Func COOEE LOUVER WALL User manual

PAGE 1
ASSEMBLY GUIDE
2 Person Lift
CONTENTS FOR Cooee Louver Wall
x1 Cooee Louver Wall
Tools you will need:
a.
Lay Louver wall on table. b.
Hang bottom end off the table
to allow for base assembly.
Min 10”[254mm]
Overhang
x1
Louver Wall
x4
3/8”
Flange Nut
x4
3/8” 5” Long
Hex Bolt
x8
3/8” Washer
15/16” Spanner Quick grip7mm SpannerTwo Person
Install
CAUTION
x16
M4
Flange Nut
x2
Metal Base
Plates
x4
Lockable
Castors
x16
M4 Countersunk
Bolts
• Clear open space for install
• May need need a sturdy table.
• + 65lbs lift required
COOEE
LOUVER WALL
1
0

PAGE 2
ASSEMBLY GUIDE
a.
Lay metal bases on Louver wall.
b.
Clamp with quick grip.
Ensure Holes are aligned.
COOEE
LOUVER WALL
2
a.
Insert countersunk bolts, castors and M4
Flange nuts then tighten with 7mm Spanner.
Repeat for all bolts
b.
Ensure all bolts and castor’s are secure
4
a.
Insert 3/8 bolt, Washer and Flange Nut.
Ensure all bolts are in the same direction
1
3
x4
4
2
Torque= 45Ft-Lb
b.
Clamp with quick grip. Tighten bolts in
order and repeat -to prevent one bolt
tighter than the other.
Ensure Hole’s are aligned.
3
x16

PAGE 3
ASSEMBLY GUIDE
a.
Lift Louver Wall onto the ground. b.
Stand up and ensure Louver Wall is
able to move and castors can be
locked.
TO OPEN
TO CLOSE
COOEE
LOUVER WALL
5
x1 Assembled
Cooee Louver Wall
2 Person Lift