Fotodiox WIDE ANGLE Series User manual

WIDE ANGLE SERIES
LED VIDEO LIGHT
1 2
Warnings:
1.Radius Pico is composed of 128 ultra-bright chip LEDs with a lifespan of up to 50,000 hours.
These LEDs have a standardized color temperature with a CRI and TLCI of 95 or above.
2.Handsome light-weight, compact design that is easy to mount on camera with the included
hot shoe adapter.
3.Built-in battery for normal use.
4.Use with the included neutral white diffusion panel for a softer beam of light.
5.The magnetic design of the diffusion panel makes it easy to add or remove as needed.
6.The convex design provides soft wrap-around light with less shadow and a wider angle of
coverage than an equivalent flat lighting unit.
7.Dimmable from 10%-100% and flicker-free due the PWM integrated design.
8.Bi-color design is adjustable from 3200K(tungsten) to 5600K(daylight).
9.Suitable for indoor and outdoor photography and videography. Great for portraits, weddings
and children.
1.Do not disassemble or modify the light.
2.When not in use for extended periods of time, Do discharge and recharge the batteries at
least one time monthly.
3.Do not drop or damage the batteries; doing so may increase risk of fire.
4.Do not burn the batteries; properly dispose of them according to local regulations.
5.Do not operate with wet hands, doing so may cause electric shock.
6.Do not operate in environments near flammable gases or volatile liquids as this may increase
the risk of explosion fire.
7.Do not touch the plug or AC adapter with wet hands, doing so may cause electric shock.
8.Do not damage, disassemble, twist or modify the power cord as this may increase the risk
of fire and electric shock.
9.Do not place under heavy objects.
10.Avoid dust and debris build-up as this will change the illuminance and color temperature.
11.Keep the light surface clean with a soft, dry cloth.
A
E
B
F
C
G
D
H
White diffusion panel
Hot shoe adapter
Power ON/OFF switch
Battery indicator
USB charging port
Screw for hot shoe adapter
Dial for hot shoe adapter
Color temperature control knob
Brightness control knob
I
Radius Pico
2 1
5
4
3
Radius Pico White diffusion panel USB cable
Hot shoe Manual
Parts Diagram:
Packing list:
Radius Pico
Characteristics:
Radius Pico

WIDE ANGLE SERIES
LED VIDEO LIGHT
3 4
Specifications:
MODEL
SIZE
Operating Instructions:
LED
Illuminance
Beam angle
Color temperature
CRI
TLCI
Power (LEDs)
Working voltage
Continuous working time
Battery Type
Battery lifetime
Battery recharging time
Dimension
Weight
Accessories
3200K±200K ~ 5600K±300K
Ra: 95-98
≥95
5W
DC5V
Approx 1.5hrs
Built-in rechargeable lithium battery, 2500mAh, 3.7V
Approx 500 cycles
Approx 4-5hrs
12x4x7.5cm(w/diffusion panel)
12x2.7x7.5cm(w/o diffusion panel)
166g ( w/diffusion panel ), 144g (w/o diffusion panel)
Hot shoe , diffusion panel, USB cable, kit bag
Radius Pico
128pcs of ultra bright chip LEDs
5600K(w/diffusion panel): 455Lux/0.5m, 133Lux/m
5600K(w/o diffusion panel): 667Lux/0.5m, 185Lux/m
3200K(w/diffusion panel): 423Lux/0.5m, 120Lux/m
3200K(w/o diffusion panel): 637Lux/0.5m, 173Lux/m
140°(w/white diffusion panel） 120°(w/o white diffusion panel)
1.Attach the white diffusion panel by lining up the magnets on the diffuser with the magnets on the
light unit.
2.How to attach the hot shoe adapter
(1) Adjust the screw of the hot shoe adapter until one end of the adapter fits onto the light.
(2) Place the end of the adapter into the light slot; adjust the screw clockwise to attach to the adapter.
(3) Place the opposite end of the hot shoe adapter into the camera's hot shoe; adjust the dial on the
adapter to create a firm connection with the camera.
Power ON/OFF switch
3.Operating Instructions
(1) Turn the power on using the ON/OFF switch on the upper left side of the light unit.

