Furious FPV FORTINI F4 User manual

Please contact us if you need further assistance:
Tech support: [e-mail]
Sales support: [e-mail]
Website: http://furiousfpv.com/
FORTINI F4
Flight Controller
USER MANUAL VERSION 1.2

1
Contents
Contents.....................................................................................................................................1
Change Log.................................................................................................................................2
Introduction ...............................................................................................................................3
Features .....................................................................................................................................3
Connections ...............................................................................................................................5
Connect with Receiver ...........................................................................................................5
Using SPD15 Receiver..................................................................................................5
Using LR1000D Receiver..............................................................................................6
Using XSR FrSky Receiver ............................................................................................7
Using Spektrum Satellite Receiver ..............................................................................8
Using TBS Crossfire Receiver.......................................................................................9
Connect with Video Transmitter..........................................................................................10
Using Tramp HV.........................................................................................................10
Using TBS Unify Pro...................................................................................................12
Using FX FX799T ........................................................................................................14
Connect with stack Mnova and Runcam..............................................................................16
Connect with Lightning PDB.................................................................................................17
Connect with other devices .................................................................................................18
Connect with ESC 4 in 1........................................................................................................19
Using Aikon SEFM 30A ..............................................................................................19
Using Cicada 35x4 35A ..............................................................................................20
Using T-Motor F 35A 4IN1-4S....................................................................................21
Using Hobbywing XRotor Micro 40A 4in1.................................................................22
Basic setup ...............................................................................................................................23
Tips...........................................................................................................................................25
4 Tips to setting up Fortini F4 FC with Damper....................................................................25
How to configure your Spektrum RX with your Flight Controller........................................25
Guideline configuration OSD with TRUE VISION CONFIGURATOR V1.0 ..............................27
How to open Piggy OSD menu by Transmitter ....................................................................28
How to set up CMS CANVAS mode on BetaFlight................................................................29

2
Change Log
v1.1
Add guideline configuration OSD with TRUE VISION CONFIGURATOR V1.0
New OSD Menu Index
How to set up CMS CANVAS mode on Betaflight
Change information in diagrams
v1.2
Add Tips setup Fortini F4 with Damper
Connect with Lightning PDB
Assambly with ESC 4 in 1
Connect with TBS Crossfire micro receiver v2

3
Introduction
After a full year of study & experience with the Radiance & KOMBINI Flight Controllers, we've
gathered every aspect of customer feedback in an ultimate effort to produce the single most cutting
edge Flight Controller the FPV market has ever seen. Hold on - you don't want to miss this.
Enter the all new Fortini F4 - the culmination of years of research and application as we push
forward into the outer limits of FPV. With a new high performance, low noise 32kHz Invensense
20602 gyro that features ultra-high sensitivity, this FC is designed for outright performance, offering
ultra-crisp flight characteristics that will be felt in every move you make. Want more? Don't worry -
just look below.
With a massive array of (5) UARTS, the Fortini F4 allows simultaneous connection of SBUS,
S.PORT, OSD, USB and either a TBS Smart Audio System or Immersion RC Tramp. Furthering this, the
Fortini F4 is the very first Flight Controller that offers built in input & output Inrush Voltage
Protection to protect the BEC and other electronic components in the case of extreme voltage spikes.
Soft mounted for the ultimate in vibration protection, the Fortini F4 features 16MB of integrated
flash memory, allowing BlackBox functionality to review all data after your flight. The Fortini F4 is
also the very first FC to allow S.PORT direct connection with the receiver without any aspect of
receiver modification.
The Fortini F4 is the full up package, breaking new ground in true FC brilliance. Toss compromise
out the window and open your FPV world to the most functional and feature packed FC you have
ever seen before.
Features
Invensense 20602 gyro for high speed 32khz, lowest noise floor and highest sensitivity
Separate power supply for gyro with LDO low noise and high accuracy
Gyro located as close as possible to the center
Integrated vibration dampening dummies
Built in driver inverter for S-BUS
Built in driver inverter for Smartport
connection directly to FC
MCU: STM32F405
Voltage and current ADC pins, for full
voltage and current monitoring
16MB of flash memory Blackbox
5x Serial UARTs for USB, OSD, SMART
AUDIO or TRAMP, SPORT, SBUS
RX powered via USB
Selectable 3.3V or 5V for RX

4
LED Driver for WS2812b programmable LED
Integrated buzzer driver
Built-in BEC 5V-2A supports direct 2-6S Lipo connection
Inrush Voltage Protection Input and Output by Transient Voltage SuppressorBoard Layout
Weight: 5.5gr
Dimensions

5
Connections
*WARNING: Fortini F4 can support up to 6s Lipo battery but make sure other devices also
support it.
Connect with Receiver:
Using SPD15 Receiver:
* NOTE: If you are using S.Port with firmware 3.1.7, please enter CLI mode
and type the following commands:
set sport_halfduplex = OFF
save
You can buy SPD15 Receiver right here: https://goo.gl/FTnrpR

6
Using LR1000D Receiver:
You can buy LR1000D Receiver right here: https://goo.gl/4Cr0Hl
* NOTE: If you use LR1000D Receiver please go to CLI and type the following commands:
set sbus_inversion = OFF
save

7
Using XSR FrSky Receiver:
* NOTE: If you are using S.Port with firmware 3.1.7, please enter CLI mode
and type the following commands:
set sport_halfduplex = OFF
save
*NOTE: If telemetry of XSR is not working with FORTINI F4, please update firmware for XSR
receiver
Download firmware at here: https://goo.gl/t1LMT5

8
Using Spektrum Satellite Receiver:
NOTE: When use Spektrum Satellite for Fortini F4, you must use battery for FC's power

9
Using TBS Crossfire Receiver:

10
Connect with Video Transmitter:
Using Tramp HV:
With Piggy V2 OSD
*NOTE: Fortini F4 can support up to 6s Lipo battery but make sure other devices also support it.

11
With Only Camera
*NOTE: Fortini F4 can support up to 6s Lipo battery but make sure other devices also support it.

12
Using TBS Unify Pro:
With Piggy V2 OSD
*NOTE: Fortini F4 can support up to 6s Lipo battery but make sure other devices also support it.

13
With Only Camera
*NOTE: Fortini F4 can support up to 6s Lipo battery but make sure other devices also support it.

14
Using FX FX799T:
With Piggy V2 OSD
*NOTE: Fortini F4 can support up to 6s Lipo battery but make sure other devices also support it.

15
With Only Camera
*NOTE: Fortini F4 can support up to 6s Lipo battery but make sure other devices also support it.

16
Connect with stack Mnova and Runcam:
*WARNING: Mnova is only compatible with 5V. Please solder only to 5V
pad if using Mnova
You can buy Mnova right here: https://goo.gl/JyQnds

17
Connect with Lightning PDB:

18
Connect with other devices:
*NOTE: Fortini F4 can support up to 6s Lipo battery but make sure other devices also support it.
You can buy LED STRIP right here: https://goo.gl/TXwSwI

19
Connect with ESC 4 in 1:
Using Aikon SEFM 30A:
*NOTE: Fortini F4 can support up to 6s Lipo battery but make sure other devices also support it.
You can buy ESC Aikon SEFM 30 4 in 1 right here: https://goo.gl/IOYBEr