TMG TMG-DT5040CG User manual

►www.tmgindustrial.com 0/40 TOLL FREE:1-877-761-2819

►www.tmgindustrial.com 1/40 TOLL FREE:1-877-761-2819
MAIN SPECIFICATIONS :
Assembly size : W15.24 x L12 x H7.8 (m) / 50 x 40 x 25.6 (ft)
Outside width : 15.24 m / 50ft, inside width : 14.4 m / 47.4 ft, length : 12 m / 40 ft
Ridge peak height : 7.8 m / 25.6 ft
Peak clearance height : 7.2 m / 23.6 ft
It is your option to pick and callthe smaller door side as front or rear, then the wider door side will be called in an
opposite way.
PRIOR TO ASSEMBLY
Please go through the whole instruction manualcompletely. It is very important to follow your local safety
regulations and industry standards during installation. Regulations may include but are not limited to:
- Safety helmets, protective eyewear, and clothing
- Safety harnesses for all elevatedworkers
- Proper ladder, cage, and safetyoperation
Check all components and parts before installation. All parts are marked with a part
number, please refer to the parts list to ensure you have all parts.
Choose a day with low or no wind to install, it is hard to assemble with heavy wind. Do not make any alterations to
the structure. Do not hang any weight on the frame during installation, including parts. We are not responsible for
any damages or injuries caused by inappropriate installation, unauthorized modifications or extreme weather.
This building is not intended for human occupancy.
It is recommended to use heavy duty duct tapes to tape the tube connection joint spots to protect the cover from
damage and worn. It will help to extend the cover life span.
Check the parts list below to make sure all parts are received prior to assembly.

►www.tmgindustrial.com 2/40 TOLL FREE:1-877-761-2819
FRAME STRUCTURE DIAGRAM.

►www.tmgindustrial.com 3/40 TOLL FREE:1-877-761-2819
TMG-DT5040CF-PRO Part List
PARTS
CODE
GRAPHICAL
DESCRIPTION
LENGTH
QTY
BOX
1A
Peak arch tube
(for front and rear truss)
L2646mm
2
B
1
Peak arch tube
(for 4 middle trusses )
L2646mm
4
A
2A
Upper rafter tube
(for front and rear truss)
L2855mm
4
A
2
Upper rafter tube
(for middle truss)
L2855mm
8
A
3A
Lower rafter tube
(for front and rear truss)
L2855mm
4
A
3
Lower rafter tube
(for middle truss)
L2855mm
8
A
4A
Shoulder tube
(front and rear truss)
L2613mm
4
B
4
Shoulder tube
(for middle truss)
L2613mm
8
B
5B
Roof purl in
(horizontal tube)
φ58xL2440mm
45
A
5C
Front and rear wall and
front and rear span tube
φ58xL2890mm
18
A
5D
Front and rear wall tube
φ58xL2840mm
4
B

►www.tmgindustrial.com 4/40 TOLL FREE:1-877-761-2819
5L
Base plate for front and
rear truss left corners
W230xL479mm
2
B
5R
Base plate for front and
rear truss right corners
W230xL479mm
2
B
6
Base plates for middle
truss
W230xL479mm
8
B
6A
Ratchets
3T
44
B
6B
Tie down straps
(for #7A and front and rear
arches)
W38x800mm
44
B
7
Baseplate
W150xL200mm
2
B
7A
Baseplate
W150xL200mm
5
B
8
Lower vertical tube
(rear wall)
φ58xL2703mm
5
A
8A
Lower vertical tube
(rear wall left and right)
φ58xL2693mm
2
A
9
Upper vertical tube
(rear wall)
φ58xL1990mm
4
A
9A
Middle vertical tube
(rear wall middle)
φ58xL2022mm
1
A
10
Lower transverse tube
(rear wall middle)
φ58xL2270mm
2
B
10A
Lower transverse tube
(rear wall left and right)
φ58xL2367mm
2
B