Furniture of America CM3219RT User manual

1 / 7
MODEL #
CM3219RT
CM3219RT-EC
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
VERSION # 20-05-29

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX7

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX7

4 / XXXXXXX7

TABLE
5 / 7
#1 1pc
#A 8pcs
Bolt Ø5/16" x 2-3/4" Flat Washer
#C 8pcs #D 1pc
Allen Wrench
#2 1pc #3 4pcs
Table Top
Lock Washer
#B 8pcs
Table Shelf Leg
#E 4pcs #1
#2
#3
CM3219RT
CM3219RT-EC
Screw #8x44mm

ASSEMBLY INSTRUCTIONS
1
6 / 7
Hardware #A x6pcs
Hardware #B x6pcs
Hardware #C x6pcs
2
#D
#A
#B
#C
1. Prepare 6 bolt assemblies by first inserting a lock washer (#B) onto
the bolt (#A) then a flat washer (#C) onto that same bolt (#A).
2. Align three legs (#3) to the holes along the bottom of the table
top (#1), then insert the bolt assemblies from within and secure.
#E
Place the table shelf (#2) onto the
ridges along the legs, then insert
a screw (#E) into each hole at a
diagonal. Secure using a screwdriver.
Hardware #E x3pcs
#1
#3
Parts #1 x 1pc
Parts #3 x 4pcs
#2

ASSEMBLY INSTRUCTIONS
3
7 / 7
Hardware #A x2pcs
Hardware #B x2pcs
Hardware #C x2pcs
4
#D #A #B #C
1. Prepare 2 bolt assemblies by first
inserting a lock washer (#B) onto
the bolt (#A) then a flat washer
(#C) onto that same bolt (#A).
2. Align the leg (#3) to the holes
along the bottom of the table
top (#1) and the shelf (#2),
then insert the bolt assemblies
from within and secure.
#E
insert a screw (#E)into the hole at a
diagonal. Secureusing a screwdriver.
Hardware #E x4pcs