Fujitsu ETERNUS DX500 S4 User manual

FUJITSU Storage
ETERNUS DX500 S4/DX600 S4,
ETERNUS DX500 S3/DX600 S3
Hybrid Storage Systems
Operation Guide (Basic)
Operation management/maintenance
P3AM-7742-12ENZ0

Table of Contents
1. Component Names and LED Names 10
Controller Enclosures .................................................................................................................... 10
Front .....................................................................................................................................................................10
Rear ......................................................................................................................................................................12
Components (Front)..............................................................................................................................................13
ETERNUS DX500 S4/DX600 S4 Components (Rear)................................................................................................16
ETERNUS DX500 S3/DX600 S3 Components (Rear)................................................................................................23
2.5"/3.5" Type Drive Enclosures ..................................................................................................... 28
Front .....................................................................................................................................................................28
Rear ......................................................................................................................................................................29
Components (Front)..............................................................................................................................................29
Components (Rear) ..............................................................................................................................................32
High-Density Drive Enclosure........................................................................................................ 34
Front .....................................................................................................................................................................34
Rear ......................................................................................................................................................................34
Components (Front)..............................................................................................................................................35
Components (Internal)..........................................................................................................................................37
Components (Rear)...............................................................................................................................................38
19-inch Racks................................................................................................................................ 41
Front .....................................................................................................................................................................41
Rear ......................................................................................................................................................................42
Power Distribution Units (for Regions other than the EMEIA, Central American, and Caribbean Re-
gions) ........................................................................................................................................... 43
Power Distribution Units (1U) ...............................................................................................................................43
Power Distribution Units (2U) ...............................................................................................................................44
2. Basic Operation 46
How to Open/Close the Rack Doors ............................................................................................... 46
How to Open/Close the Front Door ........................................................................................................................46
How to Open/Close the Rear Door .........................................................................................................................47
Powering On and Off..................................................................................................................... 49
Switching On and Off the Main Line Switch on the Power Distribution Unit (for Regions other than the EMEIA,
Central American, and Caribbean Regions)...........................................................................................................49
Switching On and Off the PSU Switch on the Power Supply Unit............................................................................53
2
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

Powering On .........................................................................................................................................................54
Powering Off .........................................................................................................................................................56
Using the Setting Change Switches............................................................................................... 58
3. Storage System Monitoring 60
Checking LED Status...................................................................................................................... 60
Displaying Status via ETERNUS Web GUI ....................................................................................... 60
Displaying Status via ETERNUS CLI ................................................................................................ 61
Event Notification ......................................................................................................................... 61
Audit Log ...................................................................................................................................... 63
4. Process Time (Estimated) 64
Volume Formatting Time .............................................................................................................. 64
Rebuild/Copyback Process Time .................................................................................................... 65
5. Expansion Functions 67
6. Maintenance 68
Periodic Backup ............................................................................................................................ 68
Maintenance Service..................................................................................................................... 68
Maintenance Support Period.................................................................................................................................68
Replacing Batteries ...............................................................................................................................................69
Related Service......................................................................................................................................................69
7. Troubleshooting 70
Check List...................................................................................................................................... 70
Required Information for Inquiries................................................................................................ 77
Table of Contents
3
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

