Genie AWP Super Series User manual

Service Manual
Serial Number Range
AWP Super Series
from 3896-101
to 3801-
99999
from AWP02-
21194
to AWP16G-
87799
from AWPG-
87800
IWP Super Series
from 4096-101
to 4001-
4413
from IWP02-
4205
to IWP16G-
11999
from IWPG-12000
Part No. 38139
Rev B11
September 2016

Service Manual September 2016
Introduction
ii AWP Super Series • IWP Super Series Part No. 38139
Intr od ucti on Intr od ucti on
Importa nt Inform ati on
Important
Read, understand and obey the safety rules and
operating instructions in the appropriate Operator's
Manual on your machine before attempting any
maintenance procedure.
This manual provides detailed scheduled
maintenance information for the machine owner
and user. It also provides troubleshooting and
repair procedures for qualified service
professionals.
Basic mechanical, hydraulic and electrical skills are
required to perform most procedures. However,
several procedures require specialized skills, tools,
lifting equipment and a suitable workshop. In these
instances, we strongly recommend that
maintenance and repair be performed at an
authorized Genie dealer service center.
Compliance
Machine Classification
Group A/Type 1 as defined by ISO 16368
Machine Design Life
Unrestricted with proper operation, inspection and
scheduled maintenance.
Technical Publications
Genie has endeavored to deliver the highest
degree of accuracy possible. However, continuous
improvement of our products is a Genie policy.
Therefore, product specifications are subject to
change without notice.
Readers are encouraged to notify Genie of errors
and send in suggestions for improvement. All
communications will be carefully considered for
future printings of this and all other manuals.
Contact Us:
Internet: www.genielift.com
E-mail: [e-mail]
Find a Manual for this Model
Go to http://www.genielift.com
Use the links to locate Service Manuals,
Maintenance Manuals, Service and Repair
Manuals, Parts Manuals and Operator's Manuals.
Copyright © 1996 by Terex Corporation
38139 Rev B, December 2001
First Edition, Second Printing
'Genie', 'AWP' and 'IWP' are registered trademarks of Terex
South Dakota. in the U.S.A. and many other countries. “Super
Series” is a trademark of Terex South Dakota.

September 2016 Service Manual
Introduction
Part No. 38139 AWP Super Series • IWP Super Series iii
Revision History
Revision History
Revision Date Section Procedure / Page / Description
B8 5/2015 Maintenance Removed C-6
B9 8/2016 Repair 5-4
B10 9/2016 Introduction Serial Number Legend
B11 9/2016 Schematics Page 166
Reference Examples:
Section – Maintenance, B-3
Electronic Version
Click on any content or procedure in the Table of Contents to view
the update.
Section – Repair Procedure, 4-2
Section – Fault Codes, All charts
Section – Schematics, Legends and schematics

Service Manual September 2016
Introduction
iv AWP Super Series • IWP Super Series Part No. 38139
Revision History (continued)
Revision Date Section Procedure / Page / Description
Reference Examples:
Section – Maintenance, B-3
Electronic Version
Click on any content or procedure in the Table of Contents to view
the update.
Section – Repair Procedure, 4-2
Section – Fault Codes, All charts
Section – Schematics, Legends and schematics

September 2016 Service Manual
Introduction
Part No. 38139 AWP Super Series • IWP Super Series v
Serial Number Legend
To August 31,
2016
1 Model
2 Model year
3 Facility code
1 Sequence number
2 Serial number (stamped on chassis)
3 Serial label
From September 1, 2016
1 Model
2 Facility code
3 Sequence number
1 Serial number (stamped on chassis)
2 Serial label

Service Manual September 2016
Safety Rules
vi AWP Super Series • IWP Super Series Part No. 38139
Section 1 Safet y R ules Gener al Safet y R ules
Danger
Failure to obey the instructions and safety rules in
this manual and the appropriate Operator's Manual
on your machine will result in death or serious
injury.
Many of the hazards identified in the operator's
manual are also safety hazards when maintenance
and repair procedures are performed.
Do Not Perform Maintenance
Unless:
You are trained and qualified to perform
maintenance on this machine.
You read, understand and obey:
•manufacturer's instructions and safety rules
•employer's safety rules and worksite
regulations
•applicable governmental regulations
You have the appropriate tools, lifting
equipment and a suitable workshop.

