Furniture of America CM3546RT User manual

MODEL #
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
(Included)
Recommended
(Included)
Wrench
VERSION # 20-09-28
EASY DIFFICULT
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
Allen Wrench
2 - People
1 / 8
CM3546RT

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX8

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXX8XX

4/ XXXXXXX8

ROUND TABLE
#1 1pc
#A 8pcs
#2 1pc
Bolt Ø5/16" x 1-1/2"
Allen Wrench
#F 1pc
#3 1pc
#E 1pc
#B 12pcs
Lock Washer Ø5/16"
#C 12pcs
Flat Washer Ø5/16"
Table Top Support panel Pedestal
#D 4pcs
Nut Ø5/16"
Wrench Ø5/16"
#1
#4 4pcs
Legs
#2
#3
#4
#4
5 / 8
CM3546RT

Carton Disignation Part Hardware
#3
#2
6 / 8
CM3546RT is packed in 2cases
CM3546
RT-1
CM3546
RT-2
#4
Table Top #1
Support Panel
Pedestal
Legs
#Ax8pcs
#Bx 12pcs
#Fx 1pc
#C x12pcs
#D x 4pcs
#Ex 1pc

ASSEMBLY INSTRUCTIONS
1
2
Hardware
Hardware
Hardware
Part
Part
Hardware
Hardware
Hardware
Part
7 / 8
Prepare 4 bolts assembly by inserting lock washer (#B), then flat washer
(#C) onto bolts (#A). Align support panel (#2) to the holes of the
pedestal (#3), then secure with bolts (#A).
Insert the legs (#4) through the holes of the pedestal (#3), then place the flat washer (#C) and
lock washer (#B) onto the threaded bolts of the legs (#4) from the inside of the pedestal (#3).
Secure with nuts (#D).

ASSEMBLY INSTRUCTIONS
3
#A x4pcs
#B x4pcs
#C x4pcs
Part
4
1
8 / 8
Prepare 4 bolts assembly by inserting lock washer (#B), then flat washer (#C)
onto bolts (#A). Align the base of the table to the holes of the table top (#1).
Secure with bolts (#A).