Furniture of America YNJ-1423-6 User manual

Page 1
The Assembly Rating is a 5-point system that
show the degree of effort needed in assem-
bling a specific product (with 1 being easy and
5 being difficult). For most products, two per-
sons are recommended.
Allen Wrench
Phillips Screwdriver
Hammer
(Included)
(Not Included)
(Not Included)
YNJ-1423-6
ASSEMBLY INSTRUCTIONS
ASSEMBLY RATING TOOLS REQUIRED FOR ASSEMBLY
14-09-09
EASY DIFFICULT 2 PERSONS RECOMMENDED

Page 1 of 15
Thank you for your purchase!
We hope you will enjoy your new product for many years to come. Our commitment
to providing quality products does not simply end when a purchase is made. We
stand behind our products and will provide any support needed in order for you to
fully enjoy your purchase. Your satisfaction is the greatest recognition we could
have.
Because we value your trust in our company, we will do our best to meet your
service expectations. Should you have any assembly related questions, parts
replacement requests, comments or suggestions, please feel free to contact us any
time. To help expedite the service, please have the assembly instructions available,
along with your order receipt.
[email protected]
www.foagroup.com
Toll-Free 1-888-980-5122 or 1-626-363-9311
1-626-270-4451
Monday to Friday 8:30 a.m. to 5:30 p.m. (PST)
https://twitter.com/foagroup
http://www.pinterest.com/foagroup/
http://instagram.com/foagroup#
https://www.youtube.com/user/FurnitureOfAmerica
Page 2

Page 3

Unless you are particularly adept at assembling flat-pack/knock-down
furniture, we understand building ready-to-assemble furniture can be a
frustrating experience for some. To help avoid confusion and to make
the assembly process quicker and smoother, we have provided some
helpful tips. Before you begin the assembly, please read the following:
1. Due to the size and/or weight on most of the ready-to-assemble furniture, it is
highly recommended that the assembly should be done near the area of its
intended location. Make sure you have enough space to move around during
the assembly. ALWAYS have at least two people to help with transporting and
assembling of the product to avoid any potential injury and/or damage.
2. To protect from damage, assemble the item on a clean, protective surface,
such as on a carpet or cardboard.
3. Make sure you have taken all the parts and hardware out of their packaging.
Do not throw away packaging material until assembly is completed.
4. Make sure all parts and hardware are accounted for by comparing the actual
parts and hardware to the list provided in the assembly instructions. Also
check for any irregularity such as crack, flaw or improperly drilled hole. If there
is any problem or missing piece, please contact the manufacturer or the
supplier. Please have the model number, part number and a brief description
of the problem ready will help expedite the replacement process.
5. Read the entire instruction manual and view the diagrams first before
assembling. Arrange your parts in order of use and group the identical
hardware together to make it easier to grab each piece as you begin to
assemble.
6. During the assembly process, make sure all parts are properly aligned before
tightening with the tool provided or required for the assembly. Do not use
power tools and do not over tighten.
7. When applying glue to the wood dowels to bond the parts together, please be
ABSOLUTELY certain that the parts are correct and lined up with each other
(refer to diagrams and take notice of the various pre-drilled hole locations).
When in doubt, assemble the parts together first and if the parts fit right, then
apply glue to the wood dowels.
PRE-ASSEMBLY INTRODUCTION
Page 4

CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS
ly
Page 5

TV STAND
ASSEMBLY INSTRUCTIONS
Please keep for future reference
MODEL # YNJ-1423-6
HARDWARE LIST
PARTS LIST
Before you begin, please
read “Assembly and
Care Advice”, “Pre-
Assembly Introduction”
and “Cam Lock Fastener
Assembly Instructions”.
Page 6
DIMENSIONS
60”(W) X 16.54”(D) X 20.47”(H)
60"
20.47"
16.54"
A1PC
2PCS
G
A
B1PC
C1PC
D1PC
E1PC
F1PC
H1PC
I1PC
J1PC
K2PCS
L2PCS
M2PCS
N2PCS
O1PC
P1PC
Q2PC
1PC
R
A
B
C
E
G
H
J
I
2PCS
6
4PCS
4PCS
5
26PCS
11 12 13
126PCS
2PCS
29PCS
50PCS
8PCS
415PCS
96PCS 81PC
P8 CS
10
7
23

STEP1
Hardware #1 = 12pcs
Hardware #3 = 3pcs
Hardware #5 = 2pcs
Hardware #6 = 4pcs
Hardware #7 = 8pcs
STEP2
Hardware #1 = 6pcs
Hardware #2 = 6pcs
Hardware #3 = 6pcs
Hardware #4 = 6pcs
ASSEMBLY INSTRUCTIONS
Page 7
D
2nd hole
Pull runner to align 2nd
hole on the other end
B
C
1
A
E
D
G
G
F
F
R
5
F
6
6
77
1
4
2
use allen key
to fasten allen-head
wood screw
prepare and insert wood
dowels into panels
3
312

STEP3
Hardware #3 = 12pcs
STEP4
Hardware #2 = 12pcs
ASSEMBLY INSTRUCTIONS
Page 8
3
prepare and insert wood
dowels into panels
3
12
2
B
C

ASSEMBLY INSTRUCTIONS
Page 9
STEP5
Hardware #4 = 2pcs
Hardware #5 = 5pcs
STEP6
Hardware #11 = 50pcs
Hardware #13 = 6pcs
H
O
P
4
5
13
11

ASSEMBLY INSTRUCTIONS
Page 10
STEP7
Hardware #1 = 8pcs
Hardware #2 = 8pcs
Hardware #3 = 8pcs
Hardware #5 = 8pcs
Hardware #9 = 2pcs
Hardware #10 = 2pcs
STEP8
Hardware #8 = 4pcs
3
12
3
55
55
59
8
Fasten screw
from drawer inside
1
I
J
K
L
M
1
2
prepare and insert wood
dowels into panels
prepare and screw cam
lock pin into panels
Q
K
L
M
I
I
J
J
N
N
and
10
X2
ASSEMBLY IS COMPLETED
Make sure the product is rested on a flat surface and does not feel loose or wobbly. If it does, double
check that the bolts/screws are secured and properly tightened.