FSR TB-CHRG User manual

FSR 244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: [phone] - Fax: [phone]
43096 LIT1564
TB-CHRG Installation Instructions
1. DETERMINE LOCATION AND CUT 6-1/16 x 5-3/16 HOLE
WITH 3/8 MIN - 5/8 MAX RADIUS CORNERS IN TABLE TOP.
2. INSTALL MOUNTING BRACKETS TO ASSEMBLY AND SECURE
TO TABLE BY SCREWING MOUNTING SCREWS TO UNDERSIDE
OF TABLE.
PANEL
DIRECTION
TB-CHRG ASSEMBLY
MOUNTING BRACKET
AND MOUNTING
SCREW INSTALLED
CUSTOMER TO PROVIDE
KO SLUG/PENNY/OTHER
HARD FLAT PIECE FOR
SCREW END, WITH SOFT
TABLE WOOD
MOUNTING BRACKET
AND MOUNTING SCREW
(SEE BELOW)
(2) MOUNTING
BRACKET
5 MOUNTING BRACKET
POSITIONS TO ACCOMMODATE
VARIOUS TABLE THICKNESSES (2) MOUNTING
SCREW
3/8 MIN - 5/8 MAX R.
6-1/16

Shown with lid closed.
Shown with lid opened.
BEFORE TIGHTENING CABLE TIES, DO THE FOLLOWING:
1. Ensure loop for the A/C cord does not
touch any edge when in the open
position.
2. Test cycle the unit to ensure AC cord
make contact with any edges or
components inside the box.