Furious FPV Fortini F4 OSD User manual

Please contact us if you need further assistance:
Tech support: [e-mail]
Sales support: [e-mail]
Website: http://furiousfpv.com/
FORTINI F4 OSD
Flight Controller
USER MANUAL VERSION 1.1

1
Contents
Contents..................................................................................................................................................1
Change Log..............................................................................................................................................2
v1.1.......................................................................................................................................................... 2
Introduction ............................................................................................................................................3
Features ..................................................................................................................................................3
Connections ............................................................................................................................................5
Connect with Receiver:.......................................................................................................................5
Using SPD15 Receiver: ............................................................................................................5
Using LR1000D Receiver: ........................................................................................................6
Using XSR FrSky Receiver: .......................................................................................................7
Using Spektrum Satellite Receiver:.........................................................................................7
Using TBS Crossfire Receiver:..................................................................................................8
Connect with Video Transmitter:........................................................................................................9
Using Stealth Race VTx:........................................................................................................... 9
Using Tramp HV VTx:.............................................................................................................11
Using TBS Unify Pro VTx:.......................................................................................................13
Using FX FX799T:...................................................................................................................15
External Device: ................................................................................................................................17
Connect Runcam Split2 using Stealth Race VTx....................................................................17
Connect Runcam Split2 using Tramp HV VTx........................................................................ 18
Connect Runcam Split2 using TBS Unify Pro VTx..................................................................19
Connect with GPS..................................................................................................................20
Connect with Lightning PDB:.............................................................................................................21
Connect with ESC 4 in 1: ...................................................................................................................22
Using Aikon SEFM 30A: .........................................................................................................22
Using Cicada 35x4 35A:.........................................................................................................23
Using T-Motor F 35A 4IN1-4S: ..............................................................................................24
Using Hobbywing XRotor Micro 40A 4in1:............................................................................25
Basic configuration................................................................................................................................26
Tips........................................................................................................................................................29
Guideline configuration OSD with BetaFlight ...................................................................................29
How to open camera setting by Transmitter....................................................................................30

2
How to open Betaflight OSD by Transmitter ....................................................................................31
VTx configuration by Transmitter .....................................................................................................32
PIDs tunning on Betaflight OSD ........................................................................................................33
Change Log
v1.1
Add External device:
- Connect Runcam Split2 using Stealth Race VTx
- Connect Runcam Split2 using Tramp HV VTx
- Connect Runcam Split2 using TBS Unify Pro VTx
- Connect with GPS

3
Introduction
Building upon the powerful Fortini F4, Furious FPV introduces the all new Fortini F4 OSD, introducing
new capability & functionality to simplify setup & redefine your next FPV experience. Hold on - it's
about to get really good.
Utilizing the cutting edge & feature packed Fortini F4 platform, we have introduced BetaFlight OSD,
with the full ability to alter every setting you need direct via your transmitter. No need for your PC -
just a few simple stick movements, and you're there - simple and straightforward, just the way it
should be.
From PID's, camera settings, VTx power and beyond, the Fortini F4 OSD builds upon the previous F4
with powerful and easy to use operating capability without the need of a PC. Need more? We added
a built in LC filter for even greater video image, allowing you to push the ragged edge with your next
FPV ride.
Designed to be nothing but the very best, the Fortini OSD utilizes high performance, low noise 32kHz
Invensense 20602 gyros, (5) UARTS, built in Input / Output Inrush Voltage Protection, and the
capability to allow S.PORT direct connection with the receiver without any aspect of receiver
modification. This massive feature dense packaging offers everything you could ever want from the
most sophisticated flight controller available today.
Feature rich and ultra-powerful, the Fortini is the full up package, breaking new ground in true FC
brilliance. Toss compromise out the window and open your FPV world to the most functional and
feature packed FC you have ever seen before.
Features
Built-in OSD
Built-in Camera OSD Control for FPV camera
Selectable 3.3V or 5V voltage for RX
Silicone damper for better anti-vibration
Fortini F4 OSD modifies camera settings by
transmitter
5x Serial UARTs for USB, SBUS, SPORT, TBS Receiver
or GPS, Telemetry VTX
Separate power supply for gyro with LDO low noise
and high accuracy
Built-in driver inverter for S-bus and Smart-Port connection directly to FC
Inrush voltage protection input and output by transient voltage suppressor
Invensense 20602 gyro for high speed 32khz, lowest noise floor and highest sensitivity
Weight: 5.5gr

4
Pinout
Dimensions
S

5
Connections
*WARNING: Fortini F4 OSD can support up to 6S Lipo battery but make sure other devices also
support it.
Connect with Receiver:
Using SPD15 Receiver:
You can buy SPD15 Receiver right here: https://goo.gl/FTnrpR

6
Using LR1000D Receiver:
You can buy LR1000D Receiver right here: https://goo.gl/4Cr0Hl
* NOTE: If you use LR1000D Receiver please go to CLI and type the following commands:
set sbus_inversion = OFF
save

7
Using XSR FrSky Receiver:
*NOTE: If telemetry of XSR is not working with FORTINI F4 OSD, please update
firmware for XSR receiver
Download firmware here: https://goo.gl/t1LMT5
Using Spektrum Satellite Receiver:

8
Using TBS Crossfire Receiver:

9
Connect with Video Transmitter:
Using Stealth Race VTx:
Using 5V from VTx to power Camera
*NOTE: Fortini F4 OSD can support up to 6S Lipo battery but make sure other devices also
support it.

10
Using Battery from VTx to power Camera
*NOTE: Fortini F4 OSD can support up to 6S Lipo battery but make sure other devices also
support it.

11
Using Tramp HV VTx:
Using 5V from VTx to power Camera
*NOTE: Fortini F4 OSD can support up to 6S Lipo battery but make sure other devices also
support it.

12
Using Battery from VTx to power Camera
*NOTE: Fortini F4 OSD can support up to 6S Lipo battery but make sure other devices also
support it.

13
Using TBS Unify Pro VTx:
Using 5V from VTx to power Camera
*NOTE: Fortini F4 OSD can support up to 6S Lipo battery but make sure other devices also
support it.

14
Using Battery from VTx to power Camera
*NOTE: Fortini F4 OSD can support up to 6S Lipo battery but make sure other devices also
support it.

15
Using FX FX799T:
Using 5V from VTx to power Camera
*NOTE: Fortini F4 OSD can support up to 6S Lipo battery but make sure other devices also
support it.

16
Using Battery from VTx to power Camera
*NOTE: Fortini F4 OSD can support up to 6S Lipo battery but make sure other devices also
support it.

17
External Device:
Connect Runcam Split2 using Stealth Race VTx

18
Connect Runcam Split2 using Tramp HV VTx

19
Connect Runcam Split2 using TBS Unify Pro VTx