Fujitsu FTP-62HWSL001 SERIES User manual

FUJITSU Component Thermal Printer
Mobile Printer
FTP-62HWSL001 Series
User's Guide
FUJITSU COMPONENT LIMITED

1
I In nt tr ro od du uc ct ti io on n
Thank you for purchasing the FTP-62HWSL001 Series Mobi e Printer (hereafter
referred to as “this product”).
This User's Guide (hereafter referred to as “this guide”) contains precautions to
use it safe y and correct y.
Before using this product, p ease read the comp ete this guide.
In addition, p ease keep this guide handy for future reference.
If you have any suggestions or comments about this guide, p ease do not
hesitate to contact us.
Bluetooth® is registered trademark of Bluetooth SIG.
Apple, iPod, iPhone and iPad are trademarks of Apple Inc, registered in the U.S. and
other countries.
Android is trademarks of Google Inc.
All other product names and service names are trademarks or registered trademarks of
their respective companies.
All Rights Reserved, Cop right FUJITSU COMPONENT LIMITED 2016

2
C Ca au ut ti io on ns s
■ Change of content
The contents of this guide and this product are subject to change without prior
notice.
■ Use in high safety applications
This product is designed, developed and manufactured for general use, such as
standard industrial, general, personal and household use. This product is not
designed, developed and manufactured for “high safet applications”, such as an
application which requires extremel high safet , which ma have a serious effect
on societ , expose individuals to serious danger (death, personal injur , severe
ph sical damage or other loss), if extremel high safet is not assured (including,
without limitation, nuclear reaction control in a nuclear facilit , aircraft automatic
flight control, air traffic control, transport control in a mass transport s stem,
medical equipment for life support, missile launch control of a weapons s stem), or
an application which requires extremel high reliabilit (including, without
limitation, submarine rela , space satellite).
If ou wish to use this product in an environment that requires high safet , please
consult with our sales representatives.
■ Copyright
This product and this guide are cop righted works of
FUJITSU COMPONENT LIMITED.
This product and this manual must not be reproduced, duplicated, used, or modified,
partiall or in full, without permission.

3
■ Export
This device ma contain commodities, technolog or software subject to export laws
and regulations from the US and other countries. Diversion contrar to the countr
law is prohibited.
■ Warranty
We shall not be responsible for an failure caused b wrong operation or usage in
the wrong environment.
Moreover, we cannot be responsible for the loss, the passive damages or the claim
b a third part , even if it is caused b use or failure of this product.
In addition, this product’s range of failure will never exceed the amount of mone
paid for it.

4
■ For USA
This equipment has been tested and found to compl with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequenc energ
and, if not installed and used in accordance with the instructions, ma cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined b
turning the equipment off and on, the user is encouraged to tr to correct the
interference b one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device ma not cause harmful interference, and
(2) this device must accept an interference received, including interference that
ma cause undesired operation.
Caution!
An changes or modifications not expressl approved b the part responsible for
compliance could void the user's authorit to operate the equipment.

5
■For CANADA
This device complies with Industr Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device ma not cause interference; and
(2) This device must accept an interference, including interference that ma cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of
RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian
information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la
section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs
peut obtenir l'information canadienne sur l'exposition et la conformité de rf.

6
S Sa af fe et ty y C Ca au ut ti io on ns s
■ Explanation of Symbols
The fo owing symbo s are used in this guide. P ease read and understand
the meaning of each symbo in this guide.
If this product shou d ma function, immediate y stop using it, and contact
your sa es representative.
Danger
Indicates an imminent risk of causing severe personal
injur or death if not used properl .
This level is not described in this document.
Warning Indicates possibilit of causing severe
personal injur or death if not used properl .
Caution
Indicates that a minor or some personal injur ma occur
or that the product itself or other user’s propert ma be
damaged.
Indicates an action that must not be performed.
Detailed description is on the side of this s mbol.
Indicates danger, warning and caution.
Detailed description is on the side of this s mbol.
Indicates an action that must be performed.
Detailed description is on the side of this s mbol.
Important Indicates important points b using this product.

