Furniture of America Foster CM3437RT User manual

16-07-21

Before you begin, please read Page 2
of "Assembly and Care Advice".
And remember, do not tighten until
each step is completed or instructed.
Page 3 of 6
#1 x 1 pc
Table Top
#3 x 1 pc
Leg Stand
#4 x 1 pc
Base A
#2 x 4 pcs
Subjoin leg
#5 x 1pc
Base B
#6 x 1pc
Support shelf

#G
#H
#G
#H
Align subjoin legs (#2) to the
leg stand (#3) then insert.
Align base A and B (#4, #5) to the
leg stand (#3), then secure with
bolts (#A, #H) using the Allen
wrench (#G).

#G
Align subjoin legs (#2) to the
leg stand (#3) then insert.
1) Prepare 4 bolt assemblies.
Place lock washer (#C) onto the
long bolt (#A), then place flat
washer (#B) onto the same long
bolt (#A).
2) Align the support shelf (#6) to
the leg stand (#3), then insert bolts
(#A) and secure.

ASSEMBLY IS COMPLETED
1) Prepare 4 bolt assemblies. Place lock
washer
(#F) onto bolts (#D), then flat
washer
(#E) onto the same bolts (#D).
2) Align the leg stand to the table top, then
secure
with bolts (#D) by using an Allen
wrench
(#G).
Adjust leveler according to ground level.
1) Prepare 4 bolt assemblies. Place lock
washer (#F) onto bolts (#D), then flat
washer (#E) onto the same bolts (#D).
2) Align the leg stand to the table top, then
secure with bolts (#D) by using an Allen
wrench (#G).
Adjust leveler according to ground level.