Furuno NAVNET TZTOUCH2 TZTL15F User manual

Home icon, power switch operations
Operational Overview
Tap
TZTL12F/TZTL15F
How to select a display
MULTI FUNCTION DISPLAY
TZTL12F/TZTL15F/TZT2BB
Operator’s Guide
Model
This guide provides the basic operating procedures for this equipment. For detailed information, see the Operator’s
Manual in the supplied CD-ROM. You can get the latest version of the manual by accessing the quick response code
at the back of this guide. Connection of sensors required.
iPhone, iPod and iPad are trademarks of Apple Inc. Android is a trademark of Google Inc. All brand and product
names are trademarks, registered trademarks or service marks of their respctive holders.
The screenshots in this manual are taken from the TZTL12F and TZTL15F. On-screen appearance for the TZT2BB
may differ slightly, depending on the monitor used.
Tap
Power switch
Power switch
- Turns on power
- Shows [Quick
Access] window.
Power offPower offPower off
Power offPower off
Power off function
only: Powers off this
unit.
Power off linked
function: Powers off
all NavNetTZ touch2
units in network.
Brilliance, Hue
Brilliance, HueBrilliance, Hue
Hue:
Brilliance*:
TZT2BB
SWITCH BOX
TZTL12F/15F: Adjust display brilliance.
TZT2BB: Adjust power lamp and key backlight brilliance.
Swipe downward from top of display
Quick pageQuick pageQuick page
Quick pageQuick page
Home screenHome screenHome screen
Home screenHome screen
Tap
Displays the
home screen.
Home icon
Home icon
Display icons
(max. 16 on home screen)
Home screenHome screenHome screen
Home screenHome screen
Long tap a display icon to edit, delete, resize, or
change its location.
Display icon long tapped
Edit Delete
Size
(large or
small)
Tap
“eGuide” provides
an abbreviated
operator’s guide.
How to edit a display icon
How to edit a display icon
Tap a display icon on the home screen
Tap a display icon on the home screen
OR
OR
Tap a display icon on the quick page
Tap a display icon on the quick page
Lists
TZTL15F
www.furuno.com
TZTL15F

Touchscreen operations
Tap
- Select an item on a menu.
- Select an object to show the corresponding
pop-up menu.
- Move the chart.
- Scroll the menu.
- Show slide menu, layer menu.
Zoom in Zoom out
Do the function assigned to
[Function Gesture] in the
[Settings] - [General] menu.
Drag, swipe
Pinch Two finger tap
Menu operation
- Zoom in, zoom out the plotter
and weather displays.
- Change the range on the radar
display.
Slider barSlider barSlider bar
Slider barSlider bar
Drag
Tap operation also
available.
Pop-up menu
Tap screen (applicable
point, object, etc.)
Tap the required function.
(”>” indicates additional options.)
Layer menu
Tap the required function.
Slide-out menu
Tap the required function.
Slide menuSlide menuSlide menu
Slide menuSlide menu
Swipe leftward from the right edge. Icon color and function state
Yellow: ON, White: OFF
Tap the [Home] icon.
Tap [Settings].
Drag menu to find required
item, then tap item.
Tap the required option.
Settings menu
Two finger drag
Change the viewpoint
position on the 3D display.
Zoom
in
Zoom
in
Zoom
in
Zoom
in
Zoom
in
Zoom
out
Zoom
out
Zoom
out
Zoom
out
Zoom
out
Swipe upward from
the bottom edge.
Layer menuLayer menuLayer menu
Layer menuLayer menu
2
2
Pop-up menuPop-up menuPop-up menu
Pop-up menuPop-up menu

33
Plotter
Swipe from the left edge of the screen rightward to show the data area at the left edge of the screen.
To hide the data area, swipe oppsite direction.
Data Area (Data Box)Data Area (Data Box)
Data area COG vector (broken line)COG vector (broken line)
Heading line
(yellowish-green solid line)
To add a data box;To add a data box;
Data box settings
Alarm MessageAlarm Message
Display range
Track
Return own ship
to screen center.
Orientation Mode
Switch between
NU and HU.
Switch between 2D
and 3D. (Drag upward
with two fingers also.)
2D: 3D
3D: 3D
Boat iconBoat icon
Inactive route
(sleeping)
(Departure or
arrival point,
selectable on
[Layers] menu.)
Point
Inactive route
(expanded)
Position Lost
Left: Undo
Right: Back
Slide bar
Long tap the data box to show
[Edit NavData] display.
Long tap the data box to show
[Edit NavData] display.
11
11Tap empty space on
the data box or
[+Add NavData].
Tap empty space on
the data box or
[+Add NavData].
2
2Tap a data
to add.
2
2
Tap a dataTap a data
o add.
to add.
Tap
Tap
Long
tap
Tap
Tap [Close] to finish.Tap [Close] to finish.
To delete a data box, or
change the displayed data;
To delete a data box, or
change the displayed data;
11
Tap
22
Tap
11Tap the data box to
delete or change.
Tap the data box to
delete or change.
22To delete the data box: Tap
the [Delete].
To change the data: Tap the
data to display.
To delete the data box: Tap
the [Delete].
To change the data: Tap the
data to display.
Tap
Tap [Change Type]
to change the data
display method
among Graphic
(analog), Numeric
(digital) and Graph.
Tap [Change Type]
to change the data
display method
among Graphic
(analog), Numeric
(digital) and Graph.
Grip icon: Drag the grip icon to
move the data box.
Grip icon: Drag the grip icon to
move the data box.

