Fotodiox PRIZMO Jupiter 18 PZM-700R User manual

1100 Lakeside Dr Gurnee , IL60031, United States
Toll Free:[phone]
Local & International: [phone]
Fax: [phone]
Http://www.fotodioxpro.com
Fotodiox Inc.
w w w . f o t o d i o x p r o . c o m
R
R
USER MANUAL
PZM-700R
JUPITER 18

Introduction:
Thank you for choosing the FACTOR Prizmo lighting series from Fotodiox Pro. This light is designed with an all-aluminum
frame, and a good heat dissipation system. It is a compact, soft and highly efficient multicoloured LED light.Not only can
you control the color and color temperature of the light, you can also adjust the green and magenta points for optimized
spectrum and good color effects. All models can be controlled by using the popular DMX512 protocol or menu controls
built on the light. These lights can also be controlled with an available optional remote control or mobile APP.
Warnings:
1.Do not disassemble or modify the light.
2.Remove batteries when in storage.
3.Do not operate in environments near flammable gasses or volatile liquids as this may increase the risk of explosion
or fire.
4.Do not operate in enclosed spaces where heat buildup can be extreme, such as inside a car on a sunny day. The
increased heat may cause premature failure of the lighting unit.
5.Do not touch or operate with wet hands, doing so may cause electric shock.
6.Do not damage, disassemble, twist or modify the power cord as doing so may increase the risk of fire or electric
shock.
7.Do not place under heavy objects.
8.ONLY use the provided AC power adapter. Using other AC power adapters may result in damage to your light.
9.Avoid impact to the LCD screen.
10.Avoid dust and debris buildup as this will change the illuminance and color temperature. Keep the light surface
clean with a soft, dry cloth.
11.When hanging the light, always use the included safety cable.
12.Do not block the air inlet for the cooling fan. Doing so will inhibit heat dissipation and may cause excess noise.
Characteristics:
1.All-aluminum frame is lightweight and strong with good heat dissipation to ensure a long product life.
4.Fully adjustable brightness from 0-100%.
5. Multiple pre-programmed scenes and effects.
6. High CRI and TLCI, CRI:93-98, TLCI:95-97.
7.Can be powered using an external battery; convenient for location shoots.
8.USB port designed to update the software.
9.LCD screen shows the kinds of data.
10.LED low heat technology means that it will emit steady and accurate light under varying condition.
11.Compatible with DMX512, can be controlled by DMX512 console or remote control.
12.Suitable for broadcasting studio, film and television production, location shooting and more.
2.Fully adjustable color temperature from 2800K-10000K.
3.Complete 0-360° color selection (RGB+WT color spectrum).
Light unit -1PC AC power adapter (144W)-1PC Power cord -1PC
DMX cable-1PC Safety cable-1PC
Instruction manual-1PC
Bag -1PC
[PZM-700R]
12 3
456
7
1 2
LED STUDIO LIGHT LED STUDIO LIGHT
PZM-700R
Packing List:
Optional Accessories:
Fabric Grid
Honeycomb grid
Remote control Mobile APP
Soft diffuser--1PC
8

Light emission surface
Yoke
Yoke locking knob
V-lock plate
V-lock release button
Control panel
Stand mount locking screw
Control Panel Diagram:
AA
G
C
B
PZM-700R
3 4
LED STUDIO LIGHT LED STUDIO LIGHT
AB
C
DEF
GHI
JK
H
G
F
A
B
J I
C
PZM-700R Control Panel Diagram:
DE
K
B
C
E
F
D
D
F
E
G
SAT0-100%
Intensity10-100% Selector
DMX input
Touch buttons
(CCT, HSI, RGBWT, MENU, Filters, Special Effect, Scenes, BACK )
USB port Power ON/OFF switch Knob 1 – Intensity
Knob 2–SAT ( saturation ) Knob 3 – Selector ( with touch button functionality ) LCD screen
Indicator lights ( 2 indicators ) 4-pin XLR socket
Parts Diagram:
DMX output
Power
ON
OFF
DMX IN
DMX OUT
CCT HSI RGBW MENU
Filters Special Effect Scenes BACK
Battery
Data

