GE Optima IGS 320 User manual

Optima IGS 320, Optima IGS 330
Pre-Installation Manual
OPERATING DOCUMENTATION
5537562-1-1EN
Revision 3

Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
2

Important Information
LANGUAGE
ПРЕДУПРЕЖДЕНИЕ
(BG)
Това упътване за работа е налично само на английски език.
•Ако доставчикът на услугата на клиента изиска друг език, задължение на
клиента е да осигури превод.
•Не използвайте оборудването, преди да сте се консултирали и разбрали
упътването за работа.
•Неспазването на това предупреждение може да доведе до нараняване на
доставчика на услугата, оператора или пациентa в резултат на токов удар,
механична или друга опасност.
警告
(ZH-CN)
本维修手册仅提供英文版本。
•如果客户的维修服务人员需要非英文版本，则客户需自行提供翻译服务。
•未详细阅读和完全理解本维修手册之前，不得进行维修。
•忽略本警告可能对维修服务人员、操作人员或患者造成电击、机械伤害或其他形式的
伤 害。
警告
(ZH-HK)
本服務手冊僅提供英文版本。
•倘若客戶的服務供應商需要英文以外之服務手冊，客戶有責任提供翻譯服務。
•除非已參閱本服務手冊及明白其內容，否則切勿嘗試維修設備。
•不遵從本警告或會令服務供應商、網絡供應商或病人受到觸電、機械性或其他的危
險。
警告
(ZH-TW)
本維修手冊僅有英文版。
•若客戶的維修廠商需要英文版以外的語言，應由客戶自行提供翻譯服務。
•請勿試圖維修本設備，除非 您已查閱並瞭解本維修手冊。
•若未留意本警告，可能導致維修廠商、操作員或病患因觸電、機械或其他危險而受
傷。
UPOZORENJE
(HR)
Ovaj servisni priručnik dostupan je na engleskom jeziku.
•Ako davatelj usluge klijenta treba neki drugi jezik, klijent je dužan osigurati prijevod.
•Ne pokušavajte servisirati opremu ako niste u potpunosti pročitali i razumjeli ovaj
servisni priručnik.
•Zanemarite li ovo upozorenje, može doći do ozljede davatelja usluge, operatera ili
pacijenta uslijed strujnog udara, mehaničkih ili drugih rizika.
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
Important Information 3

VÝSTRAHA
(CS)
Tento provozní návod existuje pouze v anglickém jazyce.
•V případě, že externí služba zákazníkům potřebuje návod v jiném jazyce, je zajiště‐
ní překladu do odpovídajícího jazyka úkolem zákazníka.
•Nesnažte se o údržbu tohoto zařízení, aniž byste si přečetli tento provozní návod a
pochopili jeho obsah.
•V případě nedodržování této výstrahy může dojít k poranění pracovníka prodejního
servisu, obslužného personálu nebo pacientů vlivem elektrického proudu, respektive
vlivem mechanických či jiných rizik.
ADVARSEL
(DA)
Denne servicemanual findes kun på engelsk.
•Hvis en kundes tekniker har brug for et andet sprog end engelsk, er det kundens
ansvar at sørge for oversættelse.
•Forsøg ikke at servicere udstyret uden at læse og forstå denne servicemanual.
•Manglende overholdelse af denne advarsel kan medføre skade på grund af elektrisk
stød, mekanisk eller anden fare for teknikeren, operatøren eller patienten.
WAARSCHUWING
(NL)
Deze onderhoudshandleiding is enkel in het Engels verkrijgbaar.
•Als het onderhoudspersoneel een andere taal vereist, dan is de klant verantwoorde‐
lijk voor de vertaling ervan.
•Probeer de apparatuur niet te onderhouden alvorens deze onderhoudshandleiding
werd geraadpleegd en begrepen is.
•Indien deze waarschuwing niet wordt opgevolgd, zou het onderhoudspersoneel, de
operator of een patiënt gewond kunnen raken als gevolg van een elektrische schok,
mechanische of andere gevaren.
WARNING
(EN)
This service manual is available in English only.
•If a customer's service provider requires a language other than English, it is the cus‐
tomer's responsibility to provide translation services.
•Do not attempt to service the equipment unless this service manual has been con‐
sulted and is understood.
•Failure to heed this warning may result in injury to the service provider, operator or
patient from electric shock, mechanical or other hazards.
HOIATUS
(ET)
See teenindusjuhend on saadaval ainult inglise keeles.
•Kui klienditeeninduse osutaja nõuab juhendit inglise keelest erinevas keeles, vastu‐
tab klient tõlketeenuse osutamise eest.
•Ärge üritage seadmeid teenindada enne eelnevalt käesoleva teenindusjuhendiga
tutvumist ja sellest aru saamist.
•Käesoleva hoiatuse eiramine võib põhjustada teenuseosutaja, operaatori või pat‐
siendi vigastamist elektrilöögi, mehaanilise või muu ohu tagajärjel.
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
4 Important Information

VAROITUS
(FI)
Tämä huolto-ohje on saatavilla vain englanniksi.
•Jos asiakkaan huoltohenkilöstö vaatii muuta kuin englanninkielistä materiaalia, tar‐
vittavan käännöksen hankkiminen on asiakkaan vastuulla.
•Älä yritä korjata laitteistoa ennen kuin olet varmasti lukenut ja ymmärtänyt tämän
huolto-ohjeen.
•Mikäli tätä varoitusta ei noudateta, seurauksena voi olla huoltohenkilöstön, laitteis‐
ton käyttäjän tai potilaan vahingoittuminen sähköiskun, mekaanisen vian tai muun
vaaratilanteen vuoksi.
ATTENTION
(FR)
Ce manuel d’installation et de maintenance est disponible uniquement en anglais.
•Si le technicien d'un client a besoin de ce manuel dans une langue autre que l'an‐
glais, il incombe au client de le faire traduire.
•Ne pas tenter d'intervenir sur les équipements tant que ce manuel d’installation et
de maintenance n'a pas été consulté et compris.
•Le non-respect de cet avertissement peut entraîner chez le technicien, l'opérateur
ou le patient des blessures dues à des dangers électriques, mécaniques ou autres.
WARNUNG
(DE)
Diese Serviceanleitung existiert nur in englischer Sprache.
•Falls ein fremder Kundendienst eine andere Sprache benötigt, ist es Aufgabe des
Kunden für eine entsprechende Übersetzung zu sorgen.
•Versuchen Sie nicht diese Anlage zu warten, ohne diese Serviceanleitung gelesen
und verstanden zu haben.
•Wird diese Warnung nicht beachtet, so kann es zu Verletzungen des Kundendienst‐
technikers, des Bedieners oder des Patienten durch Stromschläge, mechanische
oder sonstige Gefahren kommen.
ΠΡΟΕΙΔΟΠΟΙΗΣΗ
(EL)
Το παρόν εγχειρίδιο σέρβις διατίθεται μόνο στα αγγλικά.
•Εάν ο τεχνικός σέρβις ενός πελάτη απαιτεί το παρόν εγχειρίδιο σε γλώσσα εκτός των
αγγλικών, αποτελεί ευθύνη του πελάτη να παρέχει τις υπηρεσίες μετάφρασης.
•Μην επιχειρήσετε την εκτέλεση εργασιών σέρβις στον εξοπλισμό αν δεν έχετε
συμβουλευτεί και κατανοήσει το παρόν εγχειρίδιο σέρβις.
•Αν δεν προσέξετε την προειδοποίηση αυτή, ενδέχεται να προκληθεί τραυματισμός
στον τεχνικό σέρβις, στο χειριστή ή στον ασθενή από ηλεκτροπληξία, μηχανικούς ή
άλλους κινδύνους.
FIGYELMEZTETÉS
(HU)
Ezen karbantartási kézikönyv kizárólag angol nyelven érhető el.
•Ha a vevő szolgáltatója angoltól eltérő nyelvre tart igényt, akkor a vevő felelőssége
a fordítás elkészíttetése.
•Ne próbálja elkezdeni használni a berendezést, amíg a karbantartási kézikönyvben
leírtakat nem értelmezték.
•Ezen figyelmeztetés figyelmen kívül hagyása a szolgáltató, működtető vagy a beteg
áramütés, mechanikai vagy egyéb veszélyhelyzet miatti sérülését eredményezheti.
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
Important Information 5

AÐVÖRUN
(IS)
Þessi þjónustuhandbók er aðeins fáanleg á ensku.
•Ef að þjónustuveitandi viðskiptamanns þarfnast annas tungumáls en ensku, er það
skylda viðskiptamanns að skaffa tungumálaþjónustu.
•Reynið ekki að afgreiða tækið nema að þessi þjónustuhandbók hefur verið skoðuð
og skilin.
•Brot á sinna þessari aðvörun getur leitt til meiðsla á þjónustuveitanda, stjórnanda
eða sjúklings frá raflosti, vélrænu eða öðrum áhættum.
AVVERTENZA
(IT)
Il presente manuale di manutenzione è disponibile soltanto in lingua inglese.
•Se un addetto alla manutenzione richiede il manuale in una lingua diversa, il cliente
è tenuto a provvedere direttamente alla traduzione.
•Procedere alla manutenzione dell'apparecchiatura solo dopo aver consultato il pre‐
sente manuale ed averne compreso il contenuto.
•Il mancato rispetto della presente avvertenza potrebbe causare lesioni all'addetto al‐
la manutenzione, all'operatore o ai pazienti provocate da scosse elettriche, urti mec‐
canici o altri rischi.
警告
(JA)
このサービスマニュアルには英語版しかありません。
•サービスを担当される業者が英語以外の言語を要求される場合、翻訳作業はその業
者の責任で行うものとさせていただきます。
•このサービスマニュアルを熟読し理解せずに、装置のサービスを行わないでくださ
い。
•この警告に従わない場合、サービスを担当される方、操作員あるいは患者 さんが、
感電や機械的又はその他の危険により負傷する可能性があります。
경고
(KO)
본 서비스 매뉴얼은 영어로만 이용하실 수 있습니다.
•고객의 서비스 제공자가 영어 이외의 언어를 요구할 경우, 번역 서비스를 제공하는
것은 고객의 책임입니다.
•본 서비스 매뉴얼을 참조하여 숙지하지 않은 이상 해당 장비를 수리하려고 시도하지
마십시오.
•본 경고 사항에 유의하지 않으면 전기 쇼크, 기계적 위험, 또는 기타 위험으로 인해 서
비스 제공자, 사용자 또는 환자에게 부상을 입힐 수 있습니다.
BRĪDINĀJUMS
(LV)
Šī apkopes rokasgrāmata ir pieejama tikai angļu valodā.
•Ja klienta apkopes sniedzējam nepieciešama informācija citā valodā, klienta pienā‐
kums ir nodrošināt tulkojumu.
•Neveiciet aprīkojuma apkopi bez apkopes rokasgrāmatas izlasīšanas un sapraša‐
nas.
•Šī brīdinājuma neievērošanas rezultātā var rasties elektriskās strāvas trieciena, me‐
hānisku vai citu faktoru izraisītu traumu risks apkopes sniedzējam, operatoram vai
pacientam.
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
6 Important Information

ĮSPĖJIMAS
(LT)
Šis eksploatavimo vadovas yra tik anglų kalba.
•Jei kliento paslaugų tiekėjas reikalauja vadovo kita kalba – ne anglų, suteikti vertimo
paslaugas privalo klientas.
•Nemėginkite atlikti įrangos techninės priežiūros, jei neperskaitėte ar nesupratote šio
eksploatavimo vadovo.
•Jei nepaisysite šio įspėjimo, galimi paslaugų tiekėjo, operatoriaus ar paciento suža‐
lojimai dėl elektros šoko, mechaninių ar kitų pavojų.
ADVARSEL
(NO)
Denne servicehåndboken finnes bare på engelsk.
•Hvis kundens serviceleverandør har bruk for et annet språk, er det kundens ansvar
å sørge for oversettelse.
•Ikke forsøk å reparere utstyret uten at denne servicehåndboken er lest og forstått.
•Manglende hensyn til denne advarselen kan føre til at serviceleverandøren, oper‐
atøren eller pasienten skades på grunn av elektrisk støt, mekaniske eller andre
farer.
OSTRZEŻENIE
(PL)
Niniejszy podręcznik serwisowy dostępny jest jedynie w języku angielskim.
•Jeśli serwisant klienta wymaga języka innego niż angielski, zapewnienie usługi tłu‐
maczenia jest obowiązkiem klienta.
•Nie próbować serwisować urządzenia bez zapoznania się z niniejszym podręczni‐
kiem serwisowym i zrozumienia go.
•Niezastosowanie się do tego ostrzeżenia może doprowadzić do obrażeń serwisan‐
ta, operatora lub pacjenta w wyniku porażenia prądem elektrycznym, zagrożenia
mechanicznego bądź innego.
ATENÇÃO
(PT-BR)
Este manual de assistência técnica encontra-se disponível unicamente em inglês.
•Se outro serviço de assistência técnica solicitar a tradução deste manual, caberá ao
cliente fornecer os serviços de tradução.
•Não tente reparar o equipamento sem ter consultado e compreendido este manual
de assistência técnica.
•A não observância deste aviso pode ocasionar ferimentos no técnico, operador ou
paciente decorrentes de choques elétricos, mecânicos ou outros.
ATENÇÃO
(PT-PT)
Este manual de assistência técnica só se encontra disponível em inglês.
•Se qualquer outro serviço de assistência técnica solicitar este manual noutro idio‐
ma, é da responsabilidade do cliente fornecer os serviços de tradução.
•Não tente reparar o equipamento sem ter consultado e compreendido este manual
de assistência técnica.
•O não cumprimento deste aviso pode colocar em perigo a segurança do técnico, do
operador ou do paciente devido a choques eléctricos, mecânicos ou outros.
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
Important Information 7

ATENŢIE
(RO)
Acest manual de service este disponibil doar în limba engleză.
•Dacă un furnizor de servicii pentru clienţi necesită o altă limbă decât cea engleză,
este de datoria clientului să furnizeze o traducere.
•Nu încercaţi să reparaţi echipamentul decât ulterior consultării şi înţelegerii acestui
manual de service.
•Ignorarea acestui avertisment ar putea duce la rănirea depanatorului, operatorului
sau pacientului în urma pericolelor de electrocutare, mecanice sau de altă natură.
ОСТОРОЖНО!
(RU)
Данное руководство по техническому обслуживанию представлено только на
английском языке.
•Если сервисному персоналу клиента необходимо руководство не на
английском, а на каком-то другом языке, клиенту следует самостоятельно
обеспечить перевод.
•Перед техническим обслуживанием оборудования обязательно обратитесь к
данному руководству и поймите изложенные в нем сведения.
•Несоблюдение требований данного предупреждения может привести к тому,
что специалист по техобслуживанию, оператор или пациент получит удар
электрическим током, механическую травму или другое повреждение.
UPOZORENJE
(SR)
Ovo servisno uputstvo je dostupno samo na engleskom jeziku.
•Ako klijentov serviser zahteva neki drugi jezik, klijent je dužan da obezbedi prevodi‐
lačke usluge.
•Ne pokušavajte da opravite uređaj ako niste pročitali i razumeli ovo servisno uputst‐
vo.
•Zanemarivanje ovog upozorenja može dovesti do povređivanja servisera, rukovaoca
ili pacijenta usled strujnog udara ili mehaničkih i drugih opasnosti.
UPOZORNENIE
(SK)
Tento návod na obsluhu je k dispozícii len v angličtine.
•Ak zákazníkov poskytovateľ služieb vyžaduje iný jazyk ako angličtinu, poskytnutie
prekladateľských služieb je zodpovednosťou zákazníka.
•Nepokúšajte sa o obsluhu zariadenia, kým si neprečítate návod na obluhu a nepor‐
ozumiete mu.
•Zanedbanie tohto upozornenia môže spôsobiť zranenie poskytovateľa služieb, ob‐
sluhujúcej osoby alebo pacienta elektrickým prúdom, mechanické alebo iné ohroze‐
nie.
ATENCION
(ES)
Este manual de servicio sólo existe en inglés.
•Si el encargado de mantenimiento de un cliente necesita un idioma que no sea el
inglés, el cliente deberá encargarse de la traducción del manual.
•No se deberá dar servicio técnico al equipo, sin haber consultado y comprendido
este manual de servicio.
•La no observancia del presente aviso puede dar lugar a que el proveedor de servi‐
cios, el operador o el paciente sufran lesiones provocadas por causas eléctricas,
mecánicas o de otra naturaleza.
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
8 Important Information