List of Figures
Figure 1 Front View of a Controller Enclosure (with a Front Cover).........................................................................10
Figure 2 Front View of a Controller Enclosure (without a Front Cover)....................................................................11
Figure 3 Rear View of a Controller Enclosure (ETERNUS DX500 S4/DX500 S3) ........................................................12
Figure 4 Rear View of a Controller Enclosure (ETERNUS DX600 S4/DX600 S3) ........................................................12
Figure 5 Operation Panel (Controller Enclosure) ....................................................................................................13
Figure 6 PFM..........................................................................................................................................................14
Figure 7 Battery .....................................................................................................................................................15
Figure 8 Controller (ETERNUS DX500 S4)................................................................................................................16
Figure 9 Controller (ETERNUS DX600 S4)................................................................................................................17
Figure 10 Controller LEDs.........................................................................................................................................18
Figure 11 Host Interface for FC Cable Connections (4port) .......................................................................................19
Figure 12 Host Interface for LAN Cable Connections (4port) ....................................................................................19
Figure 13 Host Interface for FC Cable Connections (2port, Equipped with SFP+ Modules in All Ports) ......................20
Figure 14 Host Interface for Copper Twinax Cable Connections (2port)....................................................................20
Figure 15 Host Interface for LAN Cable Connections (2port) ....................................................................................21
Figure 16 Power Supply Unit (Controller Enclosure).................................................................................................22
Figure 17 Controller (ETERNUS DX500 S3)................................................................................................................23
Figure 18 Controller (ETERNUS DX600 S3)................................................................................................................24
Figure 19 Controller LEDs.........................................................................................................................................25
Figure 20 Host Interface (4port) ..............................................................................................................................26
Figure 21 Host Interface (2port) ..............................................................................................................................26
Figure 22 Power Supply Unit (Controller Enclosure).................................................................................................27
Figure 23 Front View of a 2.5" Type Drive Enclosure.................................................................................................28
Figure 24 Front View of a 3.5" Type Drive Enclosure.................................................................................................28
Figure 25 Rear Views of a 2.5"/3.5" Type Drive Enclosure .........................................................................................29
Figure 26 Operation Panel (2.5"/3.5" Type Drive Enclosure).....................................................................................29
Figure 27 2.5" Drives................................................................................................................................................30
Figure 28 Drive Slot Numbers (2.5" Type Drive Enclosure) .......................................................................................30
Figure 29 3.5" Drives................................................................................................................................................31
Figure 30 Drive Slot Numbers (3.5" Type Drive Enclosure) .......................................................................................31
Figure 31 I/O Module (2.5"/3.5" Type Drive Enclosure) .............................................................................................32
Figure 32 Power Supply Unit (2.5"/3.5" Type Drive Enclosure)..................................................................................33
Figure 33 Front View of a High-Density Drive Enclosure...........................................................................................34
Figure 34 Rear View of a High-Density Drive Enclosure............................................................................................34
Figure 35 Operation Panel (High-Density Drive Enclosure)......................................................................................35
Figure 36 Disk Activity Panel (DAP)..........................................................................................................................36
Figure 37 Drives for High-Density Drive Enclosures..................................................................................................37
Figure 38 Drive Slot Numbers for High-Density Drive Enclosures .............................................................................37
Figure 39 I/O Module (High-Density Drive Enclosure) ..............................................................................................38
Figure 40 Fan Expander Module ..............................................................................................................................39
Figure 41 Power Supply Unit (High-Density Drive Enclosure)...................................................................................40
Figure 42 Front View of a 19-inch Rack ....................................................................................................................41
Figure 43 Rear View of a 19-inch Rack .....................................................................................................................42
Figure 44 Power Distribution Unit (AC200-240V, 1U, 4 Outlets)...............................................................................43
Figure 45 Power Distribution Unit (AC200-240V, 1U, 4 Outlets)...............................................................................43
Figure 46 Power Distribution Unit (AC200-240V, 2U, 12 Outlets).............................................................................44
Figure 47 Power Distribution Unit (AC200-240V, 2U, 16 Outlets).............................................................................45
4
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

Figure 48 Power Distribution Unit (AC200-240V, 2U, 16 Outlets).............................................................................45
Figure 49 ON Position (Marked "|") of the Main Line Switches on a 1U Power Distribution Unit ..............................49
Figure 50 ON Position of the Main Line Switches on a 1U Power Distribution Unit ..................................................49
Figure 51 ON Position (Marked "|") of the Main Line Switches on a 2U Power Distribution Unit ..............................50
Figure 52 ON Position of the Main Line Switches on a 2U Power Distribution Unit ..................................................50
Figure 53 OFF Position (Marked "¡") of the Main Line Switches on a 1U Power Distribution Unit ...........................51
Figure 54 OFF Position of the Main Line Switches on a 1U Power Distribution Unit .................................................51
Figure 55 OFF Position (Marked "¡") of the Main Line Switches on a 2U Power Distribution Unit ...........................52
Figure 56 OFF Position of the Main Line Switches on a 2U Power Distribution Unit .................................................52
Figure 57 ON Position (Marked "|") of the PSU Switch on a Power Supply Unit ........................................................53
Figure 58 OFF Position (Marked "¡") of the PSU Switch of a Power Supply Unit ......................................................54
Figure 59 ETERNUS Web GUI Screen.........................................................................................................................60
Figure 60 Event Notification ....................................................................................................................................62
Figure 61 Audit Log..................................................................................................................................................63
List of Figures
5
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

