Frisco 253037 User manual

operation of your pet fountain and keeping your pet hydrated.to ensure optimal
Power Adapter
Base
Pump
(IPX8 Waterproof rating) Filter
Stainless steel cover
with TPR pump holder Filter holder
SKU 253037
Please remove protective foam from the pump prior to use.

Step 1 Step 2
.
Soak the filter in water for 2 minutes and
rinse for 30 seconds before insert the
filter into the filter holder.
Locate the slider - Move the pump's
slider up/down to adjust the water flow.
The recommended starting default
location of this product is the highest one.
HINT: Fill with clean water to the MAX level.
Insert the stainless steel cover into the
filter holder, make sure insert it into
the slot on the plastic holder.
Step 3
Step 5 Step 6
Connect to the power up supply.
Step 4
Put the installed stainless steel cover and
filter holder into the opening on the rim
of the base.
21
43
65
Fill the clean water to the water level
between MIN and MAX on the water
level indicator.
Pump only operates when water level
is above the MIN water level, if not it
will stop to operate.
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN