GE 99001 User manual

Portable Stereo Transmitter
User Manual
Model 99001
Class 2
CAUTION
This product does not have a user-serviceable battery. Please do NOT attempt
to change the battery yourself. The battery used in this device may present a
risk of fire or chemical burn if misused. Please avoid extreme temperatures.
Do not use this product on an airplane in transit as this could disrupt
communication.
Vers. 1 8/06

2
FCC Information: The Federal Communication Commission Radio
Frequency Interference Statement includes the following paragraph:
This equipment has been tested and found to comply with the limits for a
Class B Digital Device, pursuant to part 15 of the FCC Rues. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment uses, generates and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment Off and On, the user is encouraged to try to correct the
interference by one or more of the following measures
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to
which he receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
IMPORTANT NOTE
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements
and void the user’s authority to operate the device.
CLASS 2 OPERATION
Class 2 Bluetooth®devices provide a maximum range of approximately 10
meters or 30 feet. Class 1 devices have a maximum range of 100 meters
or 300 feet. Since Bluetooth®connectivity is bi-directional, the maximum
range between two devices depends upon both units’ operational class.
As an example, when one Class 1 device is paired with one Class 2 device,
the maximum range between them will be limited to 10 meters or 30 feet.
Both devices would have to be Class 1 in order to achieve the maximum 100
meter range.

3
Using the Product
Thank you or choosing the GE 99001 Portable Stereo
Transmitter. This device supports the A2DP Bluetooth®
profile which provides users with the ability to stream
high quality audio via Bluetooth®wireless technology
from any stereo device that has a 3.5mm headphone
jack or line output.
Charging
• Charge the unit for a minimum of 12 hours before
first use. Use the enclosed USB charging cable or
the AC Adapter to fully charge the transmitter.
• The red LED indicator will stay on constantly when
charging.
• The transmitter’s red LED charging indicator will shut
off automatically when the battery is fully charged.
• The red LED indicator will start to flash when the
power is low. Charge the transmitter when you see
the LED low power indicator flashing.
Connecting the transmitter to an audio source
1. Use the 3.5mm stereo patch cable that came with
the transmitter to connect from the line input of the
transmitter to the headphone or line output jack on
your portable audio device.
2. Turn on the audio device as you normally would
to play
3. Slide the power switch located on the top of the
GE 99001 transmitter to the on position.

4
Pairing the transmitter to a Bluetooth®enabled
device such as a pair of stereo headphones
See the owner’s manual of the reception device for
instructions. Most Bluetooth®enabled headphones will
automatically pair with the GE 99001. Some devices may
require a PIN code during the pairing process; enter 0000
if needed.
Note: It may take up to 2 minutes for the GE 99001
transmitter and your Bluetooth®audio receiver to pair.
While the GE 99001 and your audio receiver are pairing
you will see the Blue LED on the GE 99001 flashing quickly.
Once your GE 99001 is paired you will see a slow and
steady blinking.
Turning the Transmitter OFF to Conserve
Battery Power
If you don’t want to use the GE 99001 transmitter, turn off
power by moving the power switch to off. It can easily be
paired back with your devices the next time you choose to
use it.
Troubleshooting
1. How do I know when the battery on the transmitter is
running low?
The battery power is almost exhausted when one or more
of the following scenarios happen:
a. You can constantly hear breaks on the audio link about
every 30 seconds, or
b. You cannot pair any Bluetooth®receivers to the
transmitter after several tries.

5
2. Why does the transmitter turn off automatically?
If you turn on the transmitter but it cannot find any device
to pair with after 3 minutes, it will turn off automatically to
conserve battery life.
Specifications
Standard Bluetooth®1.2 compliant
Power Class Class 2
Frequency Band 2.402~2.480 GHZ unlicensed ISM band
Profile Supported A2DP
Audio Format SBC
Rx Sensitivity < 0.1% BER at -80 dBm
RF Output Power -6dBm to 4 dBm
Sampling Rate 48 KHz
SNR >85dB
Antenna embedded antenna
Working Distance Up to 30 feet in open space*
Power Consumption Music Streaming 75 mA (Typical)
Power Supply 550mAH Lithium Ion Battery
Operating Temperature -10 °C ~ +55 °C
Dimensions 47.54mm (L) × 47.54mm (W) × 29.52mm (H)
Weight About 20 grams
*Note: The maximum operating range depends on the paired phone model,
battery power, and environmental factors.

6
DISCLAIMER
While every effort has been made to ensure that the information in this
manual is accurate and complete, no liability will be accepted for any
errors and/or omissions made. The manufacturer reserves the right to
make changes and improvements to the specifications and features of the
hardware and firmware of the products described in this document without
prior notice. Reproduction, transfer, distribution or storage of part or all
of the contents in this document in any form is prohibited without prior
permission of the manufacturer. All trademarks acknowledged.
Limited One-Year Warranty
Jasco Products Company warrants this product to be free from
manufacturing defects for a period of one year from the original date
of purchase. This warranty is limited to the repair or replacement of this
product only and does not extend to consequential or incidental damage to
other products that may be used with this unit. This warranty is in lieu of all
other warranties expressed or implied. Some states do not allow limitations
on how long an implied warranty lasts or permit the exclusion or limitation
of incidental or consequential damages, so the above limitations may not
apply to you. This warranty gives you specific rights, and you may also
have other rights which vary from state to state. If this unit should prove
defective within the warranty period, return prepaid with dated proof of
purchase to: Jasco Products Company, 10 E. Memorial Road,
Oklahoma City, OK 73114
The Bluetooth®word mark and logos are owned by Bluetooth®SIG, Inc. and
any use of such marks by JASCO Inc. is under license. Other trademarks and
trade names are those of their respective owners.
©2006 JASCO Products
Made in China