VARNING
(SV)
Den här servicehandboken finns bara tillgänglig på engelska.
•Om en kunds servicetekniker har behov av ett annat språk än engelska, ansvarar
kunden för att tillhandahålla översättningstjänster.
•Försök inte utföra service på utrustningen om du inte har läst och förstår den här
servicehandboken.
•Om du inte tar hänsyn till den här varningen kan det resultera i skador på servicete‐
knikern, operatören eller patienten till följd av elektriska stötar, mekaniska faror eller
andra faror.
OPOZORILO
(SL)
Ta servisni priročnik je na voljo samo v angleškem jeziku.
•Če ponudnik storitve stranke potrebuje priročnik v drugem jeziku, mora stranka za‐
gotoviti prevod.
•Ne poskušajte servisirati opreme, če tega priročnika niste v celoti prebrali in razu‐
meli.
•Če tega opozorila ne upoštevate, se lahko zaradi električnega udara, mehanskih ali
drugih nevarnosti poškoduje ponudnik storitev, operater ali bolnik.
DİKKAT
(TR)
Bu servis kılavuzunun sadece ingilizcesi mevcuttur.
•Eğer müşteri teknisyeni bu kılavuzu ingilizce dışında bir başka lisandan talep
ederse, bunu tercüme ettirmek müşteriye düşer.
•Servis kılavuzunu okuyup anlamadan ekipmanlara müdahale etmeyiniz.
•Bu uyarıya uyulmaması, elektrik, mekanik veya diğer tehlikelerden dolayı teknisyen,
operatör veya hastanın yaralanmasına yol açabilir.
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
Important Information 9

Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
This page left intentionally blank.
10 Important Information

Revision History
Part/Rev Date Reason for Change Pages
5537562-1-1EN rev 1 April. 2015 Initial release of 5537562-1-1EN 204
5537562-1-1EN rev 2 June. 2015 Second release of 5537562-1-1EN 206
5537562-1-1EN rev 3 July. 2015 Third release of 5537562-1-1EN 202
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
Revision History 11

Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
This page left intentionally blank.
12 Revision History

