FROST NOVA2 Install guide

1
170 ml
SOAP DISPENSER 1
Fitting instruction
Montageanleitung
Monteringsvejledning
Monteringsvägledning
Montage hanleiding
Manuel de montage
Liquid soap
Cremeseife
Cremesæbe
Cremetvål
Créme zeep
Savon créme
pH Neutral
pH Neutraal
pH Neutre
NOVA2
Exclusion of liability
FROST accepts no liability whatsoever
for damage to persons or property that
occurs or has occurred as a result of
improper installation or maintenance,
particularly if the safety instructions
and other points to note listed are not
or have not been observed in full.
Warning and hazard notices
Improper mounting or use can lead to
accidents and serious injuries.
N1926
185 mm
35 mm
13,75 mm
94,50 mm
6 mm
2,5mm
130,75 mm
3 mm
55,00 mm 39,50 mm

2
MAINTAINING THE DISPENSER
Never try inserting a sharp object e.g. pin into the soap nozzle.
This can irreparably damage the pump and void the warranty.
Never use solvents or aggressive household cleaners like
bleach, acids (e.g. descalers) or ammonia-based bathroom
cleaner to clean the product.
Steel wool and hard brushes can permanently damage the
surface of the steel.
Should brown deposits appear around the lid or pump,
remove with soapy water and a soft brush. Hard deposits can
be scratched o with your ngernail. In order to avoid this, try
changing to a liquid soap with a neutral PH.
-
-
-
-
Operating
Bedienung
Betjening
Buk
Bediening
Emploi
Maintenance
Pege
Vedligeholdelse
Skötsel
Verpleging
Entretien
If the dispenser is not used for a long period of time and becomes
clogged, pour warm water into the dispenser and gently pump it to
clear the blockage.
All surfaces should be cleaned with a microber cloth, glass cleaner or
other non-abrasive and gentle agents. If stained, clean with warm
soapy water. Use a soft cloth to wipe dry. Soap and cleaning agents
must be regularly removed from stainless steel surfaces in order to
prevent corrosion-like residues.
ATTENTION

3
Bavne Allé 6E
DK-8370 Hadsten
[phone]
[e-mail]
www.frost.dk
SOAP DISPENSER 1
N1926
Material: Stainless steel, AISI 304
Design: Bønnelycke mdd
Manufacturer: FROST A/S
O1926
N1926-C
N1926-B
N1926-GO
N1926-W