PZM-700R Illuminance:
Illuminance
Color temperature
NO.
2800K
5100Lux
1470Lux
418Lux
82Lux
3200K
5670Lux
1540Lux
440Lux
87Lux
5600K
6360Lux
1770Lux
508Lux
99Lux
10000K
5830Lux
1670Lux
460Lux
91Lux
0.5m
1m
2m
5m
Red
1520Lux
440Lux
127Lux
4400Lux
1270Lux
360Lux
770Lux
210Lux
63Lux
0.5m
1m
2m
Green Blue
25Lux 72Lux 12Lux5m
5 6
LED STUDIO LIGHT LED STUDIO LIGHT
Distance
Specifications:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
95-97
93-98
Diffusion panel
ø407MM
Full RGB+W spectrum with hue saturation control
adjustment from 0-100%
adjustment from 2800K-10000K
+/-200K
AC100-240V, 50/60Hz,DC15V
100W max
V-lock plate
DC12-17V
0-80%
-20-45℃
50,000 hours expected
7.78lbs (3.53Kg)without adapter,9.41lbs (4.27Kg) with adapter
510x560x75MM
Name
DMX 512,Remote control,Mobile APP(for future application)
120°
IP20
Optical system
Light emission surface
Beam angle
Color
Intensity/brightness
White light
CRI
TLCI
Color temper atureerror
Remote control
Power input
Power output
Battery mount
Battery mode power output
Working temperature
Protection
LED lifetime
Weight
Dimensions
2.Use the Honeycomb Grid
(1) Insert the lower end of the honeycomb grid into the slot of the left and right buckles under the front panel
of the light body, and then the top of the honeycomb grid into the left and right buckles above the light body.
(2) Check the four buckles after installation to ensure that they are in place.
(3) To remove the honeycomb grid, open the upper two buckles in turn, and pull out the honeycomb grid.
Operating Instructions:
1.Set-up instructions:
(1) Twist the stand mount locking screw counterclockwise to loosen until the stand or stud can be inserted
into the socket. Twist the stand mount locking screw clockwise to tighten in place.
(2) When mounting to a 1/8” stud, it will be necessary to remove the set screw.
4.How to use the safety cable
(1) When hanging the product, always use the safety cable.
(2) The safety cable is fixed through the yoke and the external fixing frame.
Battery power
PZM-700R
Illuminance
Color temperature
Distance
20
JUPITER18
w w w . f o t o d i o x p r o . c o m
R
Stand mount locking screw
JUPITER 18
w w w . f o t o d i o x p r o . c o m
R

( )Plug the adapter's DC output into the 4-pin XLR socket located in the lower left corner of the control panel.
(2)Plug in the adapter's AC power cord to connect to external AC power (AC100-240V).
5.Connecting the power supply
1
7 8
LED STUDIO LIGHT LED STUDIO LIGHT
SAT 0-100%
(1) The V-lock holder is already mounted on the adapter when it is shipped from the factory.
(2) Install the power adapter with V-lock plate on the back of the light.It is successfully installed when you hear the lock
mechanism click..
4.How to Install the AC power adapter
(3) To remove the adapter, press down on the V-lock release button and push the adapter out of the V-lock plate.
6.Battery Power
Insert
your V-lock battery (sold separately) into the V-lock plate. To remove the battery, press the release button
and slide the battery out in the opposite direction.
This product can be powered by an external battery attached to the product's built in V-lock plate.
Note: The PZM-700R operates on battery with an output power of 150W or more.
2.Saturation Knob:
3.Intensity knob:
Functions of the control knobs:
1.Selector Knob:
Rotate the selector knob to select the desired mode in the menu, press once to select.
In certain modes, parameters such as CCT, CMB, SPD, and Frq may be adjusted using this knob.
In HSI, CCT, RGBWT mode, press the knob for several seconds to save the current settings.
Selector Knob
In the HSI mode, SAT can be adjusted from 0-100%. In other modes,
parameters such as SAT, CMB, Col, may be adjusted using this knob.
Attaching the adapter Removing the adapter
Adjusts brightness from 0-100% in any mode.
brightness 0-100%
JUPITER 18
w w w . f o t o d i o x p r o . c o m
R
JUPITER 18
w w w . f o t o d i o x p r o . c o m
R
JUPITER 18
w w w . f o t o d i o x p r o . c o m
R
JUPITER 18
w w w . f o t o d i o x p r o . c o m
R