Table of Contents
Chapter 1 GENERAL REQUIREMENTS............................................................................................... 21
1 Objectives & Overview.................................................................................................................. 21
1.1 Object and Scope of this manual..........................................................................................21
1.1.1 Object and Scope........................................................................................................ 21
1.1.2 Quebec........................................................................................................................ 21
1.2 Pre-Installation Process........................................................................................................22
2 Customer Responsibilities.............................................................................................................23
2.1 Responsibilities of the Purchaser/Customer.........................................................................23
2.2 Equipment Classifications.................................................................................................... 24
2.3 Pre-Installation Checklist......................................................................................................25
3 Delivery Requirements.................................................................................................................. 27
3.1 Shipping Information.............................................................................................................27
3.1.1 Product Shipping Information...................................................................................... 27
3.1.2 Detail Of Shipping Information.....................................................................................28
3.1.2.1 Gantry On Shipping Dolly.................................................................................. 28
3.1.2.2 Gantry Air Shipment.......................................................................................... 29
3.1.2.3 System Control Cabinet on pallet....................................................................... 30
3.1.2.4 Omega Shipment................................................................................................31
3.1.2.5 Omega Using Gantry Dollies.............................................................................. 32
3.1.2.6 Other Elements Package....................................................................................32
3.2 Tools and Test Equipment....................................................................................................33
3.3 Door Size Requirements...................................................................................................... 35
3.3.1 Door Height..................................................................................................................35
3.3.2 Door Width...................................................................................................................35
3.4 Route Survey........................................................................................................................36
3.4.1 Step One — Sketch.....................................................................................................36
3.4.2 Step Two — Survey.....................................................................................................36
3.4.3 Step Three — Check................................................................................................... 36
3.5 European Process Order Select...........................................................................................38
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
Table of Contents 13

4 Product Storage and Handling Requirements...............................................................................39
4.1 Product Storage and Handling limits.................................................................................... 39
4.2 Fluoro UPS Shipment Duration............................................................................................ 40
4.2.1 Fluoro UPS (CE and UL)............................................................................................. 40
4.3 Handling instructions............................................................................................................ 40
Chapter 2 EQUIPMENT REQUIREMENTS........................................................................................... 43
1 System Components..................................................................................................................... 43
1.1 Presentation of the 3 Rooms................................................................................................43
1.1.1 Examination room........................................................................................................43
1.1.2 Technical room............................................................................................................ 43
1.1.3 Control room................................................................................................................44
1.2 Description of System...........................................................................................................45
1.2.1 Description of Gantry...................................................................................................45
1.2.2 Description of the Patient table....................................................................................46
1.2.3 User Interfaces............................................................................................................ 47
1.2.4 Description of the X–Ray generator.............................................................................47
1.2.5 Description of the X–Ray head.................................................................................... 47
1.2.6 Description of the Imaging System..............................................................................48
1.2.7 Description of the image monitors suspension............................................................50
1.2.7.1 LCD monitors suspension ..................................................................................50
1.2.7.2 Open suspension ...............................................................................................50
1.2.8 Description of the Ergo monitors suspensions............................................................ 51
1.2.8.1 Suspension System Configuration......................................................................51
1.2.8.2 Monitor Configuration......................................................................................... 52
1.2.8.3 System Cable Information.................................................................................. 53
1.2.9 Description of the DL and associated devices.............................................................53
1.2.10 AW workstation..........................................................................................................54
1.2.11 CENTRICITY CA1000 option.................................................................................... 54
1.2.12 Injectors..................................................................................................................... 54
1.2.13 Fluoro UPS option..................................................................................................... 55
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
14 Table of Contents

