Fotodiox EZ Pro User manual

EZ Pro Softbox
Instruction Manual
www.fotodiox.com
ContaCt Us:
For Information Regarding this
and more of our products,
please contact us:
E-mail: [email protected]
Phone: [phone]
www.fotodiox.com
3805 Hawthorne Ct.
Waukegan IL, 60087
We’re also on:

2
1
the softbox
Specs and Features
Pro Studio Solutions EZ-Pro
this UniqUely DesigneD softbox is perfect for studio and location shooting. It
is made with Fotodiox high quality reective and diffusive material. The
dome of the softbox is made of durable Pro-grade omni-bounce silver
reective fabric with black backing. It also features a neutral diffusive
bafe inside the dome to provide softer lighting if needed. A diffusive
white fabric closes the front of the softbox and is attached by Velcro.
The Softbox features a patent and unique beauty dish which eliminates
the harsh hot spot common in other softboxes.
Product Features:
• Assemble and dissemble in a heart beat
• Great for travel. Pro grade, heat resistant reective fabric
• Heavy duty construction
• Features inner bafe, and outer diffusive cover for even light throw
• Sealable venting for use with modeling lamp or continuous lighting
• Rotation speeding ring with thumb screw lock
1x Carrying Case 1x Softbox
1x Outer Diffuser
1x Beauty dish
1x Inner Diffuser
1x Speedring
Insert
Contents
Stripbox, Rectangular/Square and Octagon Softboxes Include
1
2
assembling the softbox
Find a large open area and
stand the Softbox on the
oor, silver side up.
To open, push the umbrella
plate against the oor until it
clicks / locks.
Place the beauty dish in
the center rod at your
desired distance along the
center rod.
3
4
5
Connect all corners of the
Inner Diffuser to the elastic
bands.
Grab the Outer Diffuser
and attach the Velcro
to the entire perimeter of
the Softbox. Press rmly
around the perimeter to
close any gaps between
the Shell and the Diffuser.
To replace the insert (if needed) simply remove the four
screws from the plate, remove the existing insert and
replace it with a new insert screwing it back on.
Be sure attach the Diffuser
on the inner side of the
Softbox, leaving a good
amount of Velcro to
attach a Grid if desired.