Gama Sonic 94B001 User manual

US patents
# 7172307, 9458970
VICTORIAN BULB SOLAR
LAMP POST
Part # 94B001, 94B002, 94B003
Instruction Manual

Thank you for your purchase! GAMA SONIC® solar charged lights are brighter and last
all night with a typical solar charge. Unique design, superior light output and numerous
installation options confirm the outstanding value of our product. GAMA SONIC® has been
recognized as a worldwide leader in the lighting industry for over 20 years.
Please read the instruction manual carefully to obtain the best results from your purchase.
Visit our website or download the latest version of your instruction manual:
www.gamasonic.com or www.gamasonic.com/user-guides
Technical Assistance / Warranty Claims / Replacement Parts
Toll-Free number: [phone] (only within the US) or www.gamasonic.com
For optimum light duration throughout
the night, it is very important to mount
your solar lamp in a spot where it will
receive the maximum amount
of direct sunlight throughout
the day.
NOTE: For best results,
the solar light must be
charged in the “High or
Low” position for at
least 2 days of full
direct sunlight.
Gama Sonic’s patented Bulb technology
gives your solar lamp the look and feel
of a traditional incandescent lamp. This
helps to distribute light further than
traditional solar lamps.
Gama Sonic's Bulb Technology What’s In The Box
SolarLamp Location
page 2
CA B
D E F
K94B002 &
94B003 only
94B001 only
G
Concrete
Anchors
H/I
94B002 &
94B003 only
J
94B002 &
94B003 only
Bulb(s)

94B001
1. Using the provided template, mark and drill three holes into concrete
no larger than the provided anchors (G).
NOTE: For installation in the ground where pouring concrete is not preferred or
possible, use our EZ Lamp Post Anchor, model 30001 (sold separately) to quickly and
easily secure the lamp anywhere in your yard. This is only to be used with model
94B001.
2. Place the anchors (G) into the holes with
the threaded ends facing up.
3. Place the Base Pole (F) over the
anchors and secure using a wrench.
Cover the nuts with the provided
plastic covers.
4. Place the middle pole (E) on top of
the base pole (F) and secure with the
provided screws.
5. Attach the top pole (D) to the middle
pole (E), and the spacer pole (C) to the
top pole (D) by screwing the poles
clockwise.
6. Attach the fixture (B) to the spacer
pole (C) by twisting clockwise.
94B002/94B003
1. Using the provided template, mark and drill three holes into concrete
no larger than the provided anchors (G). (follow along with illustration
above for steps 1-5)
2. Place the anchors (G) into the holes with the threaded ends facing
up.
3. Place the Base Pole (F) over the anchors and secure using a wrench.
Cover the nuts with the provided plastic covers.
4. Place the middle pole (E) on top of the base pole (F) and
secure with the provided screws.
5. Attach the top pole (D) to the middle pole (E),
and the spacer pole (C) to the top pole (D) by
screwing the poles clockwise.
6. Remove the finial cap (K) from the centerpiece
(H/I) by removing the screws.
7. Insert one of the fixtures with arms (J) into the
centerpiece (H/I).
8. Screw in two bolts through the holes in the arm (J)
into the centerpiece (H/I) using the supplied hex
wrench.
9. Secure the two bolts using a nut inside the
centerpiece (H/I)
10. Repeat the installation for the second and third
lamp head (only second if installing double head
lamp).
11. Replace the finial cap (K) on the centerpiece (H/I) and
secure using the screws removed earlier.
12. With the help of another person, place the
assembly of lamp heads and centerpiece
(H/I) on top of the spacer pole (C) and twist
clockwise until fully attached to the pole.
1. Remove the top (A) from the Fixture by removing the two screw
caps.
2. Install the GS Solar LED Bulb by holding it by the base and twisting
it clockwise into the socket.
3. Replace the top (A) back on the fixture and secure with the two
screw caps.
4. Using the external switch, select your desired setting.
Low = Softer light output and longer duration
High = Brighter light output
5. The lamp will operate automatically at dusk.
Assembly InstructionsOperation Instructions
Replacement Batteries and Bulbs are available at
www.gamasonic.com or via our Toll Free number: [phone]
Your Lamp can use the following bulbs:
C37WW10W – included bulb with Warm White LEDs (2700K)
C37BW10W – bulb with Bright White LEDs (6000K)
F30WW05W – Flame bulb with simulated flame LEDs
T45WW10W – Edison LED Bulb with Warm White LEDs (2700k)
Your Lamp uses the following batteries:
GS32V30
Replacement Parts
page 3

Replacing the battery
page 4
Maintenance
Batteries are available for purchase at www.gamasonic.com
Troubleshooting
Clean the solar panels regularly with a damp towel to guarantee optimum performance. Do not use any type of
solvent for cleaning and be careful not to put too much pressure on the solar panels while cleaning.
WARNING: Do not dispose of Li-Ion batteries in the regular trash, municipal waste stream or by fire as batteries may
leak or explode. Do not open, short circuit, or mutilate batteries as injury may occur. Preserve our environment by
recycling Li-Ion batteries or disposing of them in accordance with local, State, and federal regulations. Do not mix old
and new batteries.
If your solar light does not come on as expected despite observance of all the instructions, please try the
following steps:
1.
2. Ensure the solar lamp is not positioned in the shade during the day.
3. Check that the batteries are installed correctly.
NOTE: The performance of the solar lamp will vary with the time of year. It will last longer when it has had a full
day in the sun rather than a day in overcast weather.
WARNING: Please keep out of reach of children. Do not dispose of the Li-Ion battery in the regular trash,
municipal waste stream or by fire as batteries may leak or explode. Do not open, short circuit, or mutilate
batteries as injury may occur. Preserve our environment by recycling Li-Ion batteries or disposing of them in
accordance with local, State and federal regulations. Do not mix old and new batteries.
WINTERTIME TIPS: For optimal performance, be sure to remove any snow or debris accumulation from solar
After several years of use, the battery may need replacing.
1. Make sure the lamp is in the OFF position.
2. Remove the top (A) from the fixture by removing the two screw caps.
3. Remove the GS Solar LED Bulb.
4. Remove the screw from the battery compartment cover on the silver reflector on the underside of the top (A).
5. Remove the battery and unclip the connector.
6. Make sure the new battery is a Gama Sonic – 3.2V/3,000mAh (Item GS32V30), Li-Ion Rechargeable Battery with
matching connector.
7. Clip in the new battery and install it into the battery compartment.
8. Re-assemble the top (A) by reversing steps 2-4.
9. Switch the lamp ON to your desired setting.