Game Day Gear SKY 110130 User manual














•
•
•






●
●

●

●

●
●
●

●


●




MODEL:SKY 110130
10FT X 16FT
(3m x 4.8m)
POP UP WITH FOLD SIDES ET

4
Figure1
Figure 2
3
.
4
8
1.
2.
step1:
PLEASE NOTE:
If you want to put the folding sides down,
please fasten the leg and side tube together
with the help of velcro to avoid wind damage.
Open the canopy easy in four directions until partially
extended as in Fig simultaneously.
Hold the removable parts by hand and slide it to the
position of ball, the lock the four legs,
see Figure 1.
Pull the inner pole downward, fix the legs of outer
pole at the four horizontal poles, see Figure 2.
Please keep the top canopy on top of the frame when following the steps.
Below pictures are scenograph for easy understanding.
ASSEMBLY INSTRUCTIONPARTS LIST
Figure 3
Figure 4
Figure 5
step 2:
1. Connect tube E with tubes D as shown in upon picture.
2.
Insert the connected tubes into the side hole on fabric, do same on the other side,see Figure 3.
3.
Hold the braces on canopy sides, insert plastic part into the holes on legs,
then insert the slider plastic to the hole to fix,see Figure 4.
step 3:
1. Insert steal stake C into the hole on black plastic base, make it
fix on the ground, do same on other 3 legs,see Figure 5.
2. Make one end of the rope B tie with the plastic ring on canopy corner,
the other end tie with steel stake C, pull the ropes to suitable 4
directions, fix the steel stakes on the ground.
D
E
D