List of Tables
Table 1 Status and Meanings of Each LED (Operation Panel (Controller Enclosure)) ............................................14
Table 2 Status and Meanings of Each LED (PFM)..................................................................................................14
Table 3 Status and Meanings of Each LED (Battery) .............................................................................................15
Table 4 Status and Meanings of Each LED (Controller) .........................................................................................18
Table 5 Status and Meanings of Each LED (Host Interface)...................................................................................21
Table 6 Status and Meanings of Each LED (Power Supply Unit) ............................................................................22
Table 7 Status and Meanings of Each LED (Controller) .........................................................................................25
Table 8 Status and Meanings of Each LED (Host Interface)...................................................................................27
Table 9 Status and Meanings of Each LED (Power Supply Unit) ............................................................................27
Table 10 Status and Meanings of Each LED (Operation Panel (2.5"/3.5" Type Drive Enclosure)).............................30
Table 11 Status and Meanings of Each LED (Drive (Drive Enclosure) (2.5"/3.5" Type)) ...........................................31
Table 12 Status and Meanings of Each LED (I/O Module (2.5"/3.5" Type Drive Enclosure)) .....................................32
Table 13 Status and Meanings of Each LED (Power Supply Unit (2.5"/3.5" Type Drive Enclosure))..........................33
Table 14 Status and Meanings of Each LED (Operation Panel (High-Density Drive Enclosure))..............................35
Table 15 Status and Meanings of Each LED (Disk Activity Panel (DAP))..................................................................36
Table 16 Status and Meanings of Each LED (I/O Module (High-Density Drive Enclosure)) ......................................38
Table 17 Status and Meanings of Each LED (Fan Expander Module) ......................................................................39
Table 18 Status and Meanings of Each LED (Power Supply Unit (High-Density Drive Enclosure))...........................40
Table 19 General Status of ETERNUS Web GUI.........................................................................................................60
Table 20 General Status of ETERNUS CLI .................................................................................................................61
Table 21 Volume Formatting Time..........................................................................................................................64
Table 22 Rebuild Process Time................................................................................................................................65
Table 23 Copyback Process Time.............................................................................................................................65
6
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

Preface
Fujitsu would like to thank you for purchasing the FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS
DX500 S3/DX600 S3 (hereinafter collectively referred to as ETERNUS DX).
The ETERNUS DX is designed to be connected to Fujitsu servers (Fujitsu SPARC Servers, PRIMEQUEST, or PRIMER-
GY) or non-Fujitsu servers.
This manual describes the operation management and maintenance of the ETERNUS DX.
This manual is intended for use of the ETERNUS DX in regions other than Japan.
Please carefully review the information outlined in this manual.
Twelfth Edition
April 2018
7
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

Trademarks
Third-party trademark information related to this product is available at:
http://www.fujitsu.com/global/products/computing/storage/eternus/trademarks.html
About This Manual
Intended Audience
This manual is intended for storage system administrators or system administrators who manage and maintain
the ETERNUS DX.
Related Information and Documents
The latest version of this manual and the latest information for your model are available at:
http://www.fujitsu.com/global/support/products/computing/storage/disk/manuals/
Refer to the following manuals of your model as necessary:
"Configuration Guide -Server Connection-"
"Configuration Guide (Power Synchronized Unit)"
Document Conventions
■Third-Party Product Names
•Oracle Solaris may be referred to as "Solaris", "Solaris Operating System", or "Solaris OS".
•Microsoft® Windows Server® may be referred to as "Windows Server".
■Notice Symbols
The following notice symbols are used in this manual:
Indicates information that you need to observe when using the ETERNUS storage system.
Make sure to read the information.
Indicates information and suggestions that supplement the descriptions included in this
manual.
Preface
8
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