44
Points/boundaries
Points can be entered on the plotter display (radar and fish finder displays also) to mark important locations such as
a good fishing spot. Point attributes (position, symbol type, color, etc.) are recorded to the points list.
Also, boundaries can be set at the position desired (net position, area to avoid, etc.)
Tap where to enter a point.
The point is entered
on the screen.
Tap a point or the location
to set as destination.
On-screen point Selected location
On-screen pointOn-screen point
Points listPoints list
How to enter a point
Yellow line:
Shortest course from own
ship to the destination.
Purple line
(with arrow): Indicates
course to go to the
destination.
How to set a point as destination
Tap [Lists] on the
home screen.
Destination point
Lists
If a point was tapped.
NoticeNoticeNoticeNoticeNotice
Note: [Find on Chart] puts the
selected point at the screen center.
Sort the list by date, name, icon, color, range.
Tap the point to set as the destination.Tap the point to set as the destination.
How to set a boundary
Tap the position where to
set a boundary. Tap the shape to use for
the boundary.
[Area]/[Line]: Tap neces-
sary points to complete
the boundary, referring to
"Route" on the next page.
[Circle]: Drag icons to
adjust the size and
position, and then tap
[End Boundary].

5
5
Routes
A route is comprised of a series of waypoints leading to a destination. Routes are saved to the
routes list.
On-screen route
On-screen route
Routes list
Routes list
Tap the first point for
the route.
At the last point
Tap the next point for the route.
Repeat to enter all points for the route.
How to create a new route
How to follow a route
Tap a leg of the route.
T
l
f
t
h
t
Home screen
Sort list by date, name, color, length or range.
Tap the route.
Enter a name for the route, then tap [ ].
(Top right corner)
Lists
1st point
(route start point)
1st point
(route start point)
Last point
Last point

6
6
Radar
How to switch between standby and TX
How to switch between standby and TX
Tap to switch between
automatic and manual.
Drag the
slider/tap the
slider bar to
adjust.
How to adjust the gain / sea clutter / rain clutter
How to adjust the gain / sea clutter / rain clutter
TX
X
Tap
: Standby
: TX
TX
TX
Tap
“A” means automatic adjustment
“M” means manual adjustment
(At bottom of data area)
(Top right corner)
Radar Control
Data
area
Own ship position
Own ship position
Heading line
Heading line
Guard zone
Guard zone
Fixed range rings
Range
North mark
North mark
Slider
bar
RADAR
D
ATA
2
D
ATA 1
74
Tap
Radar Control
Gain
Auto adjustment mode
ol
Switch
Swit
ch
Tap
Switch
Manual adjustment mode
Move Own ship
position to center
(lower left side of
the screen)

7
7
Tap
Target
Target
Tap a target to show its range
and bearing from own ship.
How to measure the range, bearing from own ship to a target
How to set a guard zone
How to set a guard zone
A guard zone alerts you (with aural and visual alarms) when a radar target enters the area you
specify.
The guard zone appears in dashed
lines.
An icon appears at each corner
of the guard zone.
The dashed lines change to
solid lines, indicating the
guard zone is active.
Drag the icons to set guard zone.
20
30
40
60
Open the
[Layers] menu.
1
Tap dashed line on guard zone.
Tap
Guard zone
Guard zone
Tap the guard zone again.
Tap
ON
ON
ON
(Top right corner)
Goto
Goto
Goto

ON
Auto Acquire
8
8
ARPA Operation
ARPA is an anti-collision aid that tracks the movement of other ships to help prevent collision. ARPA not only tracks other ships
but also provides their navigation data. Targets can be acquired manually, automatically, or both automatically and manually.
How to show, hide ARPA symbols
How to manually acquire a target
Tap the target to acquire.
Target
Target
Tap
ARPA symbols
Automatic target acquisition
At acquisition Lost target
How to display target data
1
Within 30 seconds
after acquisition
1
ARPA symbols ON
ARPA symbols OFF
Acquire
Set a guard zone, then tap the
guard zone.
Open the [Layers] menu.
20
30
40
60
80
ARP
ON
A
A
A
AR
A
A
OFF
Tap an ARPA target to show its data.
4
ARPA symbol
ARPA symbol
Tap
Tap
ON
1
The dashed lines change to solid lines,
indicating the guard zone is active.
4

