Furniture of America CM3060PC-2PK User manual

For more information contact our team: [email protected]

1) Align box seat (#7) to the chair back
(#1). Secure middle hole of seat (#7) to
chair back (#1) by using bolts (#C) with
washers (#F,G).
DO NOT FULLY TIGHTEN ALL BOLTS UNTIL FULL
ASSEMBLY OF PRODUCT IS COMPLETED.
2) Secure corner holes of the seat
(#7) to chair back (#1) by using
bolts (#E) with washers (#F,G).
1) Align right front leg (#2) to the seat,
then loosely secure by using bolts
(#D) with washers (#F,G).
2) Align right side stretcher (#4) to
the gaps of the chair legs, then
secure by using screws (#A).
3) Align front stretcher (#6) to the
front leg (#2), then secure by using
screw (#A).
PLACE CHAIR ONTO A TABLE UPSIDE DOWN

1) Align front leg (#3) to the seat
(#7), then loosely secure by using
bolts (#D) with washers (#F,G).
2) Secure front stretcher (#6)
to front leg (#3) by using
screw (#A).
3) Align left side stretcher (#5)
to the gaps of the legs, then
secure by using screws (#A).
Align wooden seat (#8) to the chair frame, then
secure by using screws (#B).