Gear Light S100 User manual

S100 LED POCKET FLASHLIGHT
Operation Guide
TROUBLESHOOTING
If the flashlight does not turn on or works intermittently:
Replace the batteries.
Make sure the tail cap is twisted on tightly and batteries are inserted correctly.
If the flashlight flickers:
Make sure the tail cap is twisted on tightly.
If the light appears dim or faded:
Irvine, California | USA | www.GearLight.com
WARRANTY AND LIMITATION OF LIABILITY
MAINTENANCE
Inspect the flashlight monthly and carefully remove any damaged batteries and clean
any corrosion. If the flashlight is used less than once a month, remove the batteries
between uses. Lubricate all threads and rubber O-rings with petroleum jelly twice
yearly.
Limited One-Year Warranty
GearLight warrants this product for one year from the date of purchase
against any defects in material or workmanship. This warranty does not cover
normal wear and tear, nor damage resulting from misuse or neglect. We will,
at our discretion, repair, replace, or refund the purchase price of this product
should we determine it to be defective.
Limitation Of Liability
Liability limited to the purchase price of this product. GearLight shall not be
liable for any incidental or consequential damages or any implied warranty on
this product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion
may not apply to you.
If the problem persists, possible LED Failure. Contact GearLight for a replacement.
Replace the batteries.
2x GearLight S100 LED Pocket Flashlights
1x Operation Guide
Package Contents:
FOR YOUR SAFETY, READ BEFORE OPERATING
V2

WARNING:To avoid eye injury, do not stare directly into the beam or shine the
flashlight beam directly into anyone’s eyes.
This product is not designed, intended, or recommended for children.
WARNING: Always follow the battery manufacturer’s instructions as to the
proper usage, handling, storage, and disposal of batteries. Use only batteries
from a reputable manufacturer. Do not mix dierent brands or types of batteries
in the same flashlight. Replace all batteries at the same time. Failure to follow
safety instructions may result in personal injury and damage to property.
AAA Battery Installation
1. Unfasten the tail cap.
2. Insert 2 AAA batteries with the positive (+) end first.
Always install batteries with the positive (+) end facing the LED end and the
negative (-) end facing the tail cap end of the flashlight.
3. Refasten the tail cap.
On/O
To turn the flashlight on, press down firmly on the red power button located
on the tail of the flashlight until you hear a click.
To turn the flashlight o, press down firmly again until you hear a click.
GETTING STARTED
OPERATION
TAIL CAP
LED
POCKET CLIP
POWER BUTTON
NOT HAPPY? NEED TO RETURN?
Avoid the hassle of shipping the product back. Contact us at
[email protected] within 1 year of the purchase date for a free
replacement or full refund.
We respond to all inquiries within 24 hours.