Furniture of America CM7201D User manual

1. Align a keyhole slot (#A) to a wall near desired location, then
insert a long screw (#B) and use a power tool to secure.
2. Place the chest in position and align the other keyhole slot (#A) to
the back of the dresser then insert a short screw (#C) and secure.
3. Insert the tipping restraint (#D) into the remaining holes
on the keyhole slots (#A). Secure the strap accordingly.

Cut Strap
1. Carefully place the mirror (#1)
onto the dresser (#2), then
lift the mirror support rails
(#3) to align with the holes
along the back of the mirror.
2. Insert 3 screws (#A) into the top holes
along each support rail (#3) and
secure using a Phillips screwdriver.

insert 2 screws (#A) into the bottom holes along each
support rail (#3) and secure using a Phillips screwdriver.