Furniture of America CM6908 User manual

Rev: 16-06-25

Left Back Cushion
Left Back Cushion
Right Back Cushion
Left Middle Back Cushion

A
lign the brackets along the bottom of the left backrest (#3) to the brackets along
the top of the left seat (#4). Insert and slide brackets until they are firmly secured.
Place the left arm (#1) onto the left side of the left seat (#4).
Note: Left and right is determined by facing the front on its upright position.
Align the brackets along the bottom of the left backrest (#3) to the brackets along
the top of the left seat (#4). Insert and slide brackets until they are firmly secured.
Note: Left and right is determined by facing the front on its upright position.
Place the left arm (#1) onto the left side of the left seat (#4).

Place the left back cushion (#7), left middle back cushion (#8), and left back cushion (#9).
LEFT SIDE COMPLETED
Place the left back cushion (#7), left middle back cushion (#8), and left back cushion (#9).
LEFT SIDE COMPLETED

1. Lift the right seat (#6)
to find the legs. Then
carefully place the right
seat (#6) onto its side
to install the legs.
2. Align the front legs (#11) to the two
front corners and back right corner.
Insert 2 screws (#A) into each leg
and secure using a Phillips screwdriver.
3. Align the rear legs (#12) to the left
back corner of the right seat (#6).
Insert 1 screw (#A) into the leg and
secure using a Phillips screwdriver.
Align the brackets along
the bottom of the right
backrest (#5) to the brackets
along the top of the right seat
(#6). Insert and slide brackets
until they are firmly secured.
Place the right arm (#2)
onto the right side of
the right seat (#6).
#12

Place the right back cushion (#10).
RIGHT SIDE COMPLETED
Place the right back cushion (#10).
RIGHT SIDE COMPLETED

A
lign the brackets along the sides of the left seat and right
seat. Insert and slide brackets until they are firmly secured.
Lift for
storage
Slide out
ASSEMBLY IS COMPLETED
Align the brackets along the
sides of the left seat and right
seat. Insert and slide brackets
until they are firmly secured.
Lift for
storage
Slide out