FROST QUADRA 4 Install guide

1
Exclusion of liability
FROST accepts no liability whatsoever
for damage to persons or property that
occurs or has occurred as a result of
improper installation or maintenance,
particularly if the safety instructions
and other points to note listed are not
or have not been observed in full.
Warning and hazard notices
Improper mounting or use can lead to
accidents and serious injuries.
60,00 mm
82,50 mm
192,00 mm
52,50 mm
110,00 mm
200 ml
Fitting instruction
Montageanleitung
Monteringsvejledning
Monteringsvägledning
Montage hanleiding
Manuel de montage
Liquid soap
Cremeseife
Cremesæbe
Cremetvål
Créme zeep
Savon créme
pH Neutral
pH Neutraal
pH Neutre
SOAP DISPENSER 4
QUADRA
OPEN
LOCK
4mm Allen Key

2
MAINTAINING THE DISPENSER
If the dispenser is not used for a long period of time and
becomes clogged.
Pour ONLY warm water into the dispenser and gently
pump it to clear the blockage.
NEVER try inserting a sharp object e.g. pin into the soap
nozzle, which could irreparably damage the pump
and void the warranty.
ONLY clean inside the dispenser with warm water.
NEVER use solvents or aggressive household cleaners like
bleach, acids (e.g. descalers) or ammonia-based bathro-
om cleaner.
To clean the outside of the dispenser, use warm soapy
water or approved stainless steel cleaners.
Should brown deposits appear around the lid or pump,
remove with a brush or pan cleaning pad and soapy
water.
Hard deposits can be scratched o with your ngernail or
a blunt knife.
It is not exactly rust, and to avoid it, try changing to a
milder liquid soap with a neutral PH
-
-
-
-
-
-
-
-
-
Operating
Bedienung
Betjening
Buk
Bediening
Emploi
Maintenance
Pege
Vedligeholdelse
Skötsel
Verpleging
Entretien

3
Bavne Allé 6E
DK-8370 Hadsten
[phone]
[e-mail]
www.frost.dk
SOAP DISPENSER 4
SOAP DISPENSER 4
Q3045.196
One lid with lock for public use
+ one extra lid for private use.
Material: Stainless steel, AISI 304
Design: Bønnelycke mdd
Manufacturer: FROST A/S
2x
2x
D11.2 - DB6.2 - L50
D8 - L39.6
A
B
2x
1x
C
D
M5 - P0.8 - L5
2,5MM
1x
E
4MM