September 2016 Service Manual
Safety Rules
Part No. 38139 AWP Super Series • IWP Super Series vii
Personal Safety
Any person working on or around a machine must
be aware of all known safety hazards. Personal
safety and the continued safe operation of the
machine should be your top priority.
Read each procedure thoroughly. This
manual and the decals on the machine,
use signal words to identify the following:
Safety alert symbol
—used to aler
t
personnel to potential personal
injury hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
Indicates a imminently hazardous
situation which, if not avoided, will
result in death or serious injury.
Indicates
a potentially hazardous
situation which, if not avoided,
could result in death or serious
injury.
Indicates a potentially hazardous
situation which, if not avoided,
may cause minor or moderate
injury.
Indicates a potentially hazardous
situation which
, if not avoided,
may result in property damage.
Be sure to wear protective eye wear and
other protective clothing if the situation
warrants it.
Be aware of potential crushing hazards
such as moving parts, free swinging or
unsecured components when
lifting or
placing loads. Always wear approved
steel
-toed shoes.
Workplace Safety
Any person working on or around a machine must
be aware of all known safety hazards. Personal
safety and the continued safe operation of the
machine should be your top priority.
Be sure to keep sparks, flames and
lighted tobacco away from flammable and
combustible materials like battery gases
and engine fuels. Always have an
approved fire extinguisher within easy
reach.
Be sure that all tools and working areas
are prop
erly maintained and ready for
use. Keep work surfaces clean and free of
debris that could get into machine
components and cause damage.
Be sure any forklift, overhead crane or
other lifting or supporting device is fully
capable of supporting and stabili
zing the
weight to be lifted. Use only chains or
straps that are in good condition and of
ample capacity.
Be sure that fasteners intended for one
time use (i.e., cotter pins and self
-locking
nuts) are not reused. These components
may fail if they are us
ed a second time.
Be sure to properly dispose of old oil or
other fluids. Use an approved container.
Please be environmentally safe.
Be sure that your workshop or work area
is properly ventilated and well lit.

September 2016
Table of Contents
viii AWP Super Series • IWP Super Series Part No. 38139
Introduction Introduction .......................................................................................................... ii
Important Information ..............................................................................................ii
Find a Manual for this Model...................................................................................ii
Revision History .....................................................................................................iii
Serial Number Legend ........................................................................................... v
Section 1 Safety Rules......................................................................................................... vi
General Safety Rules.............................................................................................vi
Section 2Specifications..................................................................................................... 17
AWP-15S, 20S and 25S Specifications ............................................................... 17
AWP30S, 36S and 40S Specifications ................................................................ 18
AWP Narrow Base Specifications........................................................................ 19
AWP Rough Terrain Base Specifications ............................................................ 20
IWP Specifications ............................................................................................... 21
AWP/IWP Performance and Hydraulic Specifications ......................................... 22
Hydraulic Hose and Fitting Torque Specifications ............................................... 23
Torque Procedure ................................................................................................ 24
SAE and Metric Fasteners Torque Charts ........................................................... 26

