Furniture of America CM7683Q User manual

1 / 11
CM7683Q
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
VERSION # 20-07-29
3 - People
MODEL #

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX11

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX11

4/ XXXXXXX11

BED
CM7683Q
#1 1pc #2 2pcs #3 1pc
5 / 11
Headboard Footboard
Headboard Leg(L/R)
#4 2pcs
Side Rail
#5 3pcs
#6 2pcs
Slat
#A 6pcs #B 6pcs #C 6pcs
Bolt Ø5/16x1-3/4" Lock Washer
Ø5/16
#D 1pc
Allen Wrench M5
#F 2pcs #G 1pc
Flat Washer
Ø5/16
Support Rail
#8 1pc #9 3pcs
#E 2pcs
Bolt Ø1/4x1-1/4"
#H 8pcs #I 2pcs
Wood Dowel
#J 1pc
Lock Washer
Ø1/4 Flat Washer
Ø1/4 Screw #8x30mm Allen Wrench M4
Support Leg
32x32x150mm
Rail Support Leg
32x32x357mm
Footboard Leg
#7 1Set

Exploded View
#4
#6
#3
#2R
#1
#2L
#5
6 / 11
#7
#9
#8

Side Rail
Support Rail
Rail Support Leg
#Hx 8pcs
#E x 2pcs
#F x 2pcs
#Gx 1pcs
#J x 1pc
Carton Disignation Part Hardware
#4
#1
#3
#2
Headboard Leg
Footboard
Slat
Support Leg
#7
#A x 6pcs
#B x 6pcs
7 / 11
Footboard Leg
#6
#8
#9
CM7683Q-FB #5
CM7683Q-R
CM7683Q is packed in 3 cases
Headboard
CM7683Q-HB #Cx 6pcs
#D x 1pc
#Ix 2pcs

1
2
Part #1 x1pc
Part #2 x2pcs
Hardware #A x6pcs
Hardware #B x6pcs
Hardware #C x6pcs
8 / 11
ASSEMBLY INSTRUCTIONS
Hardware #I x2pcs
#2L
#2R
#1
#D
#A #B #C
#I
#4
#3
Part #3 x1pc
Part #4 x2pcs
1) Attach wood dowels (#I) to the top hole
of each headboard legs (#2R/L).
2) Prepare 6 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto
bolts (#A). Align headboard legs (#2R/L) to the holes of the headboard (#1), then secure
with bolts (#A).
Attach bun foot (#4) to the bottom holes of the footboard (#3).

LEVELER
#6
3
4
9 / 11
ASSEMBLY INSTRUCTIONS
Part #5 x3pc
#5
Part #6 x2pcs
Attach support legs (#5) to the holes at the bottom of the footboard (#3).
Adjust adjustable foot according to the ground level.
Hook the side rails (#6) to the latch of the headboard (#1) and footboard (#3).
Make sure it is firmly in place.

LEVELER
Part #8 x 1pc
Part #9 x3pcs
#9
#8
6
10 / 11
ASSEMBLY INSTRUCTIONS
Part #7 x1Set
Hardware #E x2pcs
Hardware #F x2pcs
Hardware #G x2pcs
#G
#F
#J
#E
#7
5
Attach support legs (#9) to the holes of the support rails (#8).
Adjust adjustable foot according to ground level.
Prepare 2 bolts assembly by inserting lock washer (#F), then flat washer (#G) onto bolts (#E).
Align slats (#7) to the holes of the support rail (#8). Secure with bolts (#E).