Gama Sonic Amphora 12B50023 User manual

Amphora Bulb Solar Light
Pier/3” Fitter Mount
Part #: 12B50023
Version 1.1
Instruction Manual
!
US Patent #7172307 #9458970

What's in the Box
!
!
!
!
!
!
!
!
!
!
page 2
Thank you for your purchase! GAMA SONIC®solar charged lights are brighter and last
all night with a typical solar charge. Unique design, superior light output and numerous
installation options confirm the outstanding value of our product. GAMA SONIC®has
been recognized as a worldwide leader in the lighting industry for over 20 years.
Technical Assistance/Warranty Claims/Replacement Parts
Toll Free Number: [phone] (only within the US) or www.gamasonic.com
Visit our website or download the latest version of your instruction manual:
www.gamasonic.com or www.gamasonic.com/user-guides
Please read the instruction manual carefully to obtain the best results from your purchase.
For best results, the solar light must be charged in the “ON” position (High or
Low) for at least 2 days of full direct sunlight.
Gama Sonic’s patented Bulb
technology gives your solar lamp
the look and feel of a traditional
incandescent lamp. This paired
with our patented cone reflector
helps to distribute light further than
traditional solar lamps.
Bulb
A. Top
B. Fixture
C. Pier Base
For optimum light duration throughout
the night, it is very important to mount
your solar lamp in a spot where it will
receive the maximum amount of direct
sunlight throughout the day.
Gama Sonic’s Bulb Technology
Solar Lamp Location

Assembly Instructions Operation Instructions
page 3
3” Fitter Mount
NOTE: If you are replacing an existing
gas/electric post light, you must
consult a certified technician to
disconnect them before installation.
• Slide the fixture (B) over your existing
3” post.
• Tighten the set screws to secure the
lamp in place.
NOTE: Do not over-tighten the set
screws.
• Follow the Operation Instructions to
turn the lamp on.
Pier Base Mount
Note: There are specific types of screws
for specific surfaces. If unsure of the
appropriate type of screw to use on
your desired surface, please consult a
professional.
• Using the pier base (C) as a template,
mark where the two holes will need to
be.
• Drill two holes no larger than the
included anchors.
• Place the anchors
into the holes and
secure the pier
base (C) using the
provided screws.
• Attach the fixture (B)
to the pier base (C)
by tightening the set
screws.
NOTE: Do not over-
tighten the set
screws.
• Follow the Operation
Instructions to turn
the lamp on.
•Remove the top (A) by twisting counter
clockwise.
•Insert the GS Solar LED Bulb by twisting
clockwise.
•Move the operation switch to the Low
or High position according to your
preferences:
• Low = softer light and longer duration
• High = brighter light output
•Reattach the top (A) to the fixture (B)
•The solar lamp will automatically operate
at dusk.
Replacement Parts
Replacement batteries and bulbs are
available at www.gamasonic.com or via
our Toll-Free number: [phone].
Your Lamp can use the following bulbs:
C37WW10W – included bulb with Warm
White LEDs (2700K)
C37BW10W – bulb with Bright White
LEDs (6000K)
F30WW05W –Flame bulb with simulated
flame LEDs
T45WW10W – Edison LED Bulb with
Warm White LEDs (2700k)
Your lamp uses the following battery:
GS32V15
!
!
!
!
!
!
!
!
!
!

Replacing the Batteries
After several years of use, the battery may need replacing.
1. Remove the top (A) from the fixture (B) by twisting
counter clockwise.
2. Switch the lamp to the Off position and remove the bulb.
3. Remove the battery compartment screw and cover.
4. Remove the battery and unclip the connector.
5. Make sure the new battery is a 3.2V/1500mAh Li-Ion
battery with matching connector (Item# GS32V15)
6. Clip in the new battery and install the battery in the
compartment.
7. Replace the battery cover and screw.
8. Re-install the bulb and switch the lamp back on.
9. Re-attach the top (A) to the fixture (B) by twisting clockwise.
Maintenance
Clean the solar panels regularly with a damp towel to guarantee optimum performance. Do not
use any type of solvent for cleaning and be careful not to put too much pressure on the solar
panels while cleaning.
Troubleshooting
If your solar light does not come on as expected despite observance of all the instructions, please try
the following steps:
1. Make sure that the solar lamp is not being affected by any other light source.
2. Ensure the solar lamp is not positioned in the shade during the day.
3. Check that the batteries are installed correctly.
NOTE: The performance of the solar lamp will vary with the time of year. It will last longer when it has
had a full day in the sun rather than a day in overcast weather.
WINTERTIME TIPS: For optimal performance, be sure to remove any snow or debris
accumulation from solar panel(s). A solar panel free of debris will charge the batteries much
more efficiently.
WARNING: Please keep out of reach of children. Do not dispose of the Li-Ion battery in the regular trash,
municipal waste stream or by fire as batteries may leak or explode. Do not open, short circuit, or mutilate
batteries as injury may occur. Preserve our environment by recycling Li-Ion batteries or disposing of them in
accordance with local, State and federal regulations. Do not mix old and new batteries.
page 4
Replacement Batteries and Bulbs are available at
www.gamasonic.com
!
!
!
!
!
!
!
!
!
!