September 2016
Table of Contents
Part No. 38139 AWP Super Series • IWP Super Series ix
Section 3 Scheduled Maintenance Procedures ...............................................................27
Introduction...........................................................................................................27
Pre-Delivery Preparation Report ..........................................................................31
Maintenance Inspection Report............................................................................33
Checklist A Procedures .....................................................................................35
A-1 Inspect the Manuals and Decals....................................................................35
A-2 Perform Pre-operation Inspection..................................................................36
A-3 Perform Function Tests .................................................................................36
A-4 Inspect for Damage and Loose or Missing Parts...........................................37
A-5 Check for Hydraulic Leaks.............................................................................38
A-6 Check the Hydraulic Oil Level........................................................................38
A-7 Test the Base Operation - IWPS Models.......................................................39
A-8 Test the Auxiliary Platform Lowering Operation ............................................39
A-9 Test the Manual Platform Lowering Operation ..............................................40
A-10 Inspect the Columns for Damage ................................................................40
A-11 Check the Sequencing Cables ....................................................................41
A-12 Check the Interlock System for Proper Operation .......................................41
A-13 Test the Power and Function Controls ........................................................43
A-14 Inspect the Lifting Chains and Idler Wheels ................................................43
A-15 Inspect the Breather Cap.............................................................................44
A-16 Check the Tire Pressure -
AWPS Models with Rough Terrain Base Option ..........................................45
A-17 Check the Air Supply Lubricator Oil Level - Air Models...............................45
A-18 Check the Air Supply Lubricator Drip Rate - Air Models .............................46
A-19 Check the Air Filter/Regulator Canister - Air Models...................................46

September 2016
Table of Contents
xAWP Super Series • IWP Super Series Part No. 38139
Checklist B Procedures..................................................................................... 47
B-1 Inspect the Battery ........................................................................................ 47
B-2 Inspect the Electrical Wiring .......................................................................... 47
B-3 Inspect All Welds........................................................................................... 48
B-4 Test the Tilt-back Operation (if equipped) ..................................................... 48
B-5 Check the Lifting Chain Adjustment .............................................................. 50
B-6 Clean and Lubricate the Columns ................................................................. 51
B-7 Test the Lifting Capacity................................................................................ 51
B-8 Adjust the Sequencing Cables ...................................................................... 52
B-9 Inspect for Proper Outrigger Length - AWPS Models ................................... 53
B-10 Inspect and Lubricate the Outrigger Leveling Jack Footpads -
AWPS Models ............................................................................................. 55
B-11 Test the Level Sensing Operation - IWPS Models...................................... 55
B-12 Check the Chain Adjustment, IWP-20S Models with Outreach Option....... 56
Checklist C Procedures..................................................................................... 57
C-1 Inspect and Lubricate the Casters and Wheels ............................................ 57
C-2 Inspect the Mast Assembly for Wear ............................................................ 57
C-3 Inspect and Lubricate the Lifting Chains....................................................... 59
C-4 Replace the Hydraulic Oil.............................................................................. 59
C-5 Replace the Auxiliary Platform Lowering Batteries ....................................... 61

September 2016
Table of Contents
Part No. 38139 AWP Super Series • IWP Super Series xi
Section 4 Repair Procedures .............................................................................................63
Introduction...........................................................................................................63
Base Assembly ...................................................................................................65
1-1 Interlocks ........................................................................................................65
1-2 Base Components IWPS Models...................................................................66
1-3 Foot Pump Manifold Components - IWPS Models (to SN IWP09-8269).......70
1-4 Foot Pump Manifold Components -
IWPS Models (from SN IWP09-8270) ..........................................................71
1-5 Power Wheel Assist Manifold Components -
IWPS Models (to SN 4097-990) ...................................................................72
1-6 Power Wheel Assist Manifold Components -
IWPS Models (from SN 4097-997 to 4099-2532).........................................73
1-7 Power Wheel Assist Manifold Components -
IWPS Models (from SN 4099-2533) .............................................................74
Ground Controls.................................................................................................75
2-1 How to Test the Transformer - AC Models ....................................................75
2-2 How to Test the AC Contactor - AC Models ..................................................76
Hydraulic Power Unit .........................................................................................77
3-1 Hydraulic Power Unit - AC Models
(to SN AWP03-27389 and IWP03-5150)......................................................77
3-2 Hydraulic Power Unit - AC Models
(from SN AWP03-27390 to AWP08-60145) .................................................78
3-3 Hydraulic Power Unit - DC Models
(to SN AWP03-27401 and IWP03-5122)......................................................80
3-4 Hydraulic Power Unit Components - Air Powered Models
(to SN AWP04-27778)..................................................................................82
3-5 Hydraulic Power Unit......................................................................................85
3-6 Hydraulic Pump..............................................................................................87
3-7 Valve Adjustment ...........................................................................................87
3-8 How to Test the Motor Start Solenoid - DC Models .......................................88

