Furuno GP-7000 Manual

COLOR GPS/PLOTTER GP-7000
Operator’s Guide
The purpose of this Operator's Guide is to provide basic operating procedures for this
equipment. For more detailed information see the Operator's Manual.
(Hard keys)
Key name Function
MENU key Shows/hides the menu bar.
DISP key Shows/hides DISPLAY MODE menu.
MOB/WPT key Short press: Enters a waypoint. Long press: Enters the MOB mark.
TLL/GOTO key Sets the waypoint or route as destination.
ROUTE key Creates the route.
CLEAR key Silences the audible alarm; erases the various windows one by one.
POWER/BRILL key Long press: Turns power off.
Short press: Turns power on. Shows the BACKLIGHT window.
RANGE key
Changes the range.
-: Shrinks the scale, and expands image.
+: Expands the scale, and shrinks image.
Cursor pad
Moves the cursor.
Card slots
Drive for chart/memory cards.
Soft keys
Change function according to screen
in use.
Hard keys
See below.
ENTER knob
Rotation: Selects
menu items.
Push: Confirms entry.

2
Returning Own Ship to Screen
Center
Press the CENTER soft key.
Adjusting Brilliance
1. Press the BRILL key to show the
BACKLIGHT window.
2. Rotate the ENTER knob to adjust the
brilliance.
3. Push the ENTER knob to close the
window.
Entering Waypoints
1. Operate the cursor pad to place the
cursor at the position desired.
2. Press the MOB/WPT key. Finally, press
the SAVE soft key.
Entering Routes
1. Operate the cursor pad to place the
cursor at the position desired.
2. Press the ROUTE key, and then press
the SAVE soft key.
3. Repeat steps 1 and 2 to complete the
route.
Setting Destination
Operate the cursor pad to place the cursor
on the waypoint you want to go, and then
press the GOTO key.
Setting Arrival Alarm
1. Press the MENU key.
2. Choose ALARMS from the menu bar,
and then push the ENTER knob.
3. Choose ARRIVALALARM and then
push the ENTER knob.
4. Rotate the ENTER knob to choose the
value, and then push it.
5. Enter the alarm range and then press
the SAVE soft key.
Plotter display
Cursor
Nav data
Own ship
mark
PUB.NO.OSE-44290-A1
(0409,HIMA) GP-7000