Warning Signs
Warning signs are shown throughout this manual in order to prevent injury to the user and/or material damage.
These signs are composed of a symbol and a message describing the recommended level of caution. The follow-
ing explains the symbol, its level of caution, and its meaning as used in this manual.
This symbol indicates the possibility of serious or fatal injury if the ETERNUS DX is not used
properly.
This symbol indicates the possibility of minor or moderate personal injury, as well as dam-
age to the ETERNUS DX and/or to other users and their property, if the ETERNUS DX is not
used properly.
This symbol indicates IMPORTANT information for the user to note when using the ETERNUS
DX.
The following symbols are used to indicate the type of warnings or cautions being described.
Electric Shock
The triangle emphasizes the urgency of the WARNING and CAUTION contents. Inside the
triangle and above it are details concerning the symbol (e.g. Electrical Shock).
No Disassembly
The barred "Do Not..." circle warns against certain actions. The action which must be
avoided is both illustrated inside the barred circle and written above it (e.g. No Disassem-
bly).
Unplug
The black "Must Do..." circle indicates actions that must be taken. The required action is
both illustrated inside the black disk and written above it (e.g. Unplug).
How Warnings are Presented in This Manual
A message is written beside the symbol indicating the caution level. This message is marked with a vertical rib-
bon in the left margin, to distinguish this warning from ordinary descriptions.
A display example is shown here.
Warning level indicator
Warning type indicator
Warning details
•To avoid damaging the ETERNUS storage system, pay attention to the
following points when cleaning the ETERNUS storage system:
Warning layout ribbon
Example warning
- Make sure to disconnect the power when cleaning.
- Be careful that no liquid seeps into the ETERNUS storage system
when using cleaners, etc.
- Do not use alcohol or other solvents to clean the ETERNUS storage system.
CAUTION Do
Preface
9
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

1. Component Names and LED Names
This chapter provides the component names of the ETERNUS DX.
Controller Enclosures
An operation panel is in the front of the controller enclosure. The controllers and the power supply units are
installed in the rear.
Front
This section provides the names of the components in the front of a controller enclosure.
●With a Front Cover
Figure 1 Front View of a Controller Enclosure (with a Front Cover)
12
3 3
1. Operation panel
2. Front cover
3. Flange cover
10
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

●Without a Front Cover
Figure 2 Front View of a Controller Enclosure (without a Front Cover)
1
2
3
5
6
7
4
1. Battery (BBU#0)
2. Battery (BBU#1)
3. Battery (BBU#2)
4. PCIe Flash Module (CM#0, PFM#0)
5. PCIe Flash Module (CM#0, PFM#1)
6. PCIe Flash Module (CM#1, PFM#0)
7. PCIe Flash Module (CM#1, PFM#1)
1. Component Names and LED Names
Controller Enclosures
11
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

Rear
This section provides the names of the components in the rear of a controller enclosure.
●ETERNUS DX500 S4/DX500 S3
Figure 3 Rear View of a Controller Enclosure (ETERNUS DX500 S4/DX500 S3)
34
1
2
●ETERNUS DX600 S4/DX600 S3
Figure 4 Rear View of a Controller Enclosure (ETERNUS DX600 S4/DX600 S3)
34
1
2
1. Controller 0 (CM#0)
2. Controller 1 (CM#1)
3. Power supply unit (CPSU#0)
4. Power supply unit (CPSU#1)
1. Component Names and LED Names
Controller Enclosures
12
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

Components (Front)
This section describes the operation panel, PCIe Flash Module (PFM), and the batteries in the front of the con-
troller enclosure.
■Operation Panel
An operation panel has LEDs, a Power switch, and setting change switches.
Figure 5 shows the operation panel. Table 1 shows the status and meanings of each LED.
Figure 5 Operation Panel (Controller Enclosure)
2
3
1
4
65
87
AB
9 11
10
A. With a flange cover
B. Without a flange cover and a front cover
1. Power switch
This switch is used to turn on or off the ETERNUS DX.
2. POWER LED
3. IDENTIFY LED
4. FAULT LED
5. MAINTENANCE LED
6. CACHE LED
7. READY LED
8. REMOTE LED
9. MNT SW (maintenance switch)
This switch is used to switch the maintenance status on or off.
10. IP RST SW (IP reset switch)
This switch is used to initialize the LAN ports or to initialize the user information.
11. MST SW (CM Master Change switch)
This switch is used to change the Master CM.
1. Component Names and LED Names
Controller Enclosures
13
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

