Furniture of America Berenice CM7580Q/EK User manual

Prepare 6 bolts assembly by inserting lock
washer (#B), then flat washer (#C) onto
bolts (#A). Align the headboard legs
(#2R/L) to the holes of the headboard
(#1). Make sure the HB legs (#2R/L) are
placed correctly. Secure with bolts (#A).
Prepare 2 bolts assembly by inserting lock
washer (#B), then flat washer (#C) onto bolts
(#A). Align the leg support (#3) to the bottom
holes of the headboard (#1). Secure with bolts
(#A).

Hook the side rails (#5) to the latch of the headboard (#1) and footboard
(#4). Make sure it is firmly resting on the latch.
Attach support legs (#8) to the center support slat (#7). Adjust
adjustable floor protectors on the support legs (#8) according to
ground level.

Align the slats (#6) to the center support slat and side rails. Secure with screws (#E).

Prepare 6 bolts assembly by inserting
lock washer (#B), then flat washer (#C)
onto bolts (#A). Align the headboard
legs (#2R/L) to the holes of the
headboard (#1). Make sure the HB legs
(#2R/L) are placed correctly. Secure
with bolts (#A).
Prepare 2 bolts assembly by inserting lock
washer (#B), then flat washer (#C) onto bolts
(#A). Align the leg support (#3) to the bottom
holes of the headboard (#1). Secure with bolts
(#A).

Hook the side rails (#5) to the latch of the headboard (#1) and footboard (#4).
Make sure it is firmly resting on the latch.
Attach support legs (#8) to the center support slat (#7). Adjust adjustable floor
protectors on the support legs (#8) according to ground level.

Align the slats (#6) to the center support slat and side rails. Secure with screws (#E).
Prepare 10 bolts assembly by inserting lock washer (#G), then flat washer (#H) onto bolts (#F). Align side rail
top panel (#9) to the top of the slats of the side rails. Secure with bolts (#F).