Fujitsu UTZ-KXGB User manual

INSULATION KIT FOR HIGH HUMIDITY
(PART No. 9379022019-04)
Kit components
The following parts are included in the kit.
Attach the Ins cabinet C onto the outside of the indoor unit.
Attach the Ins cabinet E onto the outside of the indoor unit.
At this time, make sure that there is no gap among the surrounding heat insulator.
Attach the Ins top plate A, B, and C without any gap.
INSTALLATION MANUAL
1
4
3
UTZ-KXGA, UTZ-KXGB
Before installation, be sure to read this installation manual and follow its instructions.•
Be sure to read and use together with the installation manual of main units included with indoor units.•
To guarantee the safety of operation, when attaching the Insulation or installing the Decoration panel or connecting the connector, be•
sure to cut off the power supply.
This Insulation kit doesn't support the installation for Branched duct and Fresh air inlet kit.•
Align the slits of Ins cabinet A, B, C and D to the related hooks, and then attach onto the outside of the indoor unit.
2
Slit
4 Places
Ins cabinet D
Ins cabinet C
Ins cabinet B
Ins cabinet A
Ins cabinet C
Ins cabinet E × 4
Ins top plate A
Ins top plate B×2
Ins top plate C
SlitSlit
Ins top plate A
Ins top plate B
Ins top plate C
1
2
1
Ins cabinet A
Ins cabinet B
Ins cabinet C
Ins cabinet D
Ins cabinet E
1
1
1
1
4
Ins hook
4
Insulation panel B
2
Slit
Slit
Name and Shape Name and Shape Name and Shape Q'ty Q'ty Q'ty
388mm
858mm
Slit
(33-25/32 in.)
(15-9/32 in.)
9379022019-04_IM_EN.indd 19379022019-04_IM_EN.indd 1 11/22/2011 11:22:05 AM11/22/2011 11:22:05 AM

6
Piping
side
Drain
side
DISPLAY
Slit
Unit : mm (in.)
(1-31/32±1/8)
0 to 2
(0 to 3/32)
Insulation panel B × 2
Paste the Insulation panel B as shown in the following figure.
After fixing the indoor unit, attach the Ins hook onto hook (4 places).
5
4 Places
Push Push
Insert
Bend
Hook
Ins hook × 4
9379022019-04_IM_EN.indd 29379022019-04_IM_EN.indd 2 11/22/2011 11:22:57 AM11/22/2011 11:22:57 AM