1.3 Dimension Drawings.............................................................................................................58
1.4 Basic System Compatibility.................................................................................................. 82
1.4.1 System Compatibility Cross–Reference – Gantry........................................................82
1.4.2 System Compatibilities Cross–Reference – Tables Sub-System................................ 82
1.4.3 System Compatibilities Cross–Reference – Jedi X–Ray Generator............................ 82
1.4.4 System Compatibility Cross–Reference – X–Ray Head.............................................. 82
1.4.5 System Compatibility Cross–Reference – Optima System Imaging And X–Ray
Control............................................................................................................... 83
1.4.6 System Compatibility Cross–Reference – Monitor Support & Suspension..................83
1.4.7 System Compatibilities Cross–Reference – 19” Monitors............................................83
1.5 Optional System Components..............................................................................................84
2 Room Layouts............................................................................................................................... 85
2.1 Room Dimension Requirements...........................................................................................85
2.2 Room Layout Drawings........................................................................................................ 89
2.2.1 Patient Room Layout................................................................................................... 89
2.2.1.1 Room Layout for Optima System (examples of room layouts)........................... 89
2.2.1.2 Room Layout for Optima System (with Ergo suspension).................................. 94
2.2.1.3 Room Layout for Optima System (example with Mobile system 9800).............. 95
2.2.2 Control Room Layout...................................................................................................97
2.2.3 Technical Room Layout...............................................................................................98
2.3 Room Layout Considerations............................................................................................... 99
2.3.1 Radiation Protection.................................................................................................... 99
2.3.2 Service Access............................................................................................................ 99
2.3.3 Clinical Access.............................................................................................................99
2.3.4 Peripheral Equipment.................................................................................................. 99
2.3.5 Emergency Stop........................................................................................................ 100
2.3.6 Patient Environment Equipment................................................................................ 100
2.3.7 Preference Cabinet locations.....................................................................................101
2.3.8 Layout Constraints.....................................................................................................103
3 Room Structural Requirements................................................................................................... 104
3.1 General Policy.................................................................................................................... 104
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
Table of Contents 15

3.2 Floor Requirements............................................................................................................106
3.2.1 Floor requirements when using provided floor anchors.............................................106
3.2.2 Pan Type Floor Construction Requirement............................................................... 106
3.2.3 Hole dimension and preferred location in concrete floor........................................... 107
3.2.4 Water Pipe Requirements..........................................................................................109
3.3 Mounting Requirements..................................................................................................... 113
3.3.1 Floor Loading and Recommended Mounting Methods..............................................113
3.3.2 Positioner and Table Floor Mounting.........................................................................114
3.3.3 LC Positioner and Omega Table Floor Preparation Kits (GEMS supplied)............... 122
3.3.3.1 2285048 - Base Plate Assembly.......................................................................124
3.3.3.2 Assembly and separation select kit.................................................................. 125
3.3.3.2.1 2285051 – Above grade, Floor Anchors without insert............................ 125
3.3.3.2.2 2285646 – Through bolts without insert...................................................125
3.3.3.2.3 2286398 – On grade, Floor anchor..........................................................126
3.3.3.2.4 2285052 – Above grade, Floor anchor with insert................................... 126
3.3.3.2.5 2285053 – Through bolts with insert........................................................127
3.3.3.2.6 2285632 – Floor plate / Base plate assembly..........................................127
3.3.3.3 5570895- Base plate assembly Kit................................................................... 128
3.3.3.4 2285054 – Templates....................................................................................... 128
3.3.3.4.1 2285056 - A/C/N Templates.................................................................... 128
3.3.3.4.2 2186109 – EP Template.......................................................................... 128
3.3.4 Injector Mounting Requirements ...............................................................................130
3.4 Ceiling Requirements......................................................................................................... 131
3.4.1 Rail Mounting.............................................................................................................131
3.4.2 Bolt Specifications..................................................................................................... 131
3.4.2.1 Mavig suspensions........................................................................................... 131
3.4.2.2 Ergo suspension...............................................................................................131
3.4.3 Select Rails................................................................................................................132
3.4.3.1 Rails for Mavig suspension...............................................................................132
3.4.3.2 Rails for Ergo suspension.................................................................................134
3.4.4 Cable Support for Monitor Cables............................................................................. 134
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
16 Table of Contents

