Fujitsu M2488 User manual

C144-E018-03EN
M2488 CARTRIDGE TAPE DRIVE
USER’S GUIDE

C144-E018-03EN
Please complete the comment from at the back of this manual and send it by mail or facsimile to the
indicated address.
The contents of this manual may be revised without prior notice.
The contents of this manual shall not be disclosed in any way or reproduced in any media without the
express written permission of Fujitsu Limited.
All Rights Reserved, Copyright © FUJITSU LIMITED 1996, 1997

M2488 USER’S GUIDE REVISION HISTORY
C144-E018-03EN
REVISION HISTORY
(1/1)
Edition Date Revised Section
(Added/Deleted/Altered) Details
01 1996-03-06 — —
02 1996-06-12 Totally revised —
03 1997-04-03 Totally revised —
Sections with an asterisk (*) refer to the deleted parts in the previous edition.

M2488 USER’S GUIDE DIRECTORY
C144-E018-03EN
DIRECTORY
Comments concerning this manual can be directed to the following addresses:
FUJITSU LIMITED
International Marketing
Marunouchi 1-6-1, Chiyoda-ku, Tokyo 100 JAPAN
TEL: [phone]
FAX: [phone]
TLX: J22833
Cable: “FUJITSU LIMITED TOKYO”
FUJITSU COMPUTER PRODUCTS OF AMERICA, INC.
2904 Orchard Parkway, San Jose, California 95134-2017 USA
TEL:[phone]
FAX: [phone]
TLX: 230-176207
TWX: 910-338-2193
FUJITSU CANADA, INC.
6280 Northwest Drive, Massissauga, Toronto, Ontario, CANADA
TEL:[phone]
FAX: [phone]
TLX: 968132
FUJITSU EUROPE LIMITED
2, Longwalk Road, Stockley Park, West Drayion, Middlesex UB11 1AB, ENGLAND
TEL: [phone]
FAX: [phone]
TLX: 263871FEL SP G
FUJITSU DEUTSCHLAND GmbH
Rosenheimerstraße 145, D-8000, München 80, F.R. GERMANY
TEL: [phone]
FAX: [phone] or 78103
TLX:897106 FDG D
FUJITSU NORDIC AB
Torggatan 8, 171 54, Solna, SWEDEN
TEL: [phone]
FAX: [phone]
TLX: 13411 FNAB S
FUJITSU ITALIA S.p.A.
Via Melchiorre Gioia, 8, 20124 Milano, ITALIA
TEL: [phone]
FAX: [phone]
TLX: 350142FJITLY I
FUJITSU AUSTRALIA LIMITED
475 Victoria Avenue, Chatswood, N.S.W. 2067, AUSTRALIA
TEL: [phone]
FAX: [phone], 8362
TLX: 25233
FUJITSU HONG KONG LIMITED
R.M.1831, Sun Hung Kai Centre, 30 Harbour Road, HONG KONG
TEL: [phone]
FAX: [phone]
TLX: 62667
FUJITSU ESPAÑA, S.A.
Edificlo Torre Europa, Paseo de la Cestellana 95, Madred 28045, SPAIN
TEL:[phone]
FAX:[phone]
TLX:23887

M2488 USER’S GUIDE AGENCY STATEMENTS
C144-E018-03EN
AGENCY STATEMENTS
FCC
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
Important: Changes or modifications to this product not authorized by Fujitsu
Computer Products of America, Inc. could void the FCC Certification and
negate your authority to operate the product.
This product was tested for FCC Compliance under conditions that included
the use of shielded cables and connectors between system components. It is
important that you use shielded cables and connectors to reduce the possibility
of causing interference to radios, television sets and other electronic devices.
CSA
This digital apparatus does not exceed the class A limits for radio noise emissions from digital apparatus as set
out in the radio interference regulations of the Canadian Department of Communications.
Le present appareil numerique n’emet pas de bruits radioelectriques depassant les limites applicables aux appar-
eils numeriques de classe A prescrites dans le reglement sur le brouillage radioelectrique edicte par le Ministere
des Communications du Canada.

M2488 USER’S GUIDE PREFACE
C144-E018-03EN i
PREFACE
The M2488 User’s Guide provides the information necessary for the user to operate the M2488 Car-
tridge Tape Drive.
Chapter 1 Introduction
This chapter provides an overview of the M2488 Cartridge Tape Drive and its optional equipment.
Chapter 2 Installation Instructions
This chapter provides procedures for the preparation and assembly of the M2488 Cartridge Tape
Drive.
Chapter 3 Controls and Indicators
This chapter describes the controls, indicators and connectors for the M2488 Cartridge Tape Drive
and its optional equipment.
Chapter 4 Configuration
This chapter describes the configuration menus of the M2488 Cartridge Tape Drive.
Chapter5 Operating Instructions
This chapter provides procedures for operating the M2488 Cartridge Tape Drive and its optional
equipment.
Chapter 6 Maintenance and Servicing
This chapter describes the user maintenance and servicing of the M2488 Cartridge Tape Drive.
Chapter 7 Parts List
This chapter describes the M2488 models and optional equipment available.
The ANSI X3.131-199x SCSI specification may be purchased from:
American National Standard Institute, Inc.
1430 Broadway, New York, N.Y. 10018
Tel. [phone]
SCSI-2 unreleased documentation X3B5/87-099 may be obtained from:
Global Engineering Documents
2805 McGaw
Irvine, CA 92714
CONVENTION
Hexadecimal numbers are denoted by an “h” following the number (e.g. 23h) or 0xNN.
Binary numbers are denoted by a “b” following the number (e.g. 001b).