FSR TB-IPS User manual

PDF provided by Conference Room AV
FSR TB-IPS-KITA Tilt Up AV Table Box with 2 AC, 1 HDMI, 1 VGA, 1 Data

FSR 244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: [phone] - Fax: [phone]
43065 LIT1510
TB-IPS Installation Instructions
1. DETERMINE LOCATION AND CUT 7-1/4 x 7-3/16 HOLE WITH
3/8 MIN - 5/8 MAX RADIUS CORNERS IN TABLE TOP.
2. INSTALL MOUNTING BRACKETS TO ASSEMBLY AND SECURE
TO TABLE BY SCREWING MOUNTING SCREWS TO UNDERSIDE
OF TABLE.
IPS PANEL
DIRECTION
7-1/4
TB-IPS ASSEMBLY
MOUNTING BRACKET
AND MOUNTING
SCREW INSTALLED
CUSTOMER TO PROVIDE
KO SLUG/PENNY/OTHER
HARD FLAT PIECE FOR
SCREW END, WITH SOFT
TABLE WOOD
MOUNTING BRACKET
AND MOUNTING SCREW
(SEE BELOW)
(2) MOUNTING
BRACKET
5 MOUNTING BRACKET
POSITIONS TO ACCOMMODATE
VARIOUS TABLE THICKNESSES (2) MOUNTING
SCREW
3/8 MIN - 5/8 MAX R.

3. INSTALL IPS PANELS (SOLD SEPERATELY) AND MAKE
ELECTRICAL CONNECTIONS AS REQUIRED.
TIE-WRAP POINT
TIE-WRAP POINT
TIE-WRAP POINT
RECOMMENDED
CABLE PATH
(OR MIRROR IMAGE)
IPS PANEL
(SOLD SEPERATELY)