Furniture of America Euclid CM7206Q User manual

For more information contact our team: [email protected]

Prepare 6 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto
bolts (#A). Align legs (#2R/L) to the holes in the back of the headboard (#1), then
secure with bolts (#A) as shown in the picture.
Prepare 2 bolts assembly by inserting lock washer (#B),
then flat washer (#C) onto bolts (#A). Align leg support
(#3) in-between the holes of the headboard legs, then
secure with bolts (#A).

Hook the side rails (#5) through the gaps of the headboard (#1) and footboard (#4).
Make sure the side rails (#5) are firmly in place.
Attach the support legs (#8) to the center support (#7). Adjust the adjustable
floor protector according to ground level.

Align slats (#6) to each end of the side rails (#5). Secure the
slats (#6) to the side rails (#5) with screws (#E).

For more information contact our team: [email protected]

Prepare 6 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto
bolts (#A). Align legs (#2R/L) to the holes in the back of the headboard (#1), then
secure with bolts (#A) as shown in the picture.
Prepare 2 bolts assembly by inserting lock washer (#B),
then flat washer (#C) onto bolts (#A). Align leg support
(#3) in-between the holes of the headboard legs, then
secure with bolts (#A).

Hook the side rails (#5) through the gaps of the headboard (#1) and footboard (#4).
Make sure the side rails (#5) are firmly in place.
Attach the support legs (#8) to the center support (#7). Adjust the
adjustable floor protector according to ground level.

Align slats (#6) to each end of the side rails (#5). Secure the slats (#6) to the
side rails (#5) with screws (#E).
Prepare 10 bolts assembly by inserting lock washer (#G), then flat washer (#H) onto bolts (#F). Align side rail
top panels (#9) to each end of the side rails (#5), then secure with bolts (#F).