Func COOEE DESKING DIVIDER User manual

PAGE 1
ASSEMBLY GUIDE
x1 Desking Divider
CAUTION
• Clear area for install.
• Open box and check the content.
• Check the Clamp bracket and if top felt is found
remove it as shown.
• Installer is responsible for installing Cooee Desking
Divider correctly as per instructions.
COOEE
DESKING DIVIDER
0
CONTENTS FOR Desking Divider
x1
Cooee
Desking Divider
x2
Clamp Bracket
x4
Screw - 9.5mm
[0.375in] Long
Tools you will need:
5/32in
Allen Key
Two Person
Install
*IF TOP FELT PAD
IS FOUND REMOVE IT
FROM CLAMP BRACKET
Left Option Right Option
x1
Desk Screen
Connector
or

PAGE 2
ASSEMBLY GUIDE
Insert Clamp Brackets into position, tighten the screws using 5/32in Allen Key and ensure
mount is straight.
COOEE
DESKING DIVIDER
1
2
a.
Cooee Desking Divider is an universal part
and can be mounted as a left or right
option.
b.
Select your preferal side and mount Cooee
Desking Divider.
Tighten the knobs and secure the Desking
Divider in desire location.

PAGE 3
ASSEMBLY GUIDE
a.
If Desk Screen Connector will be in use
follow the recommended distance between
Desking Screen and Divider.
COOEE
DESKING DIVIDER
3
4
3.20in
81.3mm
3.20in 81.3mm
b.
Desking Divider has a middle layer with
special shaped cut-outs for fitting
Desking Conector and other accessories.
a.
Insert Desking Connector into the
corresponding pre-cut holes located
in Desking Divider as shown.
b.
Bend Desking Connector and reapeat same
procedure by fitting it to corresponding
pre-cut holes located in Desking Screen.