FROST 614-S User manual

Specification Information
Frost Products Ltd
5276 John Lucas Drive [phone] [email protected]
Burlington, ON, Canada, L7L5Z9 1-800 667-5094 www.Frostproductsltd.com
Product Code: 614-S
Product Name: Surface Mounted Free Retail Feminine Napkin Dispenser
Individual Carton UPC: 624622614041
Individual Carton Shipping Dimensions: 41.9cm W x 15.0cm H 13.0cm D (16.5″W x 5.9″H x 5.1″D)
Individual Carton Shipping Weight: 1.7kg (3.7 lbs)
Site Location: Frost’s 614-S free retail feminine napkin dispenser is sleek and practical. This product securely holds retail
(non-commercially boxed) feminine napkins in various sizes. This surface mounted dispenser provides easy flexible
mounting on any type of wall material or construction. Typically, these products are used in schools, office buildings,
recreational facilities, and other commercial properties. The user-friendly functionality and professional appearance of
this unit makes it a popular choice.
Features:
•Canadian made with sturdy 22 gauge stainless steel
•Friendly radius corners
•View window allows users to see when there are approximately 20 units remaining
•Integrated door stop provides quick access and easy loading
•Provision for both two and four screw mounting
•Dispenses retail feminine napkins free of charge
Dispensing: Frost code 614 is designed to dispense free retail napkins. These are non-commercially boxed individual
napkins; the type often purchased through pharmacies or grocery stores. The maximum individual pad size for this unit
to operate correctly is 4.75" wide x 4" deep x 0.75" in thickness. To operate this unit, manually pull the retail napkins out
of the bottom slot. To refill this unit, use the provided key to open the top and manually insert the desired products in
the empty slot.
Capacity:
•50-70 retail napkins depending on the thickness and brand of the product. The maximum individual pad size for
this unit to operate correctly is 4.75" wide x 4" deep x 0.75" in thickness.
Materials:
•All welded 22 gauge stainless steel

Specification Information
Frost Products Ltd
5276 John Lucas Drive [phone] [email protected]
Burlington, ON, Canada, L7L5Z9 1-800 667-5094 www.Frostproductsltd.com
•Type 304 brushed finish
Product Dimensions:
•13.0cm W x 40.8cm H 10.6cm D (5.1″W x 16″H x 4.2″D)
Product Weight:
•1.5kg (3.3 lbs)
Installation Guidelines: Using the appropriate tools for installation, drill mounting holes as required and attached the
unit into desired surface. The unit can be mounted with two or four screws. For barrier free mounting ensure that the
napkin slot does not exceed 48″(121.9 cm) above floor level. Please note that it is recommended that all installations be
conducted by a qualified tradesperson. Failure to do so may result in serious injury or death.
Maintenance: Normal preventative maintenance and cleaning will keep Frost products functioning properly and may
extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel
cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical
cleaners. For general dirt and blemishes on painted steel or plastic use warm water and mild soap, or a general mild
cleaning solution. When using any type of cleaning solution, spray onto a discrete area to test before full usage. After
the cleaning agent is applied, wipe off with a clean soft cloth or sponge. For stainless steel please do not spray with any
product containing bleach, acids, or chlorides, which can be found in many cleaning products such as toilet bowl
cleaners. Use of these cleaning solutions may cause discolouration and if used for prolonged periods of time they can
eat away at points in the stainless steel. If discolouration occurs, the use of an approved stainless steel cleaner and a
firmer scrub pad, such as a Scotch Brite Pad #7447, may remove the markings. Wipe away any debris from the area and
gently rub with the pad. Then spray the area with a stainless steel cleaner/polish and rinse and dry. Always wipe with
the grain direction for stainless steel products. If a cleaning agent has begun to eat away at the steel on a unit then the
unit will likely need to be replaced. The stainless steel that Frost Products uses is of high quality and stainless steel is
resistant to rust. However, discolouration that appears to be rust can be caused by cleaning solutions and soaps
mentioned above. It is important to discontinue use of any cleaning agent or soap if discolouration begins to occur.
Clean off the discolouration as quickly as possible to avoid any permanent damage to the unit. Maintenance staff should
be taught how to recognize the signs that they are not using the appropriate cleaning products and how to correctly
maintain stainless steel items.
Warranty: If any product or part proves to be defective within 12 months from date of shipment from the factory it will
be repaired or replaced without any charge including freight costs when authorized. Costs resulting from the installation
or removal of defective products are not covered under this warranty. Discolouration to stainless steel parts resulting
from exposure to harsh environmental and / or chemicals are not considered to be defects in workmanship or material
and are not covered under warranty.