9
9
OR
CPA/TCPA alarm
CPA Line
The CPA/TCPA alarm releases an aural alarm and a visual alarm (message in Status bar) when both the CPA
and TCPA of a tracked target are equal to or lower than the CPA/TCPA alarm setting.
How to set the CPA/TCPA alarm
How to set the CPA/TCPA alarm
CPA: Closest point of approach
TCPA: Time to closest point of approach
How to acknowledge the CPA/TCPA alarm
How to acknowledge the CPA/TCPA alarm
How to enable the CPA Line feature
How to show the CPA Line
CPA Line
Own ship
ARPA target
Tap the alarm message (top of screen) to acknowledge the alarm and stop the aural alarm.
The CPA Line feature gives you a visual line that depicts the closest point of approach to a selected ARPA target. To
use this feature, own ship position and heading data is required.
CPA/TCPA Alarm
Home screen
H
H
Home screen
H
H
Set the alarm value, then tap [ ].
ON
Tap
Tap
㻻㻺
CPA Graphic Display
5

1010
AIS symbols ON
AIS symbols OFF
How to show or hide AIS target symbolsHow to show or hide AIS target symbols
AIS target symbols AIS target symbols
Proximity AIS target alarmProximity AIS target alarm
The proximity AIS target alarm releases aural and visual alarms when the distance between own ship and an AIS target is near
the alarm value.
How to show AIS target dataHow to show AIS target data
AIS (Automatic Identification System)
Home screen
H
H
F
URUN
O
98
7
65
4
321
Set the alarm value, then tap [ ].
20
30
60
Open the
[Layers] menu.
AISs
ON
OFF
ON
Tap an AIS target to show its data.
AIS symbolAIS symbol FURUNO
Tap
FURUNO
FURUNO
987654321
Color: Blue
SOG and
COG vector
Flashing
Color: Red
Color
- AIS target: Blue
- Cross: Red
Color
- AIS target: Green
- Cross: Red
Class A AIS
Activated
target
Dangerous
target
Lost
target
BFT* AIS
Class B AIS
Color: Green
SOG and
COG vector
SOG and
COG vector
Color: Blue (filled)
Color
- AIS target: Blue (filled)
- Cross: Red
*: Blue Force Tracking

29.8 ft 29.6ft
1111
Fish Finder
How to select a frequency
Low frequency: For “normal” use.
High frequency: For detailed observation of schools of fish.
Dual frequency: Show both the low and high frequency pictures.
29
Tap
(High Freq.)
(Low Freq.)
Single frequency
Dual frequency
How to show past echoes (echo history)
Swipe leftward or rightward
to show past echoes.
Return to normal display.
ACCU-FISH
ft
HF
ON
ON
ON
ON
(Top right corner)
ft
CC
ACC
ACC
ACC
ACC
ACC
AC
ACC
ACC
C
ACC
ACC
ACC
AC
AC
ACC
CC
C
C
A
ACC
A
ACC
A
AC
AC
A
ACC
A
A
ACC
C
AC
A
A
A
A
CC
C
CC
ACC
CC
C
C
CC
ACC
AC
CC
C
CC
C
A
C
C
C
C
C
C
C
CC
CC
C
A
ACC
A
C
C
C
C
C
A
C
C
U-F
U-F
U-
U-F
U
U-F
U
U
U-F
U-F
U-F
U
U-F
U-F
U-F
U-F
U
U-F
U
U-F
U-
U
U-F
U-F
U
U-F
F
-F
F
F
U-F
U-F
U-F
U-F
F
U
U
UF
UF
U
F
F
U
UF
F
U
F
U
U
U
F
F
U
F
F
ISH
ISH
S
IS
IS
IS
I
I
IS
S
S
S
S
S
IS
S
S
IS
IS
I
IS
S
S
S
IS
IS
I
I
S
IS
S
S
S
S
S
S
S
S
S
S
S
S
S
NoticeNoticeNoticeNoticeNotice
[TX/STBY] on the layer
menu toggles between
TX and standby.
Bottom echo
Depth scale
Fish symbol
*1
*
1
Requires appropriate transducer.
*
2
Requires water temperature
sensor.
Home icon
Bottom
echo
A-scope
display
Depth
Slider
bar
29.8 ft 29.6 ft
Temp .
scale*
2
Temp graph*
2
FrequencyFrequency
Note: Names of menu items may be changed depending on the transducer connected.Note: Names of menu items may be changed depending on the transducer connected.