September 2016
Table of Contents
xii AWP Super Series • IWP Super Series Part No. 38139
Power Pack ......................................................................................................... 89
4-1 Power Pack.................................................................................................... 89
Mast Components .............................................................................................. 90
Mast Components ................................................................................................ 90
5-1 Lift Cylinder .................................................................................................... 91
5-2 Mast Assembly .............................................................................................. 92
5-3 Glide Pads ..................................................................................................... 97
5-4 Lifting Chains ................................................................................................. 98
Tilt-back Frame, AWP-36S and 40S Models .................................................. 101
6-1 Tilt-back Frame ............................................................................................ 101
Platform............................................................................................................. 103
7-1 Platforms...................................................................................................... 103
7-2 Platform Control Box.................................................................................... 104
7-3 Platform Outreach Chain ............................................................................. 105

September 2016
Table of Contents
Part No. 38139 AWP Super Series • IWP Super Series xiii
Section 5 Schematics........................................................................................................107
Introduction.........................................................................................................107
Electrical Component and Wire Color Legends .................................................108
Electrical Symbol Legend ...................................................................................110
Hydraulic Symbols Legend.................................................................................111
Electrical Schematics - AWP Models .............................................................113
Electrical Schematic - AWP Super Series DC Models
(from SN 3896-101 to 3896-300)................................................................114
Electrical Schematic - AWP Super Series DC Models
(from SN 3896-301 to 3896-430)................................................................115
Electrical Schematic - AWP Super Series DC Models
( from SN 3896-431 to AWP07-54898) ......................................................118
Electrical Schematic - AWP Super Series DC Models with Standard Base
(from SN AWP07-54899)............................................................................119
Electrical Schematic - AWP Super Series DC Models with Narrow Base
(from SN AWP07-54899)............................................................................122
Electrical Schematic - AWP Super Series DC CE Models
(from SN 3896-432 to AWP07-54898) .......................................................123
Electrical Schematic - AWP Super Series DC CE Models with Standard Base
(from SN AWP07-54899)............................................................................126
Electrical Schematic - AWP Super Series DC CE Models with Narrow Base
(from SN AWP07-54899)............................................................................127
Electrical Schematic - AWP Super Series DC TUV Models
(from SN 3896-431) ....................................................................................130

September 2016
Table of Contents
xiv AWP Super Series • IWP Super Series Part No. 38139
Electrical Schematic - AWP Super Series AC Models
(from SN 3896-103 to 3896-303) ............................................................... 131
Electrical Schematic - AWP Super Series AC Models
(from SN 3896-304 to 3896-450) ............................................................... 134
Electrical Schematic - AWP Super Series AC Models
(from SN 3896-451 to AWP07-54898)....................................................... 135
Electrical Schematic - AWP Super Series AC Models with Standard Base
(from SN AWP07-54899 to AWP07-57594)............................................... 138
Electrical Schematic - AWP Super Series AC Models with Narrow Base
(from SN AWP07-54899 to AWP-57594)................................................... 139
Electrical Schematic - AWP Super Series AC Models with Standard Base
(from SN AWP07-57595) ........................................................................... 142
Electrical Schematic - AWP Super Series AC Models with Narrow Base
(from SN AWP07-57595) ........................................................................... 143
Electrical Schematic - AWP Super Series AC CE Models
(from SN 3896-451 to AWP07-54898)....................................................... 146
Electrical Schematic - AWP Super Series AC CE Models with Standard Base
(from SN AWP07-54899 to AWP07-57594)............................................... 147
Electrical Schematic - AWP Super Series AC CE Models with Narrow Base
(from SN AWP07-54899 to AWP07-57594)............................................... 150
Electrical Schematic - AWP Super Series AC CE Models with Standard Base
(from SN AWP-57595) ............................................................................... 151
Electrical Schematic - AWP Super Series AC CE Models with Narrow Base
(from SN AWP07-57595) ........................................................................... 154
Electrical Schematic - AWP Super Series AC TUV Models
(from SN 3896-461) ................................................................................... 155

