Func COOEE WALL ADJUSTABLE FEET User manual

PAGE 1
ASSEMBLY GUIDE
2 Person Lift
CONTENTS FOR Cooee Wall Adjustable Feet
x1 Cooee Wall
Adjustable Feet
Tools you will need:
a.
Lay Cooee Wall on table. b.
Untighten M4 Flange nuts with 7mm
Spanner. Remove countersunk bolts,
castors and M4 Flange nuts.
Repeat for all bolts
x1
Adjustable Feet
Housing
Set of Allen Keys7mm SpannerTwo Person
Install
CAUTION
x1
Leveling
Feet
x4
M4 Countersunk
Bolts
• Clear open space for install
• May need need a sturdy table.
• + 65lbs lift required
COOEE WALL
ADJUSTABLE FEET
1
0

PAGE 2
ASSEMBLY GUIDE
a.
Insert countersunk bolts, adjustable
feet housing and then tighten bolts
with right sizes Allen Key. Repeat
for all bolts
b.
After adjustable feet housing is
secure, insert leveling feet. Make sure
that leveling feet is longer then the
bottom of cooee wall.
COOEE WALL
ADJUSTABLE FEET
2
3
a.
Lift Cooee Wall onto the ground.
2 Person Lift
b.
Stand up and ensure Cooee Wall is stable.
Adjust leveling feet if needed.
CAUTION
• Cooee Wall Adjustable Feet pack comes as a single Feet.
• Mininum of two Adjustable Feet per Cooee wall required.
• If combination of x2 Castors + x2 Adjustable Feet
required. Adjustable Feet must be installed just on short
side of Cooee Wall. See pic.
Not Allowed Allowed