7
■ General Cautions
Warning
Break-
down
- Do not use in the environment with corrosive gas or salt wind is
present.
Failure to observe this ma cause failure.
Modify
- Do not modify or disassemble.
Failure to observe this ma cause fire, explosion or
breakdown.
Fire
- Do not burn or heat.
Failure to observe this ma cause smoke, fire or breakdown.
Fire
- Do not pour water.
This equipment is not waterproof. Failure to observe this ma cause
fire, explosion or breakdown.
Fire
- Do not use or store the equipment in a hot environment.
Failure to observe this ma cause smoke, fire or breakdown.
Fire
- Do not throw or drop.
Failure to observe this ma cause fire, explosion or
breakdown.
Fire
- Do not use with wet hands. Do not drip or drop liquid such as
drinking water, clips or other foreign matter.
Failure to observe this ma cause fire or electric shock.
Fire
- In the event of heat, unusual smells, smoke or excessive noise
while using the product, please stop using it immediately. Unplug
the power cable, remove the battery.
Failure to observe this ma cause fire.

8
Caution
Injury
- Do not use while driving a vehicle or walking.
Failure to observe this ma cause traffic accidents and injuries.
Break-
down
- Do not use the printer near the equipment that generates large
radiation noise, such as a high voltage device and a large motor.
Failure to observe this ma cause malfunction or breakdown.
Fire
- Do not use under direct sunlight or dusty environment that
contains the oil and iron.
Failure to observe this ma cause heat, fire or failure.
Fire
- If charging is not completed within the specified time, unplug the
charger and stop charging.
The batter ma leak b overcharging.
Fire
- Do not apply force to the cable.
Failure to observe this ma cause fire or electric shock.
Break-
down
- eep the power line away from other devices which generate
noise. (Large motor etc.)
Failure to observe this ma cause malfunction or breakdown.
Faiure
- Before using this product, be sure to read complete user's guide.
It ma cause the failure b incorrect use.
Caution - Risk of explosion if
battery is replaced by an
incorrect type. Dispose of used
batteries according to the
instructions.

9
■ rinter
Warning
Accident
- Do not use the printer in a location where radio wave generation is
prohibited.
Might cause accidentall a malfunction of the instrument.
Burn
- During or immediately after operation, do not touch the print
head, the support plate and the motor. Heat is not immediately
discharged.
Failure to observe this ma cause burn injur .
Fire
- Do not put metal objects or flammable objects into the gaps of the
case.
Failure to observe this ma cause fire or electric shock.
Burn
- Surely turn off the printer's power and confirm that the printer
head is sufficiently cooled down before cleaning.
Failure to observe this ma cause burn injur .
Caution
Injury
- Never insert fingers or metal into the paper insertion and/or eject
slots of the paper cutter.
Failure to observe this ma cause equipment failure or injur .
Injury
- Be careful not to get a hand or hair caught in moving parts.
Failure to observe this ma cause burn injur .

10
■ Battery
Warning
Break-
down
- Do not use the battery for other device or purpose.
Failure to observe this ma cause destruction.
Modify
- Do not disassemble the battery.
Failure to observe this ma cause heat, fire or destruction.
Fire
- Only use the specified battery.
Failure to observe this ma cause fire or electric shock.
Fire
- Only charge the battery with the charger specified.
Failure to observe this ma cause fire or destruction.
Fire
- Do not short-circuit the electrode of the battery.
Failure to observe this ma cause heat, fire or destruction.
Fire
- Do not solder the terminal of battery.
Failure to observe this ma cause heat, fire or destruction.
Fire
- Do not make impact or pressure on battery.
Failure to observe this ma cause heat, fire or destruction.
Caution
Break-
down
- Remove the battery if the printer is not expected to be used for
long period.
Failure to observe this ma cause deterioration of the batter and
over-discharge state.
Break-
down
- Turn off the power of the printer before removing the battery.
Failure to observe this ma cause destruction.

11
■ AC Adapter
Warning
Break-
down
- Do not use the AC adapter for any other devices or purposes.
Failure to observe this ma cause damage to the printer and/or
batter .
Fire
- Only connect the AC adapter to the specified voltage and/or
frequency.
Failure to observe this ma cause fire or electric shock due to cable
disconnection.
Fire
- Only use the specified AC adapter.
Failure to observe this ma cause heat, fire or destruction.
Caution
Fire
- Please connect or remove the AC adapter after the power is turned
off.
Failure to observe this ma cause breakdown.
Break-
down
- If you do not use the AC adapter for a long time, please unplug the
power cable.
Failure to observe this ma cause electric shock or fire due to dust and
moisture.