September 2016
Table of Contents
Part No. 38139 AWP Super Series • IWP Super Series xv
Electrical Schematics - IWP Models ...............................................................157
Electrical Schematic - IWP Super Series DC Models
(from SN 4096-101 to 4096-287)................................................................158
Electrical Schematic - IWP Super Series DC Models
(from SN 4096-288 to 4096-341)................................................................159
Electrical Schematic - IWP Super Series DC Models
(from SN 4096-342 to IWP07-7065)...........................................................162
Electrical Schematic - IWP Super Series DC Models
(from SN IWP07-7066) to IWP15-9621......................................................163
Electrical Schematic - IWP Super Series DC Models
(from SN 4096-342 to IWP07-7065)...........................................................166
Electrical Schematic - IWP Super Series DC Models with Power Assist...........167
Electrical Schematic - IWP Super Series DC Models with Power Assist
(Directional Valve Coils Powering Function Manifold)................................170
Electrical Schematic - IWP Super Series DC TUV Models ................................171
Electrical Schematic - IWP Super Series DC TUV Models with Outreach.........174
Electrical Schematic - IWP Super Series DC TUV
Models with Power Assist...........................................................................175
Electrical Schematic - IWP Super Series DC TUV
Models with Power Assist and Outreach....................................................178
Electrical Schematic - IWP Super Series DC TUV Models with Power Assist
(Directional Valve Coils Powering Function Manifold)................................179

September 2016
Table of Contents
xvi AWP Super Series • IWP Super Series Part No. 38139
Electrical Schematic - IWP Super Series AC Models
(from SN 4096-105 to 4096-285) ............................................................... 182
Electrical Schematic - IWP Super Series AC Models
(from SN 4096-286 to 4096-355) ............................................................... 183
Electrical Schematic - IWP Super Series AC Models
(from SN 4096-356 to IWP07-7065) .......................................................... 186
Electrical Schematic - IWP Super Series AC Models
(from SN IWP07-7066 to IWP07-57594) ................................................... 187
Electrical Schematic - IWP Super Series AC Models
(from SN IWP07-57595)............................................................................. 190
Electrical Schematic - IWP Super Series AC TUV Models
(With Base Mounted Junction Box)............................................................ 191
Electrical Schematic - IWP Super Series AC TUV Models
(Without Base Mounted Junction Box)....................................................... 194
Electrical Schematic - IWP Super Series AC TUV Models with Outreach ........ 195
Hydraulic Schematics - All Models ................................................................ 197
Hydraulic Schematic - AWP Super Series Models ............................................ 198
Hydraulic/Pneumatic Schematic - AWP Super Series Models .......................... 199
Hydraulic Schematic - IWP Super Series Models without Power Assist ........... 202
Hydraulic Schematic - IWP Super Series Models with Power Assist ................ 203
Hydraulic Schematic - IWP Super Series
Models with Power Assist and Brake......................................................... 205