12
12
How to select the operating mode
The fish finder is available in automatic and manual operation. For automatic operation, gain, clutter and
TVG are automatically adjusted.
m
atic and manual op
e
Auto mode
Manual mode
OR
ON
ON
ON
Manual mode
How to change the range
How to change the range
Pinch screen.
How to adjust the gain
How to reduce the clutter
A
-Sco
pe
Tap
Drag the slider to set the range.
(The slider bar can also be
tapped to set the range.)
Pop-up menu
How to adjust theHow to adjust the
Tap the fish finder screen
to show the pop-up menu.
Home screen
H
H
OF F
(Top right corner)
Drag the slider
to set the gain.
(The slider bar can also
be tapped to set the
gain.)
Gain(LF)
50
Tap
The larger the value, the
more the clutter is reduced.

13
ACCU-FISH
TM
/Bottom Discrimination/RezBoost
TM
Zoom display
Search for bottom
fish.
Find bottom contour
and hardness.
Short tail: Soft bottom
Long tail: Hard bottom
Tap
ON
ON
13
13
Raise the echo resolution (requires RezBoost
TM
capable transducer).
(Standard mode) (High resolution mode)
RezBoost
TM
ON
Fish size or depth
Fish symbol
NoticeNoticeNoticeNoticeNotice
You can select fish symbol type, and fish size or depth indication from the menu - go to home screen, [Settings], [Sounder].
ACCU-FISH
TM
Detected fish can be marked with a fish symbol (requires ACCU-FISH
TM
capable transducer).
Show probable bottom hardness
(requires bottom discrimination capable transducer).
Bottom Discrimination
p
ON
Bottom
discrimination
display
The most probable bottom material.
Rock
Gravel
Sand
Mud
Bottom
m
LF/HF
576 50/200 kHz
m
BL/HF
20.5 200 kHz
m
BZ/HF
20.5 200 kHz
Show the layer menu.

1414
How to enable the instrument display
Add an instrument display icon to the home to screen to show the instrument display.
With connection of appropriate sensors, the instrument display shows various navigation data.
Instrument Display
Tap
Tap
Drag
After setting, tap [ ].
(Incorporation in 3-way
screen is also possible.)
How to edit an instrument display
Tap the instrument display, then tap
[Edit Page] on the pop-up menu.
A white line surrounds each
indication.
In the edit mode, you can remove,
change, add, rearrange indications.
To end the edit modeTo end the edit modeTo end the edit modeTo end the edit modeTo end the edit mode
Tap the screen, then tap [End Edit] on
the pop-up menu.
Swipe up or down to switch
between displays.
How to switch instrument displays (ex. full display)
Full 1 displayFull 1 display Full 2 displayFull 2 display
Tap
In the edit mode, tap the
indication to remove or change.
How to remove or change an indication
In the edit mode, tap a location
not occupied by an instrument display.
How to add an indication
Tap a size in desired category. Added item appears at tapped
location.
Tap
Tap
- Remove indication: Tap [Remove].
- Change size: Tap [Small]*, [Medium], or
[Large].
- Change type: Tap [Change Type].
- Change indication: Tap indication in
[NAVIGATION DATA], [ROUTE INFOR-
MATION], [WIND AND WEATHER].
Note:
Drag the menu to show hidden items.
* Graphic, digital only
Edit modeEdit modeEdit modeEdit modeEdit mode

15
15
You can connect to the internet with the wireless LAN signal to download weather information and to
connect to an iPhone, iPod, iPad, or AndroidTM device.
Note: This procedure is not available from a monitor connected to the HDMI OUT2 port (TZT2BB only).
Wireless LAN Settings
How to connect to an existing LAN
Connect to the existing LAN to download weather data or update the software.
Home screen
H
H
Select [When Necessary], then tap “<”.
Select [Connect to existing LAN], then tap “<”.
X
X
XXX
XXX
XXXX
XXX
XXX
XXXX
Tap network required.
Enter the name of the network, then tap [OK].
ON

How to create a local wireless network
Create a local wireless network to connect to an iPhone, iPod, iPad, or Android device.
Home screen
Check that [When Necessary] is selected.
Check that [OFF] is selected. Select [Create Local Network], then tap “<”.
X
XXXXXXXX
X
XXXXXXXX
X X X X X X XX
Enter the name of the network, then tap [ ].
To change the network name, tap [Name].
Note: The default network name is the name of
your equipment. In this example, “TZTL12F ” is
the name of the network.
To change the password, tap [Password].
Note: A default password is automatically
generated.
Enter the password, then tap [ ].
ON Connect to the NavNet TZ touch
2 from the smartphone or tablet.
Pub. No. OSE-44870-F
(2007GREG) TZTL12F/15F/TZT2BB
䢲䢲䢲䢳䢻䢲䢲䢹䢳䢳䢷