Garmin A04272 User manual

Quick Start Manual 4
Manuel de démarrage rapide 19
Manuale di avvio rapido 37
Schnellstartanleitung 53
Guía de inicio rápido 71
Manual de início rápido 88

© 2021 Garmin Ltd. or its subsidiaries
Garmin®, the Garmin logo, ANT+®, and QuickFit® are trademarks of Garmin
Ltd. or its subsidiaries, registered in the USA and other countries.
™, Firstbeat Analytics™, and Garmin Dive™ are trademarks of
Garmin Ltd. or its subsidiaries. These trademarks may not be used without
the express permission of Garmin.
The BLUETOOTH® word mark and logos are owned by the Bluetooth SIG,
Inc. and any use of such marks by Garmin is under license. Other
trademarks and trade names are those of their respective owners.
El número de registro COFETEL/ FETEL puede ser revisado en el manual
a través de la siguiente página de internet.

Pairing Your Smartphone
To use the connected features
on your watch, you must pair it
directly through the Garmin
Dive™ app, instead of from the
Bluetooth® settings on your
smartphone.
1From the app store on
your smartphone, install
and open the Garmin Dive
app.
2During the initial setup,
select when you are
prompted to pair with your
smartphone.
3Follow the instructions in
the app to complete the
pairing and setup process.
Using the Watch
• Hold LIGHT to view the
controls menu.
The controls menu
provides quick access to
frequently used functions,
such as turning on do not
disturb mode, turning on
the battery saver feature,
and turning the watch off.
• From the watch face,
press UP or DOWN to
scroll through the glance
loop.
Your watch comes
preloaded with glances
that provide access to
health data, activity
information, on-device
Quick Start Manual 7
EN

• There is always a risk of
decompression sickness
(DCS) for any dive profile
even if you follow the dive
plan provided by the dive
tables or a diving device.
No procedure, diving
device, or dive table will
eliminate the possibility of
DCS or oxygen toxicity. An
individual's physiological
make up can vary from
day to day. This device
cannot account for these
variations. You are
strongly advised to remain
well within the limits
provided by this device to
minimize the risk of DCS.
You should consult a
physician regarding your
fitness before diving.
• Perform pre-dive safety
checks, such as checking
proper device function and
settings, display function,
battery level, tank
pressure, and bubble
checks to check hoses for
leaks.
• Do not dive with a gas if
you have not personally
verified its contents and
input the analyzed value to
the device. Failure to
verify tank contents and
input the appropriate gas
values to the device will
result in incorrect dive
planning information and
Quick Start Manual 9
EN

Single-Gas: This mode allows
you to dive with a single
gas blend. You can set up
to 11 additional gases as
backup gases.
Multi-Gas: This mode allows
you to configure multiple
gas blends and switch
gases during your dive.
You can set the oxygen
content from 5–100%.
This mode supports one
bottom gas, and up to 11
additional gases as
decompression or backup
gases.
NOTE: Backup gases are
not used in no-
decompression limit (NDL)
and time to surface (TTS)
decompression
calculations until you
activate them during a
dive.
CCR: This mode for closed-
circuit rebreather (CCR)
diving allows you to
configure two partial
pressure of oxygen (PO2)
setpoints, closed-circuit
(CC) diluent gases, and
open-circuit (OC)
decompression and
backup gases.
Gauge: This mode allows you
to dive with basic bottom
timer features.
NOTE: After diving in
gauge mode, the device
can only be used in gauge
Quick Start Manual 11
EN

or apnea mode for 24
hours.
Apnea: This mode allows you
to free dive with apnea-
specific dive data. This
mode has a higher data
refresh rate.
Apnea Hunt: This mode is
similar to the Apnea dive
mode, but tuned
specifically for
spearfishers. This mode
displays simplified in-dive
data, and disables start
and stop tones.
Dive Setup
You can customize the dive
settings based on your needs.
Not all settings are applicable
for all dive modes. You can
also edit the settings before
you start a dive.
Hold MENU, and select Dive
Setup.
See the owner's manual for
more information.
Starting a Dive
1From the watch face,
press START.
2Select a dive mode
(page 10).
3If necessary, press UP to
edit the dive settings, such
as the gases, water type,
and alerts.
4Wait with your wrist out of
the water until the device
12 Quick Start Manual
EN

acquires GPS signals and
the status bar is filled
(optional).
The device requires GPS
signals to save your dive
entry location.
5Press START until the
primary dive data screen
appears.
6Descend to start your dive.
The activity timer starts
automatically when you
reach a depth of 1.2 m (4
ft.).
7Select an option:
• Press DOWN to scroll
through the data
screens and dive
compass.
•Press START to view
the in-dive menu.
When you ascend to 1 m (3.3
ft.), the End Dive Delay timer
begins counting down. When
the timer elapses, the device
automatically ends and saves
the dive. You should keep your
wrist out of the water while the
device saves your dive exit
location.
Viewing the Dive Log Glance
The glance displays
summaries of your recently
recorded dives.
1From the watch face,
press UP or DOWN to view
the dive log glance.
Quick Start Manual 13
EN

2Press START to view your
most recent dive.
3Press DOWN > START to
view a different dive
(optional).
Viewing the Surface Interval
Glance
1From the watch face,
press UP or DOWN to view
the surface interval
glance.
2Press START to view your
oxygen toxicity units
(OTU) and central nervous
system (CNS) percentage.
NOTE: The OTU
accumulated during a dive
expire after 24 hours.
3Press DOWN to view your
tissue load details.
Device Information
Wearing the Device
• Wear the device above
your wrist bone.
NOTE: The device should
be snug but comfortable.
For more accurate heart
rate readings, the device
should not move while
running or exercising. For
pulse oximeter readings,
you should remain
motionless.
14 Quick Start Manual
EN

Tips for Solar Charging
To maximize the battery life of
your watch, follow these tips.
• When you are wearing the
watch, avoid covering the
face with your sleeve.
• When you are not wearing
the watch, point the face
toward a source of bright
light, such as sunlight or
fluorescent light.
The watch will charge
faster when exposed to
sunlight, because the solar
charging lens is optimized
for the spectrum of
sunlight.
• For maximum battery
performance, charge the
watch in bright sunlight.
NOTE: The watch protects
itself from overheating
and stops charging
automatically if the
internal temperature
exceeds the solar charging
temperature
thresholdpage 18.
NOTE: The watch does not
solar charge when
connected to an external
power source or when the
battery is full.
Quick Start Manual 17
EN

Specifications
Operating temperature range:
From -20º to 60ºC (from
-4º to 140ºF)
Underwater operating
temperature range: From
0º to 40ºC (from 32º to
104ºF)
Charging temperature range:
From 0º to 45ºC (from 32º
to 113ºF)
Solar charging: From 0º to
60ºC (from 32º to 140ºF)
Wireless frequency: 2.4 GHz
@ X dBm maximum
Depth sensor: Accurate from 0
m to 100 m (0 ft. to 328
ft.) complying with EN
13319
Resolution (m): 0.1 m until
99.9 m, 1 m at 100 m
Resolution (ft.): 1 ft.
Inspection interval: Inspect
parts before each use for
damage. Replace parts as
needed.1
Troubleshooting
Restarting Your Device
1Hold LIGHT until the
device turns off.
2Hold LIGHT to turn on the
device.
1 Aside from normal wear and tear,
performance is not affected by
aging.
18 Quick Start Manual
EN