September 2016 Service Manual
Specifications
Part No. 38139 AWP Super Series • IWP Super Series 17
Section 2 Speci fi c ati ons
AWP-15S, 20S and 25S Specifications
Model
AWP-
15S
AWP-
20S
AWP-
25S
Standard Base
Height, working maximum
21 ft 4 in
6.5 m
26 ft 1 in
8.0 m
30 ft 9 in
9.4 m
Height, platform maximum
15 ft
4 in
4.7 m
20 ft 1 in
6.1 m
24 ft 9 in
7.6 m
Lift capacity
all models except Canada
350 lbs
159 kg
350 lbs
159 kg
350 lbs
159 kg
Lift capacity
models sold in Canada only
300 lbs
136 kg
300 lbs
136 kg
300 lbs
136 kg
Machine weight
(DC / AC and Air
models)
718 / 628 lbs
326 / 285 kg
764 / 674 lbs
347 / 306 kg
817 / 727 lbs
371 / 330 kg
Height, stowed
78 in
198 cm
78 in
198 cm
78 in
198 cm
Width
29 in
73.6 cm
29 in
73.6 cm
29 in
73.6 cm
Length
46 in
117 cm
46 in
117 cm
46 in
117 cm
Outrigger
footprint
(l x w) Domestic
60 ¾ x 52 ¾ in
154 x 134 cm
60 ¾ x 52 ¾ in
154 x 134 cm
60 ¾ x 52 ¾ in
154 x 134 cm
Outrigger footprint
(l x w) CSA
60 ¾ x 52 ¾ in
154 x 134 cm
69 ¼ x 61 ¼ in
175.6 x 155.3 cm
83 ½ x 75 ½ in
212 x 191 cm
Outrigger footprint
(l
x w) CE Indoor
60 ¾ x 52 ¾ in
154 x 134 cm
60 ¾ x 52 ¾ in
154 x 134 cm
69 ¼ x 61 ¼ in
175.6 x 155.3 cm
Outrigger footprint*
(l x w) CE Outdoor
69 ¼ x 61 ¼ in
175.6 x 155.3 cm
83 ¼ x 75 ¼ in
211.5 x 191.2 cm
89 x 81 in
225.9 x 205.6 cm
Corner access/wall
access*
Domestic
15 ¾ / 8 in
39.7 / 20.3 cm
14 ½ / 5 ½ in
36.9 / 7.4 cm
14 / 3 in
35.1 / 7.4 cm
Corner access/wall access*
CSA
15 ¾ / 8 in
39.7 / 20.3 cm
20 ¼ / 9 ¾ in
51.2 / 24.5 cm
28 ¾ / 14 ¼ in
73 / 36.2 cm
Corner access/wall access*
CE Indoor
15 ¾ /
8 in
39.7 / 20.3 cm
14 ¼ / 5 ½ in
36.9 / 7.4 cm
19 ¼ / 7 ¼ in
48.6 / 18.2 cm
Corner access/wall access*
CE Outdoor
21 ½ / 12 ¼ in
54.6 / 30.8 cm
30 / 16 ¾ in
76 / 42.4 cm
32 ½ / 17 in
82.5 / 43.4 cm
*Corner of platform top rail to corner of wall with ability to rotate the leveling jack.
Platform Dimensions
- all models
Standard platform
(L x W x H) gated or sliding mid
-rail
27 x 26 x 44 ¾ in
69 x 66 x 114 cm
Gated narrow platform
(L x W x H)
26 x 20 x 44 ¾ in
66 x 51 x 114 cm
Gated ultra
-narrow platform
(L x W x H)
22 x 18 x 44 ¾ in
56 x 46 x 114 cm
Standard fiber platform
(L x W x H)
29 x 26 ½ x 43 ½ in
74 x 67 x 110 cm

