9.8kg)
FUNCTION:
The Formax FD 210M Manual Paper Creaser is designed to prevent cracking in toner-based digital printouts.
Creasing sheets prior to folding ensures a clean, professional nish and makes it easier for folding devices to
fold with accuracy.
Mechanism Cover
Ruler
Side Guide
Thumbscrew
Creasing Handle
Thumbscrew
Side Guide
Creasing Channel

2
OPERATION
SAFETY GUIDELINES
1. Loosen thumbscrews on each side guide.
2. Slide side guides to correct location based on
desired placement of crease.
3. Tighten thumbscrews.
4. Load paper by sliding through creasing channel
under mechanism cover.
5. Once the paper is aligned between the side
guides, grasp creasing handle and push down-
ward, then release. Handle will return to upper
position. NOTE: Do not push too hard. Excessive
force is not required to create the crease, and
may damage creasing mechanism.
To avoid injury, do not place ngers into the creasing channel.
To avoid damage to the unit, do not place any objects other than paper into the creasing channel.
TWO-PART CREASING (BOOK SPINE CREASING):
1. Measure sheet to be creased.
2. Move right side guide to correct location and tighten thumbscrew.
3. Align page to right side guide and press down handle to crease.
4. For second crease, move left side guide to correct location and tighten thumbscrew.
5. Align page to left side guide and press down handle to crease.