GE 97651 User manual

Digital FM Transmitter
97651

2
Instructions
1. Connect the 3.5mm audio input plug
from the FM Transmitter to your
portable DVD, CD, MP3 player or other
portable device using the head phone
jack.
2. Plug the 12V DC plug into the cigarette
lighter socket in your vehicle.
3. The unit will come on and the backlight
will light up.
4. Turn on your FM radio. Select a station
that is not being used in your area.
5. Press the + or - on the FM Transmitter
to adjust the FM frequency to the station previously selected on the radio.
There is about a second delay before the signal is locked in.
6. Turn on your music or video player and set the volume to the middle of the
volume dial.
7. Increase the volume on your radio until your music or video is at the
desired level.

3
To Save Stations into Memory
1. Tune the FM Transmitter to the desired station.
2. Press and hold the M button for 2 seconds.
3. M1 will flash. M1 is now selected.
4. To choose between M1, M2, M3 and M4 press the + or - button.
5. When you select the correct memory preset, press M again to save
the station.
How to Improve the Transmitted Sound
1. Make sure the FM station you select is the quietest one on the FM dial in
your area. For example, manually tune through all stations on your FM
dial and note the ones that pick up the least amount of FM radio stations.
It is best to record 3 or 4 stations and program all of them into your FM
transmitter.
2. Make sure the input to your FM Transmitter is not being overloaded. This
can cause dipping and distortion through your FM stereo. If you suspect
this simply turn down your CD/DVD, MP3 player or computer.

4
To Rotate Memory Presets
1. Press the Mbutton once to show the next memory preset.
2. Press the Mbutton again to select the next memory preset.
3. Pressing the Mbutton again and again will rotate thru all memory presets.

5
One Year Limited Warranty
Jasco Products Company warrants this product to be free from manufac-
turing defects for a period of one year from the original date of consumer
purchase. This warranty is limited to the repair or replacement of this product
only and does not extend to consequential or incidental damage to other
products that may be used with this unit. THIS WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES EXPRESS OR IMPLIED. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR PERMIT THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. This warranty gives you
specific rights, and you may also have other rights which vary from state to
state. If unit should prove defective within the warranty period, return prepaid
with dated proof of purchase to: Jasco Products Company, 10 E. Memorial
Rd., Oklahoma City, OK 73114.

6
FCC Regulations
Notice: Federal Communications Commission (FCC) requirements, Part 15
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes of modifications not expressly approved by the grantee of this
device could void the users authority to operate the equipment. This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

7
Instrucciones
1. Conecte la entrada de audio de
3.5mm del Transmisor FM a la salida
para audífonos de su reproductor por-
tátil de DVD/CD, MP3 o de cualquier
otro reproductor portátil.
2. Conecte el conector de CC de 12V al
enchufe del encendedor de cigarrillos
de su auto.
3. La unidad se encenderá y la luz poste-
rior se iluminará.
4. Encienda su radio FM. Escoja una
estación disponible en su área.
5. Presione + ó - para seleccionar la
frecuencia FM de modo que coincida con la estación que ha seleccionado
en la radio. Hay acerca de una segunda demora antes la señal es
encerrada.
6. Encienda su reproductor de música o video y ajuste el volumen a
la mitad.
7. Suba el volumen de su radio hasta que alcance el volumen deseado.

8
Para Guardar Las Estaciones En La Memoria
1. Sintonice el Transmisor FM en la estación
que desea.
2. Presione y mantenga el botón M por 2
segundos.
3. El botón M1 empezará a parpadear. M1 ya estará configurado.
4. Para escoger entre M1, M2, M3 y M4, presione el botón + ó -.
5. Cuando sintonice la memoria predefinida que desee, presione M nueva-
mente para guardar la estación.
Modos De Mejorar La Señal Del Sonido
1. Asegúrese de que la estación FM que haya escogido, sea la más limpia
de las radios en su área. Por ejemplo, sintonice manualmente todas las
estaciones de radio y apunte las sintonías que captan la menor cantidad
de ruido. Lo mejor es grabar 3 ó 4 estaciones y programarlas todas en el
transmisor FM.
2. Asegúrese que la entrada al Transmisor FM de GE no se sobrecargue.
Esto puede ocasionar una oscilación y distorsión en su radio FM estéreo.
Si piensa que esto está ocurriendo, apague su computadora o su repro-
ductor de CD/DVD o MP3.

9
Para Seleccionar los Pre-posicionamientos de Memoria
1. Presione el botón M una sola vez para mostrar el siguiente pre-posiciona-
miento de memoria.
2. Presione el botón M nuevamente para seleccionar el siguiente pre-posicio-
namiento de memoria.
3. Presionando el botón M subsecuentemente hará pasar por todos los pre-
posicionamientos de memoria.

10
Garantia Limitada De Un Año
Jasco Products Company garantiza este producto por un periodo de un año
desde la fecha de la compra original, como libre de defectos de fabricación.
Esta garantía está limitada a la reparación o reemplazo de este producto y
no se extiende a daños consecuentes o incidentales en otros productos que
puedan ser usados con esta unidad. Esta garantía es en vez de cualquier
otra expresa o implícita. Algunos estados no permite limitacíones al tiempo
de limitada o permite el exclusión o limitaciones del daños incidental o con-
siguiente, así el limitacíon del arriba no aplicarse. Esta limitada darse justicia,
y talvez tiene otro justicias que cambia del estado a estado. Si la unidad
resulta defectuosa durante el periodo de garantía, devolverla prepagada a:
Jasco Products Company, 10 E. Memorial Rd., Oklahoma City, OK. 73114.