Gama Sonic BAYTOWN 106B50233 User manual

BAYTOWN BULB
SOLAR LAMP
Part #: 106B033, 106B133, 106B50233
Version 1.1
Instruction Manual
US Patent #9458970, 7172307

page 2
Thank you for your purchase. GAMA SONIC®solar charged lights are brighter and last all night
with a full day solar charge. Unique design, superior light output and numerous installation
options confirm the outstanding value of our product.
GAMA SONIC®has been recognized as a worldwide leader in the lighting industry for over 20
years. The company also offers unique multi-purpose rechargeable products that range from
party lights to emergency lighting products.
For technical Assistance/Warranty Claims/Replacement Parts
Toll Free Number: [phone] (only within the US),
Email:[e-mail]
visit our website or download the latest version of your instruction manual:
www.gamasonic.com Or www.gamasonic.com/user-guides
Please read the instruction manual carefully to obtain the best results from your purchase.
Tools that are needed but not supplied with the solar post lamps are:
a screw driver, power drill.
Solar Light Location
For optimum light duration throughout the night, it is very important to place your solar lamp in
a spot where it will receive the maximum amount of direct sunlight throughout the day.
NOTE: For best results, the solar lamp must be charged for two sunny days in the ON position.

Operation Instructions
Installation Instructions
page 3
1. Remove the Top (B) from Body part (C) by unscrewing the 2 screw caps. Install the new GS Solar LED Light Bulb by
turning it into the bulb socket located at the top of the light clockwise. Bulb needs to be installed before lamp is
turned on.
NOTE: When installing the GS Solar LED Bulb, hold it from its silver base not by the glass (Fig.3)
2. Turn the operation switch (Fig. 2) to either High or Low position according your preferences. The Solar Lamp will
automatically operate dusk to dawn.
3. Reattach the Top part (B) to the Body part (C) and secure with the 2 screw caps.
NOTE: There are specific types of screws for specific
surfaces. If unsure of the appropriate type of screw to use
on your desired surface please consult a professional.
Pier Mount
1. Using the base as a template,use a drill to make two
holes in the desired surface
2. Place the white screw anchors into the holes, place
the lamp in line with the holes and secure with the
provided screws.
3. Screw in part G into part C as shown in Fig. 1.
Wall Mount
NOTE: For best results, place your lamp in a spot facing
south.
1. Remove the silver bracket by removing the 2 screw
caps on the front face of the wall mount.
2. Screw the silver bracket onto the desired surface.
3. Place wall mount onto bracket and replace 2 wall
mount screw caps.
4. Slide part E through Part D as shown in Fig. 1.
5. Attach Part C to Part D by turning part E clockwise.
3" Fitter Mount
NOTE: If you are replacing an existing gas/electric post
light, you must consult a certified technician to cancel
them before installation.
1. Screw part F into part C as shown in Fig. 1.
2. Position Part (F) on top of the existing 3” post and
tighten it using the screws provided. Tighten the 3 set
screws - do not over-tighten.
Fig. 2
Fig. 3
Fig. 1

Replacing the Batteries
After several years of use, the batteries may need replacing.
1. Unscrew the two screw caps and detach part (B) from part (C). Make sure the ON/OFF switch is in the OFF (O)
position.
2. Unscrew the battery compartment screw, (Fig. 2) located on the silver reflector and remove the compartment door.
3. Unclip the connector and remove the old battery. Make sure the new battery (GS32V15) is high quality
3.2V/1,500mAh Lithium-ion Rechargeable battery with connector.
4. Clip on new battery and install into the battery compartment. Screw back battery compartment screw.
5. Reattach part (B) to part (C) and secure with the 2 screw caps.
** Batteries are available for purchase at www.gamasonic.com
Maintenance
Clean the solar panels regularly with a damp towel to guarantee optimum performance. Do not
use any type of solvent for cleaning and be careful not to put too much pressure on the solar
panels while cleaning.
Trouble Shooting
If your solar charged light does not come on at dusk despite observance of all the
instructions, please try the following steps:
1. Make sure that the solar light is not being affected by any other light source.
2. Ensure the solar light is not positioned in the shade during the day.
3. Make sure the switch in the lamp head is in the”ON” position.
4. Check that the batteries are installed correctly.
NOTE: The performance of the solar light will vary with the time of year. It will deliver more
light when it has had a full day in the sun rather than a day in overcast weather.
WINTERTIME TIPS: For optimal performance, be sure to remove any snow or debris
accumulation from the solar panel. A solar panel free of debris will charge the batteries
much more efficiently.
WARNING: Please keep out of reach of children.
WARNING: Do not dispose of Li-Ion battery in the regular trash, municipal waste stream or by
fire as batteries may leak or explode. Do not open, short circuit, or mutilate batteries as injury may
occur. Preserve our environment by recycling Li-Ion batteries or disposing of them in accordance
with local, State and federal regulations. Do not mix old and new batteries.
page 4