WIDE ANGLE SERIES
LED VIDEO LIGHT
5 6
Radius Mini
Characteristics:
Warnings:
Color temperature
control knob
Brightness control knob
Battery indicator
1.Radius Mini is composed of 600 ultra-bright chip LEDs with a lifespan of up to 50,000 hours.These
LEDs have a standardized color temperature with a CRI and TLCI of 95 or above.
2.Handsome light-weight, compact design that is convenient to transport.
3.LCD displays real-time data.
4.The convex design provides soft wrap-around light with l ess s hadow and a wider angle of
coverage than an equivalent flat lighting unit.
5.Produces a soft, bright and stable beam with standard color temperature.
6.The unit is heat free and remains consistently illuminated even as the battery voltage drops.
7.Dimmable from 10%-100% and flicker-free due the PWM integrated design.
8.Bi-color design is adjustable from 3200K(tungsten) to 5600K(daylight).
9.Suitable for indoor and outdoor photography and videography. Great for portraits, weddings and
children.
(2)
control
The brightness can be adjusted using the brightness control knob on the upper right side of the
light unit.Turn clockwise to increase and counterclockwise to decrease brightness.
The brightness knob will allow you to adjust from 10% to 100% brightness.
(4) When charging the battery indicator light will show red while the light unit is charging and green
when the unit is fully charged. While the light is in use the battery indicator light will show red if the
remaining power is 10% or less; green when there is more than 10% power remaining.
(3) The color temperature can be adjusted using the color temperature control knob on the lower
right side of the light unit. Turn clockwise to increase and counterclockwise to decrease the
color temperature.
The color temperature control knob will allow you to adjust from 3200K(tungsten) to 5600K
(daylight).
1.Do not disassemble or modify the light.
2.Do remove the batteries when in storage.
3.When not in use for extended periods of time, Do discharge and recharge the batteries at least one
time monthly.
4.Do not short circuit the batteries as this may seriously damage the batteries and increase risk of fire.
5.Do not drop or damage the batteries; doing so may increase risk of fire.
6.Do not burn the batteries; properly dispose of them according to local regulations.
7.The 12 V 2A adap ter is used fo r batter y charging and for powering the light from an electrical
outlet.
8.Do not operate with wet hands, doing so may cause electric shock.
9.Do not operate in environments near flammable gases or volatile liquids as this may increase
the risk of explosion fire.
10.Do not touch the plug or AC adapter with wet hands; doing so may cause electric shock.
11.Do not damage, disassemble, twist or modify the power cord as this may increase the risk of
fire or electric shock.
12.Do not place under heavy objects.
13.Avoid dust and debris build up as this will change the illuminance and color temperature.
14.Keep the light surface clean with a soft, dry cloth.
15.Only use the AC power cord provided; please contact us if you require a replacement.

WIDE ANGLE SERIES
LED VIDEO LIGHT
7 8
MODEL
SIZE
2
6
3
4
1
5
Curved light panel
Battery release button
Battery slot
LCD screen
Brightness control knob
Color temperature control knob
Power ON/OFF switch
DC input
Radius Mini
A
E
B
F
C
G
D
H
Radius Mini
AC adapter(charger,24W)
Lithium battery
Battery charger Ball head Manual
Parts diagram:
LCD display:
Brightness
Color temperature
Battery level display
LED
Illuminance
Beam angle
Color temperature
CRI
TLCI
Power (LEDs)
Working voltage
Continuous working time
Battery type
Battery lifetime
Battery recharging time
Battery level display
Dimension
Weight
Accessories
Radius Mini
600pcs of ultra bright chip LEDs
5600K:1105 Lux/0.5m, 312Lux/m
3200K: 980Lux/0.5m, 283Lux/m
180°
3200K±200K ~ 5600K±300K
Ra: 95-98
≥95
36W
DC12-17V
Approx 1.5hrs
Rechargeable lithium battery, 4400mAh, 7.4V
Approx 500 cycles
Approx 4-5hrs
YES
19.1x6.7x12.1cm
534g
4400mAH lithium battery, AC adapter 12V 2A, battery charger, ball head, kit bag
Packing list:
Specifications:
Radius Mini

Color temperature
control knob
DC input
Brightness
control knob
Operating Instructions:
1.Power supply
(1) Insert the plug of the AC adapter into DC input socket on the right side of the control box.
(2) Connect the AC adapter to the external AC power.(AC100V-240V).
(3) For DC power supply, put the provided battery into the battery slot.
Notes: Please remove the battery when using the AC power adapter
The color temperature can be adjusted using the color temperature control knob. Turn clockwise
to increase and counterclockwise to decrease the color temperature.
The Color temperature control knob will allow you to adjust from 3200K(tungsten) to
5600k(daylight).
(3)
(4)
Four bars: 75-100% remaining power
Three bars: 50-75% remaining power
Two bars: 25-50% remaining power
One bar: 10%-25% remaining power
No bars: 10% or less remaining power
Flickering:Not enough remaining power to operate the unit;recharge the battery
The right side of the LCD displays the battery level.
2.Battery power:
(2) The brightness can be adjusted using the brightness control knob.
Turn clock-wise to increase or counter clock-wise to decrease brightness.
(1) Install the provided battery and turn on the power switch.
The LCD screen shows real-time brightness,color temperature and battery level.
Power ON/OFF switch
WIDE ANGLE SERIES
LED VIDEO LIGHT
9 10