Furniture of America CM7176T User manual

CM7176T
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
ASSEMBLY RATING
EASY DIFFICULT
1 / 9
TOOLS REQUIRED
MODEL #
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PST)
Questions?
3 - People
Recommended
VERSION # 20-11-07

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / 9

4 / 9

TWIN BED
CM7176T
Top Front
Headboard
#2 3pcs #3 1pc #4 2pcs #5 2pcs #6 2pcs
Side Rail
Right
Footboard
Leg Left Footboard
Leg Right Bed Slat -
1008x45x18mm
Pan Head Screw
M4 x 25mm Wood Dowel
M8 x 30mm Wood Dowel M8 x 20mm
Side Rail
Leg
5 / 9

ASSEMBLY INSTRUCTIONS
1
2
Part #1 x1pc
Part #4 x2pcs
Hardware #F x6pcs
X4 #F
#1
#4
Sticker R
Sticker L
Right
Left
Back View
NAIL LEG
#4
Align Headboard Leg(#4) to
the Top front Headboard(#1),
then secure by using pan
head screw(#F)
X12
Front View
Hardware #H x12pcs
#H
#1
#4
Turn-over the fixed part (#1)
& (#4) then insert the dowel
(#H) into pre drilled hole
provided on Headboard Leg
(L&R)(#4) as shown.
X6
6 / 9

ASSEMBLY INSTRUCTIONS
3
4
Back View
#2
#H
Align the Front Headboard
Panel (#2) on the fixed
dowel(#H) as shown.
Part #2 x3pcs
X12
Inner View
4.1
Front View
#4
Back View
Lift Headbord with
Upside down
position as shown
#F
Secure Headboard Leg
(L&R)(#4)and Front Headboard
Panel (#2) with Pan Head
Screw(#F) by thighten
with Screw Driver (NOT
PROVIDED) as shown..
Hardware #F x12pcs
#2
#2
#2
7 / 9

ASSEMBLY INSTRUCTIONS
6
DO NOT FULLY TIGHTEN SCREW
IN THIS STEP BEFORE ALIGN
THE SIDE RAIL AS SHOWN.
Part #5 x2pcs
Hardware #A x8pcs
Part #6 x2pcs
Part #9 x2pcs
Hardware #C x8pcs
Hardware #D x8pcs Align the side rail (#5) & (#&6) to the Side Rail Leg
(#9).Secure with
JCBC (#A),Spring washer (#C) and Flat washer
(#D).Tighten with Allen Key (#I).
Repeat the same step for other Side Rail Assembly.
#I
#C
#D
#A
#5
#6
#9
X8
Sticker R
Sticker L
NAIL LEG
5
Part #3 x1pc
Hardware #B x2pcs
#I
#B #3 #G
#7
#3
#C
#7
#8
Part #7 x1pc
Part #8 x1pc
Hardware #C x2pcs
Hardware #G x4pcs #K
Hardware #K x2pcs
Insert Dowel (#G) to the Footboard Panel (#3)
and attach Footboard Leg(L&R) (#7) & (#8)
accordingly secure with JCBC (#B), Spring
washer (#C) and Bend-Washer (K) . Tighten with
Allen Key (#I) as shown.
8 / 9

7
ASSEMBLY INSTRUCTIONS
Align the Side Rail (#5) and
(#6) to Headboard &
Footboard then secure by
tightening bolts.
#J
#5
#5
#6
#6
8
Part #10 x12pcs
#E
Align the Bed Slat
. (#10) to side rail
(#5)&(#6) and
tighten with Csk
Screw (#E) as per
diagram shown.
#10
#10
X24
leveler
#9
Part #E x24pcs
9 / 9