12
■ Warning Label of roduct
This product comes with the following warning label.
This label must not be peeled off or erased from the display.
Moreover, please contact the distributor when the label is difficult to
see due to dirt, scratching etc.
Warning disp ay Content
HEAD ヘッド Do not touch the printer head and its support
p ate direct y, because it becomes hot during
printing.
GEAR & HOOK
ギア・フック Pay attention that fingers and hair do not get
caught in moving parts such as a gear or hook.
CAUTION 注意 P ease do not touch the cutter b ade when you
exchange the paper ro because it may cause an
injury.

13
T Ta ab bl le e o of f C Co on nt te en nt ts s
1 Preparation to Print ................................................................................. 14
1.1 Packaging .................................................................................... 14
1.2 Getting to Know the Printer .......................................................... 15
1.3 Inserting the Battery .................................................................... 19
1.4 Connecting AC Adapter Charging) ............................................... 20
1.5 Inserting the Paper ...................................................................... 21
2 Operating Procedures ............................................................................. 22
2.1 Power On ...................................................................................... 22
2.2 Test Print ...................................................................................... 23
2.3 Bluetooth Communication ........................................................... 25
2.4 Printer Error .................................................................................. 26
3 Indicator Lights ....................................................................................... 28
3.1 Normal Operation ........................................................................ 28
3.2 Charging ....................................................................................... 26
3.3 Printer Error .................................................................................. 27
3.4 Maintenance Mode ...................................................................... 27
4 Maintenance ........................................................................................... 30
4.1 Thermal Head............................................................................... 30
4.2 Platen Roller ................................................................................. 31
4.3 Paper Sensor ................................................................................ 31
5 Troubleshooting ..................................................................................... 32
6 Specifications ......................................................................................... 36
6.1 Printer Specifications .................................................................... 36
6.2 Paper Specifications ..................................................................... 37
7 Recycle .................................................................................................... 38
8 Appendix ................................................................................................ 39
8.1 Bluetooth Communication ........................................................... 39
9 Product Support ...................................................................................... 41

1 Preparation to Print
14
1
1 P Pr re ep pa ar ra at ti io on n t to o P Pr ri in nt t
1.1 Packaging
The following items are included.
There may be attachment of optional parts depending on a product
type.
If anything is missing, please contact the distributor.
Printer AC adapter
Battery AC Cable

1 Preparation to Print
15
1.2 Getting to Know the Printer
■ Front Side (Cover Closed)
Paper Cover : Cover to open and load paper.
Paper Cutter : To cut paper.
Operation Panel : Operates and Displays status of the printer.
Cover Open Lever : To open the cover.
AC Adapter Jack,
USB Connector : Open and connect AC adapter and USB Cable
Battery cover : Cover to open and insert the battery.
6
5
3
2
1
1
2
5
3
6

1 Preparation to Print
16
■ Operation Panel
Power Switch : To turn the power supply ON or OFF.
Feed switch : To Feed paper.
Status LE : Displays printer status.
Communication LE : Displays Communication status.
1
0
9
8
7
7
9
8
10

1 Preparation to Print
17
■ Front Side (Cover Open)
Platen Roller : To feed paper.
Warning Label : This shows warning when using printer.
Paper Sensor : This sensor detects the status of paper.
■ Back view (Cover Open)
Thermal Head : This applies heat to paper.
1
3
1
8
1
2
1
1
18
13
12
11

1 Preparation to Print
18
■ Side
Product Label : Displays printer type and
other product information.
Charge Terminal : Charge with the Cradle (Optional)
1
9
19
20
20

1 Preparation to Print
19
1.3 Inserting the Battery
1. Please slide co er lock and lift the
battery co er to open.
2. Insert the battery and
battery locking.
3. Please close battery co er and
push inside.
Co er lock slide 「LOCK」
direction.
Caution
Life of the battery is about 500 charges. (At the normal temperature)
If an old battery is used, not only the equipment malfunctions and this
might cause destruction.
Battery Cover
Cover Lock
Cover open
①
②
③
Cover close
①
②
③