The LEDs turn on or blink to indicate the statuses that are listed below.
Table 1 Status and Meanings of Each LED (Operation Panel (Controller Enclosure))
LED name LED status Meanings
POWER
(green)
Power is supplied to the controller enclosure.
IDENTIFY (blinks blue) The installation location of the controller enclosure is identified
according to the instruction that is issued from ETERNUS Web GUI
or ETERNUS CLI.
FAULT (amber) (*1) The ETERNUS DX is in error status.
(blinks amber)
A part of the ETERNUS DX requires preventive maintenance.
MAINTENANCE
(green)
Maintenance for the ETERNUS DX is in progress.
(blinks green)
Maintenance (from ETERNUS Web GUI or ETERNUS CLI) for the
ETERNUS DX is in progress or a status check of the ETERNUS DX is
necessary.
CACHE (green) There is data in the cache memory of the ETERNUS DX.
READY
(green) (*1)
The ETERNUS DX is available for use.
REMOTE (green) The ETERNUS DX is turned on and off with the server.
*1: When the READY LED and the FAULT LED are both on at the same time, an error has occurred while the
Unified configuration is starting up.
■PCIe Flash Module (PFM)
A PFM is a module that is installed to operate the Extreme Cache function.
A PFM has LEDs.
Figure 6 shows the PFM. Table 2 shows the status and meanings of each LED.
Figure 6 PFM
12
1. READY LED
2. FAULT LED
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 2 Status and Meanings of Each LED (PFM)
LED name LED status Meaning
READY (green) The PFM is in normal status.
(blinks green)
The PFM is busy or temporarily unavailable.
1. Component Names and LED Names
Controller Enclosures
14
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

LED name LED status Meaning
FAULT (amber) The PFM is in error status.
■Batteries
Batteries are used for backup power source in case of power outage.
Batteries have LEDs.
Figure 7 shows the battery. Table 3 shows the status and meanings of each LED.
Figure 7 Battery
1234
1. BRDY LED
2. CHG LED
3. BCA LED
4. BTA LED
The states of LEDs are listed below.
Table 3 Status and Meanings of Each LED (Battery)
LED name LED status Meaning
BRDY
(Battery Ready) (green) The battery charge rate is 90% or more.
CHG
(Charge) (green) The battery is being charged or is ready for discharge.
BCA
(BCU Alarm) (amber) The battery is in error status.
BTA
(BTU Alarm) (amber) The battery is in error status.
1. Component Names and LED Names
Controller Enclosures
15
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

ETERNUS DX500 S4/DX600 S4 Components (Rear)
This section describes the controllers and the power supply units in the rear of the controller enclosure.
■Controller
The controller contains a CPU, cache memory, host interfaces, Bootup and Utility Device (BUD), and drive inter-
face (DI) ports. The controller controls all operations in the ETERNUS DX.
●Controller (ETERNUS DX500 S4)
Figure 8 shows the controller of the ETERNUS DX500 S4.
Figure 8 Controller (ETERNUS DX500 S4)
1 2
5734 6
1. Host interface (CA#0)
Install host interfaces.
2. Host interface (CA#1)
Install host interfaces.
3. FST (LAN) port
A port that is dedicated for maintenance engineers. Customers must not use this port.
4. RMT (LAN) port
This port is used for connecting a LAN cable and used for the remote support function. This port uses an RJ-45
connector.
5. MNT (LAN) port
This port is used for connecting a LAN cable and used for operation management. This port uses an RJ-45 con-
nector.
6. DI (OUT) port
This port is used to connect a controller enclosure to a drive enclosure with a mini SAS HD cable between enclo-
sures.
7. PWC port
This port is used to connect a power synchronized unit with an RS232C cable.
1. Component Names and LED Names
Controller Enclosures
16
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

●Controller (ETERNUS DX600 S4)
Figure 9 shows the controller of the ETERNUS DX600 S4.
Figure 9 Controller (ETERNUS DX600 S4)
1
3
2
4
7956 8
1. Host interface (CA#0)
Install host interfaces. For details, refer to "■ Host Interfaces" (page 19).
2. Host interface (CA#1)
Install host interfaces. For details, refer to "■ Host Interfaces" (page 19).
3. Host interface (CA#2)
Install host interfaces. For details, refer to "■ Host Interfaces" (page 19).
4. Host interface (CA#3)
Install host interfaces. For details, refer to "■ Host Interfaces" (page 19).
5. FST (LAN) port
A port that is dedicated for maintenance engineers. Customers must not use this port.
6. RMT (LAN) port
This port is used for connecting a LAN cable and used for the remote support function. This port uses an RJ-45
connector.
7. MNT (LAN) port
This port is used for connecting a LAN cable and used for operation management. This port uses an RJ-45 con-
nector.
8. DI (OUT) port
This port is used to connect a controller enclosure to a drive enclosure with a mini SAS HD cable between enclo-
sures.
9. PWC port
This port is used to connect a power synchronized unit with an RS232C cable.
1. Component Names and LED Names
Controller Enclosures
17
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