Service Manual September 2016
Specifications
18 AWP Super Series • IWP Super Series Part No. 38139
AWP 30S, 3 6S a nd 4 0S Sp ecif icat ions
Model
AWP-
30S
AWP-
36S
AWP-
40S
Standard Base
Height, working maximum
35 ft 6 in
10.8 m
42 ft 5 in
12.9 m
46 ft 3 in
14.1 m
Height, platform maximum
29 ft 6 in
9.0 m
36 ft 6 in
6.1 m
40 ft 3 in
12.3 m
Lift capacity
all models except Canada
350 lbs
159 kg
350 lbs
159 kg
300 lbs
136 kg
Lift capacity
models sold in Canada only
300 lbs
136 kg
300 lbs
136 kg
300 lbs
136 kg
Machine weight
(DC / AC and Air models)
831 / 741 lbs
377 / 336 kg
1107 / 1017 lbs
502 / 461 kg
1130 / 1040 lbs
513 / 472 kg
Height, stowed
78 in
198 cm
109 ½ in
278 cm
109 ½ in
278 cm
Width
29 in
73.6 cm
29 in
73.6
cm
29 in
73.6 cm
Length
46 in
117 cm
55 in
140 cm
55 in
140 cm
Outrigger footprint
(l x w) Domestic
69 ¼ x 61 ¼ in
175.6 x 155.3 cm
83 ¼ x 75 ¼ in
211.5 x 191.2 cm
89 x 81 in
225.9 x 205.6 cm
Outrigger footprint
(l x w) CSA
97 ½ x 89 ½ in
247.5 x 227.2
cm
117 ¼ x 109 ¼ in
297.8 x 278 cm
117 ¼ x 109 ¼ in
297.8 x 278 cm
Outrigger footprint
(l x w) CE Indoor
75 ½ x 67 ½ in
192 x 171.4 cm
83 ¼ x 75 ¼ in
211.5 x 191.2 cm
89 x 81 in
225.9 x 205.6 cm
Outrigger footprint*
(l x w) CE Outdoor
117 ¼ x 109 ½ in
29
7.8 x 278 cm
117 ¼ x 109 ¼ in
297.8 x 278 cm
117 ¼ x 109 ¼ in
297.8 x 278 cm
Corner access/wall access*
Domestic
18 ½ / 4 ¾ in
46.6 / 11.9 cm
28 ½ / 14 ½ in
72.7 / 36.2 cm
31 ¼ / 14 ½ in
79.4 / 37.1 cm
Corner access/wall access*
CSA
37 / 18 ¾ in
94.1 /
47.8 cm
52 / 31 ¼ in
132.5 / 79.3 cm
50 ¾ / 28 ¾ in
128.8 / 73 cm
Corner access/wall access*
CE Indoor
22 ¼ / 8 in
56.6 / 20.3 cm
28 ½ / 14 ½ in
72.7 / 36.2 cm
31 ¼ / 14 ½ in
79.4 / 37.1 cm
Corner access/wall access*
CE Outdoor
50 ¾ / 28 ¾ in
128.8 / 73
cm
52 / 31 ¼ in
132.5 / 79.3 cm
50 ¾ / 28 ¾ in
128.8 / 73 cm
*Corner of platform top rail to corner of wall with ability to rotate the leveling jack.
Platform Dimensions
- all models
Narrow fiber platform
(L x W x H)
26 x 22 x 43 ½ in
66 x 56 x 110 cm
Extra large platform
(L x W x H)
30 x 28 x 44 ¾ in
76 x 71 x 114 cm
Front and side entry platform
(L x W x H)
30 x 28 x 44 ¾ in
76 x 71 x 114 cm

