Furniture of America Meagan CM3152PC-2PK User manual

1 / 7
MODEL #
CM3152PC-2PK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
2 - People
EASY
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
DIFFICULT
VERSION # 20-03-10

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX7

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX7

4 / XXXXXXX7

5 / 7
HEIGHT CHAIR
CM3152PC-2PK
#1 1pc
HARDWARE
PARTS
HARDWARE
PARTS
#2 1pc #3 2pcs
Chair Back Cushion Seat
#A 4pcs #B 4pcs #C 3pcs #D 11pcs
Allen WrenchFlat washer
Lock washer
Front Leg Support
#E 11pcs #F 1pc
#4 1pc #5 2pcs
Leg(L&R)
PARTS
Screw #4 x 1-1/2"
#G 6pcs
x 2
x 2 x 2 x 2 x 2 x 2
x 2 x 2 x 2 x 2
x 2 x 2 x 2
Leg Support (L&R)
Bolt Ø1/4"x3-1/4" Bolt Ø1/4"x2-1/4" Bolt Ø1/4"x1-3/4"

6 / 7
1
Part #1 x1pc
Part #2 x1pc
Hardware #C x 3pcs
Hardware #D x 3pcs
Hardware #E x 3pcs
2
Hardware #A x 4pcs
Hardware #D x 4pcs
Hardware #E x 4pcs
#1
#2
#2
#1
#D #E
#A
#F
#D
#E
#F
#C
ASSEMBLY INSTRUCTIONS
Prepare 3 bolts assembly by inserting lock washer (#D), then
flat washer (#E) onto bolts (#C). Align seat cushion (#2) to the
holes of the chair back (#1), then secure with bolts (#C).
Prepare 4 bolts assembly by inserting lock washer (#D), then
flat washer (#E) onto bolts (#A). Secure the corner holes of
the seat cushion (#2) with bolts (#A).

7 / 7
3
Part #3 x2pcs
Part #4 x1pc
Part #5 x2pcs
Hardware #B x 4pcs
Hardware #D x 4pcs
Hardware #E x 4pcs
4
Hardware #G x 6pcs
#2 #3R
#F
#3L
#B
#D
#E
#G
#5R
#5L
#4
#5R
#5L
#4
#2
ASSEMBLY INSTRUCTIONS
Prepare 4 bolts assembly by inserting lock washer (#D), then flat
washer (#E) onto bolts (#B). Align front legs (#3R/L) to the holes
of the cushion seat (#2), then align the leg supports (#4,5) to the
gaps of the legs. Secure front legs (#3R/L) to seat cushion (#2)
with bolts (#B).
Secure leg supports (#4,5) with screws (#G).