●Controller LEDs
Figure 10 shows the LEDs of the controller. Table 4 shows the status and meanings of each LED.
Figure 10 Controller LEDs
2134 5678 78
1. READY LED
2. FAULT LED
3. LAN ACCESS LED
4. LAN LINK LED
5. MASTER LED
6. IDENTIFY LED
7. DI (OUT) FAULT LED
8. DI (OUT) LINK LED
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 4 Status and Meanings of Each LED (Controller)
LED name LED status Meanings
READY (green) The controller is in normal status.
(blinks green)
An error has occurred during startup.
FAULT (amber)
(blinks amber)
•The controller is in error status.
•An error has occurred during startup.
LAN ACCESS
(blinks green)
Data is being sent or received via the LAN port (for operation
management).
LAN LINK (green) The link between the LAN port (for operation management) and
the destination has been established.
MASTER (green) The controller is set as a Master CM.
IDENTIFY
(blinks blue)
As ordered via ETERNUS Web GUI or ETERNUS CLI, the installation
location of the controller is identified.
DI (OUT) FAULT (amber)
•The link between the DI (OUT) port and the destination port is
in error status.
•The ports to remove the mini SAS HD cables between enclo-
sures from are indicated. This occurs while a drive enclosure is
being added.
(blinks amber)
The ports to connect the cables are indicated. This occurs while a
drive enclosure is being added.
DI (OUT) LINK (green) The link between the DI (OUT) port and the destination port has
been established.
1. Component Names and LED Names
Controller Enclosures
18
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

■Host Interfaces
A host interface is a board that has interface ports to connect a controller to the server.
Figure 11 through Figure 15 show host interfaces. Table 5 shows the status and meanings of each LED.
●Host Interface (for FC Cable Connections) (4port)
The ports on the host interface are used for connecting a controller to a server with an FC cable.
There are two types of 4port host interfaces for FC cable connections: FC 16Gbit/s and FC 8Gbit/s.
Figure 11 Host Interface for FC Cable Connections (4port)
12 3
4 5 6 7
1. CA READY LED
2. CA FAULT LED
3. LINK/FAULT LED
4. Host Interface Port #0
5. Host Interface Port #1
6. Host Interface Port #2
7. Host Interface Port #3
●Host Interface (for LAN Cable Connections) (4port)
The ports on the host interface are used for connecting a controller to a server with a LAN cable.
There is one type of 4port host interface for LAN cable connections: Ethernet 1Gbit/s.
Figure 12 Host Interface for LAN Cable Connections (4port)
12 3
4 5 6 7
1. CA READY LED
2. CA FAULT LED
3. LINK/FAULT LED
4. Host Interface Port #0
5. Host Interface Port #1
6. Host Interface Port #2
1. Component Names and LED Names
Controller Enclosures
19
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0

7. Host Interface Port #3
●Host Interface (for FC Cable Connections) (2port)
The ports on the host interface are used for connecting a controller to a server with an FC cable.
There are five types of 2port host interfaces for FC cable connections: FC 32Gbit/s, FC 16Gbit/s, FC 8Gbit/s, iSCSI
10Gbit/s, and Ethernet 10Gbit/s.
Figure 13 Host Interface for FC Cable Connections (2port, Equipped with SFP+ Modules in All Ports)
4 5
12 3
1. CA FAULT LED
2. CA READY LED
3. LINK/FAULT LED
4. Host Interface Port #0
5. Host Interface Port #1
●Host Interface (for Copper Twinax Cable Connections) (2port)
The ports on the host interface are used for connecting a controller to a server with a Copper Twinax cable.
There are two types of 2port host interfaces for Copper Twinax cable connections: iSCSI 10Gbit/s and Ethernet
10Gbit/s.
Figure 14 Host Interface for Copper Twinax Cable Connections (2port)
12 3
4 5
1. CA FAULT LED
2. CA READY LED
3. LINK/FAULT LED
4. Host Interface Port #0
5. Host Interface Port #1
1. Component Names and LED Names
Controller Enclosures
20
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0