3.5 Wall Requirements............................................................................................................. 135
4 Mounting Data, Including Seismic............................................................................................... 136
4.1 Seismic areas.....................................................................................................................136
4.1.1 Floors.........................................................................................................................136
4.1.2 Walls..........................................................................................................................136
4.2 Seismic Calculations.......................................................................................................... 136
Chapter 3 SPECIAL CONSTRUCTION REQUIREMENTS................................................................. 147
1 Radiation Protection.................................................................................................................... 147
2 EMI Consideration.......................................................................................................................148
2.1 General Scope....................................................................................................................148
2.2 Electromagnetic Emission.................................................................................................. 148
2.3 Electromagnetic Immunity.................................................................................................. 148
2.3.1 Electromagnetic Immunity IEC 60601-1-2.................................................................148
2.3.2 Recommended Separation Distances for Portable and Mobile RF
Communications Equipment IEC 60601-1-2................................................... 151
2.4 Limitations Management.................................................................................................... 151
2.5 Use Limitation.....................................................................................................................152
2.6 Installations Requirements & Environment Control............................................................153
Chapter 4 ENVIRONMENTAL REQUIREMENTS................................................................................155
1 Relative Humidity and Temperature............................................................................................155
2 Altitude and Atmospheric Pressure............................................................................................. 157
3 Heat Output................................................................................................................................. 158
3.1 Equipment Heat Output tables........................................................................................... 158
3.2 Fluoro UPS Option............................................................................................................. 159
4 Acoustic Specifications................................................................................................................161
Chapter 5 ELECTRICAL REQUIREMENTS........................................................................................ 163
1 Power Requirements...................................................................................................................163
1.1 System Electrical Characteristics....................................................................................... 163
1.1.1 Core system...............................................................................................................163
1.1.2 Options...................................................................................................................... 164
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
Table of Contents 17

1.2 Power and grounding......................................................................................................... 165
1.2.1 Schematic..................................................................................................................165
1.2.2 Cables to be provided by the installer........................................................................166
1.2.2.1 Core system......................................................................................................166
1.2.2.2 For the Fluoro UPS option................................................................................167
1.2.3 LOTO devices provided by the installer.....................................................................167
1.2.3.1 Core system......................................................................................................167
1.2.4 System interconnections............................................................................................168
1.2.4.1 Emergency power off........................................................................................168
1.2.4.2 X-Ray ON lights................................................................................................168
1.2.4.3 Room door interlock..........................................................................................168
1.2.4.4 System on light................................................................................................. 169
1.2.4.5 Injector..............................................................................................................169
1.3 Other Options..................................................................................................................... 171
1.3.1 For USA only............................................................................................................. 171
1.3.2 Third party monitors on suspension...........................................................................171
2 System Cable Information........................................................................................................... 172
2.1 Physical Runs.....................................................................................................................172
2.1.1 Physical Run Synoptic...............................................................................................172
2.1.2 System Core Matrix................................................................................................... 173
2.1.3 PHYSICAL RUN - SYSTEM CORE DETAIL............................................................. 180
2.2 MIS (Master Interconnect System).....................................................................................185
2.3 Cable Channeling...............................................................................................................186
2.3.1 General......................................................................................................................186
2.3.2 Conduit...................................................................................................................... 186
2.3.3 Electrical Ducts..........................................................................................................186
3 Lighting Specifications.................................................................................................................190
3.1 Room Light Distribution...................................................................................................... 190
3.1.1 Requirements for lighting...........................................................................................190
3.1.2 Lighting Relay ...........................................................................................................190
3.1.3 Room Lighting for System......................................................................................... 191
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
18 Table of Contents

3.1.4 Windows and curtains ...............................................................................................191
Chapter 6 COMMUNICATION REQUIREMENTS............................................................................... 193
1 Network Requirements................................................................................................................193
1.1 Insite/Network Connection..................................................................................................193
2 IP Addressing Process................................................................................................................ 194
Chapter 7 APPENDIX.......................................................................................................................... 195
1 PIST0021 - US Fluoro UPS and PDB connection.......................................................................195
1.3.1 Connection of the Power Distribution Box.......................................................................196
1.3.2 Connection of the Fluoro UPS Option Cables.................................................................197
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
Table of Contents 19

Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
This page left intentionally blank.
20 Table of Contents