FROST 199-S Instruction sheet

Specification Information
Frost Products Ltd
5276 John Lucas Drive [phone] [e-mail]
Burlington, ON, Canada, L7L5Z9 1-800 667-5094 www.Frostproductsltd.com
Product Code: 199-S
Product Name: Toilet Seat Cover Dispenser
Individual Carton UPC: 624622199708
Individual Carton Shipping Dimensions: 40.6cm W x 29.2cm H x 6.4cm D (16″W x 11½″H x 2½″D)
Individual Carton Shipping Weight: 1.4 kg (3 lbs)
Site Location: Frost’s 199-S stainless steel toilet seat cover dispenser is an aesthetically pleasing product. This
economical unit is available in two finishes to suit both institutional and commercial applications. Typically, the
dispenser is used in schools/universities, restaurants, malls, office buildings, condominiums, fitness facilities, and
recreation centres. The sleek appearance and ease of use of this product make it an ideal hygienic solution.
Features:
•Straightforward design makes this product user friendly and also reduces the risk of product malfunction
•Non-proprietary dispenser which can lead to cost savings for end users and property managers
•Easily accessible front loading
•Durable construction of Canadian steel to help ensure a long-lasting product life
Dispensing: This product dispenses toilet seat covers manually from the front of the unit. The dispenser is also universal;
meaning, the unit is non-proprietary and dispenses paper from standard commercial paper producers. This allows the
end user to avoid getting locked into paper supply contracts and should save them money on their janitorial supplies. To
load this product, manually insert desired seat covers into the front of the unit.
Capacity:
•Will accept all standard half fold toilet seat covers. Frost sells code 199-2500: half fold biodegradable seat
covers, green seal. Packed 2,500 / case (10 sleeves of 250).
Materials:
•All stainless steel construction of 22 gauge type 430 satin brushed finish
Product Dimensions:
•39.1cm W x 28.6cm H x 5.1cm D (15⅜″ W x 11¼″ H x 2″ D)

Specification Information
Frost Products Ltd
5276 John Lucas Drive [phone] [e-mail]
Burlington, ON, Canada, L7L5Z9 1-800 667-5094 www.Frostproductsltd.com
Product Weight:
•0.9 kg (2 lbs)
Installation Guidelines: For unrestricted access, bottom of the unit to floor must be between 38.1cm to 121.9cm (15″to
48″). This dispenser comes with two standard combination style screws. Mark mounting holes against the mounting
surface using a pencil and level. Use a screwdriver or power drill to drill screws in the desired mounting surface and
attach the dispenser. Please note that it is recommended that all installations be conducted by a qualified tradesperson.
Please read and follow any additional installation guidelines provided with the products.
Maintenance: Normal preventative maintenance and cleaning will keep Frost products functioning properly and may
extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel
cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical
cleaners. For stainless steel please do not spray with any product containing bleach, acids, or chlorides, which can be
found in many cleaning products such as toilet bowl cleaners. Use of these cleaning solutions may cause discolouration
and if used for prolonged periods of time they can eat away at points in the stainless steel. If discolouration occurs, the
use of an approved stainless steel cleaner and a firmer scrub pad, such as a Scotch Brite Pad #7447, may remove the
markings. Wipe away any debris from the area and gently rub with the pad. Then spray the area with a stainless steel
cleaner/polish and rinse and dry. Always wipe with the grain direction for stainless steel products. If a cleaning agent has
begun to eat away at the steel on a unit then the unit will likely need to be replaced. The stainless steel that Frost
Products uses is of high quality and stainless steel is resistant to rust. However, discolouration that appears to be rust
can be caused by cleaning solutions and soaps mentioned above. It is important to discontinue use of any cleaning agent
or soap if discolouration begins to occur. Clean off the discolouration as quickly as possible to avoid any permanent
damage to the unit. Maintenance staff should be taught how to recognize the signs that they are not using the
appropriate cleaning products and how to correctly maintain stainless steel items.
Warranty: If any product or part proves to be defective within 12 months from date of shipment from the factory it will
be repaired or replaced without any charge including freight costs when authorized. Costs resulting from the installation
or removal of defective products are not covered under this warranty. Discolouration to stainless steel parts resulting
from exposure to harsh environmental and / or chemicals are not considered to be defects in workmanship or material
and are not covered under warranty.