Furniture of America CM-DK825 User manual

MODEL #
CM-DK825
Questions?
GIVE US A CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PT)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
(Included)
Allen Wrench
Recommended
1 / 12
VERSION # 21-07-15
Phillips
Screwdriver
(Not Included)

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 12

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
scratches and damages.
3 / 12

4 / 12

CORNER DESK
CM-DK825
5 / 12
Right Side Frame
#3 2pcs
Shelf Panel
#2 1pc
Small Table Top
#1 1pc
#5 1pc
Large Table Top
#4 1pc
Left Side Frame
#7 1pc
Cross Bar
#6 2pcs
Side Frame
#8 1pc
Support Bar
Large Tension Bar
#9 2pcs #10 2pcs
Small Tension Bar
#C 2pcs
Bolts Ø1/4" x 1-1/4"
#B 8pcs
Bolts Ø1/4" x 7/8"
#A 24pcs
Bolts Ø1/4" x 1/2"
#D 3pcs
Bolts Ø1/4" x 4"

6 / 12
#E 5pcs
Hex Nut
#F 6pcs
Flat Washers Ø5/8"
#G 1pc
Allen Wrench 4mm
#H 1pc
Wrench 14mm
#I 1pc
USB Port
#J 2pcs
Screws Ø3.5 x 15mm
#1
#4
#7
#9 #10
#5
#8
#3
#3
#2
#6

ASSEMBLY INSTRUCTIONS
1
2
7 / 12
#9
Part #9 x2pcs
Hardware #A x1pc
Hardware #E x1pc
#G
#A
#E
#H
#10
Part #10 x2pcs
Hardware #A x1pc
Hardware #E x1pc
#G
#A
#E
#H
Align tension bars (#9) to each
other, then secure by using bolt
(#A) with nut (#E).
Align tension bars (#10) to each
other, then secure by using bolt
(#A) with nut (#E).

ASSEMBLY INSTRUCTIONS
3
4
8 / 12
Part #4 x1pc
Part #5 x1pc
Hardware #C x2pcs
Part #7 x1pc
#5
#7
#4
#G
#C
Hardware #A x6pcs
Part #1 x1pc
#5
#1
#4
#G
#A
Align cross bar (#7) to the side
frames (#4,5), then secure by
using bolts (#C).
Align frames to the table top (#1),
then secure by using bolts (#A).

ASSEMBLY INSTRUCTIONS
5
6
9 / 12
Part #9 x2pcs
Hardware #A x4pcs
#5
#4 #9
#G
#A
Part
Hardware #B x8pcs
Part #6 x2pcs
#6
#3
#3
#3 x2pcs
#B
#G
Align tension bars (#9) to the
side frames (#4,5), then secure
by using bolts (#A).
Align shelf panels (#3) to the side
frames (#6), then secure by using
bolts (#B).

ASSEMBLY INSTRUCTIONS
7
8
10 / 12
#6
Hardware #A x2pcs
Part #8 x1pc
#5
#8
#G
#A
Part #10 x2pcs
Hardware #A x4pcs
#G
#A
#10
Align support bar (#8) to the frames
(#5,6), then secure by using bolts
(#A).
Align tension bars (#10) to the side frames,
then secure by using bolts (#A).

ASSEMBLY INSTRUCTIONS
9
10
11 / 12
#2
Hardware #A x6pcs
Part #2 x1pc
#G
#A
#1
#2
Hardware #D x3pcs
Hardware #E x3pcs
Hardware #F x6pcs #D
#F
#F
#G
#H
#E
Align table top (#2) to the frame, then
secure by using bolts (#A).
Secure both table tops (#1,2) by
using bolts (#D) with washers (#F)
onto nuts (#E) with washers (#F).

ASSEMBLY INSTRUCTIONS
11
12
12 / 12
Hardware #I x1pc
Hardware #J x2pcs
#I
#J