GEIGER Remote AIR GF2900 User manual
1
www.geiger.de EN
EN
DE Original-Montage- und
Betriebsanleitung
Original assembly and
operating instructions
Notice originale de montage
et d’utilisation
Instrucciones originales de
instalación y funcionamiento
Istruzioni originali di installazione
e funzionamento
EN
FR
ES
IT
Handheld transmitter
Remote AIR GF2900
Handsender
Handheld transmitters
Télécommandes
2Gerhard Geiger GmbH & Co. KG | 100W1636 0818V000en
EN
EN
1. General information
Dear customer,
By purchasing a GEIGER Remote AIR handheld transmitter you have decided on a quality
product from GEIGER.
Thank you very much for your decision and the condence placed in us.
2. Guarantee
In the case of incorrect installation contrary to the operating instructions and/or constructional
modication, the legal and contractual guarantee for property damage and product liability
lapses.
3. Handheld transmitter specic safety information
Please observe following instructions in order to avoid damage to this product:
fAvoid impacts.
fDo not drop the device.
fDo not immerse in water or any liquid. Ensure protection against splashing water.
fNever use cleaning agents or abrasive solvents. Clean the surface of the transmitter
with a damp cloth.
4. Scope of delivery
• Handheld transmitter
• Battery type button cell CR2032 (not installed)
• Quick start guide
5. Remote AIR transmitter / Assignment of keys
No. Function
1Channel and sun automatic display light (yellow)
Channel 1: 1 x short flash
Channel 2: 2 x short flash
Channel 3: 3 x short flash
Sun automatic: 1 x long flash
2STOP key
3Channel selection key RIGHT
4UP key
5Channel selection key LEFT
6DOWN key
6. Insert/remove/replace battery
Remove the cover on the back of the handheld transmitter with
a coin (turn counter clockwise) and insert the supplied battery or
a new one. To close, put the cover back with a coin in clockwise
direction.
If the display doesn‘t light up if actuating one of the control keys, the batteries need to be
replaced. Please use the same type of battery (CR2032).
7. Learning the handheld transmitter with a GEIGER motor
Please refer to the operating instructions of the motor for the learning of the handheld trans-
mitter with the motor and the setting of the end stops.
I The handheld transmitter Remote AIR cannot be connected with the
Loxone Smart Home control.
3
www.geiger.de EN
EN
8. Switch the automatic sun function on and off
To switch the sun automatic function on and off, please refer to the operating instructions of the
weather station AIR.
9. Technical data
Transmitting frequency 868 MHz
Temperature range between -0°C and +55°C
Dimensions 106 x 34 x 10 mm
Protection class IP 20
Power supply 3V type CR2032
Subject to technical modifications
10. Declaration of conformity
The transmitter complies with the relevant technical regulations enacted by the European Union.
It bears the CE mark and is authorised for use in all EU member states and in Switzerland
without any need of prior registration.
Current declarations of conformity are available under www.geiger.de
11. Disposal
Recycling of packaging materials
Packaging materials are raw materials and, therefore, recyclable. In the interest of environmental
protection, please contact your local government’s recycling or solid waste management depart-
ment to learn more about the services it provides.
Waste disposal of electric and electronic equipment
According to the EC directives, all waste electrical and electronic equipment should be
disposed of and collected separately.
4Gerhard Geiger GmbH & Co. KG | 100W1636 0818V000en
EN
EN
For technical questions, please call our service team at: +49 (0) 7142 938-333.
They will be happy to assist you.
Gerhard Geiger GmbH & Co. KG
Schleifmühle 6
D-74321 Bietigheim-Bissingen
Telephone: +49 (0) 7142 938-0
Telefax: +49 (0) 7142 938-230
E-Mail: info@geiger.de
Internet: www.geiger.de
Table of contents
Other GEIGER Transmitter manuals
