Func COOEE DESKING WING User manual

PAGE 1
ASSEMBLY GUIDE
x1 Desking Wing
CAUTION
• Clear area for install.
• Open box and check the content.
• Check the Clamp bracket and if top felt is found
remove it as shown.
• Installer is responsible for installing Cooee Desking
Wing correctly as per instructions.
COOEE
DESKING WING
0
CONTENTS FOR Desking Wing
x1
Cooee Desking Wing
x2
Clamp Bracket
Tools you will need:
One Person
Install
*IF TOP FELT PAD
IS FOUND REMOVE IT
FROM CLAMP BRACKET
Left Option Right Option or
Phillips Head
Screw Driver

PAGE 2
ASSEMBLY GUIDE
COOEE
DESKING WING
1
2
a.
Cooee Desking Wing is an universal part and
can be mounted as a left or right option.
b.
Desking Screen has a middle layer with
special shaped cut-outs for fitting Desking
Wing and other accessories.
a.
Insert Clamp Brackets into position,
tighten the bolts and ensure mount is
straight.
b.
Insert Desking Wing into the corresponding
pre-cut holes located in Desking Screen as
shown.
Bend Desking Wing, tighten the knobs and
secure the Desking Wing in desire location.