Freescale Semiconductor SABRE MCIMX6Q-SDP User manual

Looking for a discount?
Check out our current promotions!
This coversheet was created by Verical, a division of Arrow Electronics, Inc. (“Verical”). The attached document was created by the part supplier,
not Verical, and is provided strictly 'as is.' Verical, its subsidiaries, affiliates, employees, and agents make no representations or warranties
regarding the attached document and disclaim any liability for the consequences of relying on the information therein. All referenced brands,
product names, service names, and trademarks are the property of their respective owners.
00000005981LF-000
EOS Power
Buy Now
We have 45,000 LP502030-PCM-NTC-LD-A02554 - EEMB - Lithium Battery Rectangular 3.7V 250mAh Rechargeable in
stock now. Starting at $0.034. This EEMB part is fully warrantied and traceable.
1-855-837-4225
Give us a call
International: 1-555-555-5555 1-415-281-3866
1-415-281-3866
Arrow Electronics,
Verical Division
P.O. Box 740970
Los Angeles, CA 90074-0970
Arrow Electronics, Inc
9201 East Dry Creek Road
Centennial, CO 80112
MCIMX6Q-SDP
NXP SEMICONDUCTORS
Buy Now

Quick Start Guide
SABRE Platform for Smart Devices
Based on the i.MX 6 Series

2
Quick Start Guide
About the SABRE Platform for Smart Devices
Based on the i.MX 6 Series
The Smart Application Blueprint for Rapid
Engineering (SABRE) platform for smart
devices is the latest in a series of high-
performance, highly integrated development
kits from Freescale that introduce designers
to market-focused uses of the i.MX 6 series
applications processor.
The SABRE platform for smart devices can
be targeted towards any device requiring
an intelligent display, connectivity, low
power consumption and an amazing
user experience, and comes equipped
with either an i.MX 6Quad applications
processor or an i.MX 6DualLite applications
processor. Included with the design are
links to the hardware design files, tools and
board support packages (BSP) for Linux
®
and Android
™
along with bootable Android
image on an SD card to get you up and
running quickly.

3
freescale.com
The following features are available with
the SABRE platform for smart devices
based on the i.MX 6 series:
• i.MX 6Quad applications processor
1 GHz or i.MX 6DualLite applications
processor 1 GHz
• 1 GB DDR3 533 MHz
• 10" LVDS display panel with capacitive
touch screen
• 8 GB eMMC iNAND
• Two SD card slots
• SATA 22-pin connector
• HDMI connector
• Secondary LVDS connector
• LCD expansion port connector
• EPDC expansion port connector
• Two five-megapixel cameras
• Two 3.5 mm audio ports
(stereo HP and microphone)
• Two board-mounted
digital microphones
• External stereo speakers
• 4 MB SPI NOR flash
• USB OTG connector
• Debug out via USB µAB
device connector
• Gigabit Ethernet connector
• JTAG 20-pin connector
• mPCIe connector
• GPS module with antenna
• Sensor package including:
3-axis accelerometer
Digital compass
Ambient light sensor

4
Quick Start Guide
Get to Know SABRE Platform for
Smart Devices Based on the i.MX 6 Series
External Speakers
U17–Ambient Light
Sensor
GPS Antenna
U19–GPS Module
J11–MIPI Display
Connector
CON2–DC Battery Connector
J5–MIPI Camera Connector
U14–SPI NOR Flash
No Manual SD Switch
On SDP

5
freescale.com
P1–DC Power Connector
CON1–SIM Card
Connector
J1–Mini PCIe Connector
SW2–Board Reset Button
J7–Ethernet Connector
J9–DVP Camera Connector
U18–Accelerometer
U20–eCompass
J2–Headphone Output Jack
J4–Microphone Input Jack
SW1–Optional Power Button
SW4–Volume Up Button
SW5–Volume Down Button
J6–JTAG Connector
J8–HDMI Connector
SW6-Boot Mode
Selector Switch
J13–Bluetooth®
Cable Connector

6
Quick Start Guide
J504–LCD Expansion
Port Connector
J506–22-Pin SATA
Connector
J502–LVDS1
Connector
J503–LVDS0 Connector
BT500–Lithium
Coin Cell Connector
CON500–External
Speaker Connector
J509–Serial-To-USB
Debug Port
J508–EPDC Expansion
Port Connector
J507–SD3
Card Socket
J500–SD2 AUX
SDIO Socket
J505–Micro USB
Connector

7
freescale.com
Getting Started
This section describes how to use the SABRE platform for smart devices board and kit
components. This section also describes the PC requirements to develop applications
using the platform.
Item Description
Smart device platform Main board, LVDS display and speaker board, pre-assembled
Cable USB cable (micro-B to standard-A)
Power Supply 5 V/5 A universal power supply
Documentation Quick Start Guide (this document)
8 GB SD card Bootable demonstration code for smart device platform
Development Kit Contents
1Unpacking
the Kit
The SABRE platform for smart devices is shipped with the items listed in Table 1. Ensure
the items listed in Table 1 are available in the i.MX 6 series development kit. Remove the
platform from the antistatic bag and perform a visual inspection.
Table 1: SABRE Platform for Smart Devices Based on i.MX 6 Series Development Kit Contents

8
Quick Start Guide
“Jump Start Your Design” Contents
Download Software
and Tools
Download installation software and documentation under
“Jump Start Your Design” at freescale.com/SABRESDP.
Table 2 lists the documents available on the kit website.
2
Item Description
SABRE platform for smart
devices documentation
• Schematics, layout and Gerber files
• SABRE Platform for Smart Devices Based on the
i.MX 6 Series Quick Start Guide (this document)
Software development tools Android and Linux BSPs
SABRE platform for smart
devices demo images Copy of the Android image provided on the SD card
Table 2: “Jump Start Your Design” Contents
Getting Started

9
freescale.com
Setting Up the System
1Insert
SD Card
Insert the supplied SD card into socket
SD3.
2Connect USB
Debug Cable (Optional)
Connect the micro-B end of the supplied
USB cable into debug port J509. Connect
the other end of the cable to a PC acting
as a host terminal. If needed, the serial-
to-USB drivers can be found at
ftdichip.com/FTDrivers.htm.
Terminal window configuration: 115.2
kbaud, 8 data bits, 1 stop bit, no parity.
3Connect Ethernet
Cable (Optional)
Connect an Ethernet cable to the Ethernet
jack J7.
4Connect
Power Supply
Connect the 5 V power supply cable to
the 5 V DC power jack P1. When power
is connected to the smart device, it will
automatically begin the boot sequence.