September 2016 Service Manual
Specifications
Part No. 38139 AWP Super Series • IWP Super Series 19
AWP N arrow B ase S peci fic ations
Model
AWP-
15S
AWP-
20S
AWP-
25S
AWP-
30S
Narrow Base
Machine weight
(DC / AC and Air models)
711 / 621 lbs
322 / 282 kg
745 / 655 lbs
338 / 297 kg
780 / 690 lbs
353 / 313 kg
814 / 724 lbs
369 / 328 kg
Height, stowed
78 in
198 cm
78 in
198 cm
78 in
198 cm
78 in
198 cm
Width
22 in
55.8 cm
22 in
55.8 cm
22 in
55.8 cm
22 in
55.8 cm
Length
49 ½ in
125.7 cm
49 ½ in
125.7 cm
49 ½ in
125.7 cm
49 ½ in
125.7 cm
Outrigger footprint
(l x w) Domestic
64 x 48 ¼ in
162.5 x 122.5 cm
64 x 48 ¼ in
162.5 x 122.5 cm
64 x 48 ¼ in
162.5 x 122.5 cm
71 ½ x 58 in
181.6 x 147.3 cm
Outrigger
footprint
(l x w) CSA
71 ½ x 58 in
181.6 x 147.3 cm
74 ½ x 65 ½ in
189.2 x 166.3 cm
83 ¼ x 74 in
211.4 x 187.9 cm
95 ¼ x 89 ¾ in
241.9 x 227.9 cm
Outrigger footprint
(l x w) CE Indoor
64 x 48 ¼ in
162.5 x 122.5 cm
71 ¼ x 58 in
181.6 x 147.3 cm
71 ¼ x 58
in
181.6 x 147.3 cm
74 ½ x 65 ½ in
189.2 x 166.3 cm
Outrigger footprint*
(l x w) CE Outdoor
83 ¼ x 74 in
211.4 x 187.9 cm
83 ¼ x 74 in
211.4 x 187.9 cm
95 ¼ x 89 ¾ in
241.9 x 227.9 cm
112 x 112 in
284.4 x 284.4 cm
Corner access/wall access*
Domestic
16 / 11 in
40.6 / 27.9 cm
14 ¼ / 8 ½ in
36.2 / 7.4 cm
13 / 6 in
33 / 15.2 cm
18 ½ / 7 ¼ in
47 / 18.4 cm
Corner access/wall access*
CSA
22 ½ / 14 ¾ in
57.1 / 37.5 cm
24 ½ / 14 in
62.2 / 35.5 cm
28 ¾ / 15 in
73 / 38.1 cm
37 ½ / 18 ½ in
95.2 / 47 cm
Corner acce
ss/wall access*
CE Indoor
16 / 11 in
40.6 / 27.9 cm
21 / 12 ¼ in
53.3 / 31.1 cm
19 ½ / 9 ¾ in
49.5 / 24.7 cm
22 / 9 in
55.8 / 22.8 cm
Corner access/wall access*
CE Outdoor
31 ½ / 20 ¼ in
80 / 50.8 cm
30 / 17 ½ in
76.2 / 44.4 cm
38 ¾ / 21 in
98.4 / 53.3 cm
51 / 26 ½ in
129.5 / 67.3 cm
*Corner of platform top rail to corner of wall with ability to rotate the leveling jack.
Platform Dimensions
Gated ultra
-narrow platform
(L x W x H)
22 x 18 x 44 ¾ in
56 x 46 x 114 cm
Narrow fiber platform
(L x W x H)
26 x 22 x 43 ½ in
66 x 56 x 110 cm
Gated narrow platform
(L x W x H)
26 x 20 x 44 ¾ in
66 x 51 x 14 cm

Service Manual September 2016
Specifications
20 AWP Super Series • IWP Super Series Part No. 38139
AWP R oug h Ter rai n Bas e Sp ecific ati ons
Model
AWP-
15S
AWP-
20S
AWP-
25S
AWP-
30S
Rough Terrain Base
Machine weight
(DC / AC and Air models)
715 /
625 lbs
324.5 / 283.7 kg
750 / 660 lbs
339.7 / 298.9 kg
784 / 694 lbs
355.3 / 314.6 kg
819 / 729 lbs
371 / 330.2 kg
Height, stowed
79 in
201 cm
79 in
201 cm
79 in
201 cm
79 in
201 cm
Width
29 ½ in
75 cm
29 ½ in
75 cm
29 ½ in
75 cm
29 ½ in
75 cm
Length
58 in
147 cm
58 in
147 cm
58 in
147 cm
58 in
147 cm
Outrigger footprint
(l x w) Domestic
64 x 48 ¼ in
162.5 x 122.5 cm
64 x 48 ¼ in
162.5 x 122.5 cm
64 x 48 ¼ in
162.5 x 122.5 cm
71 ½ x 58 in
181.6 x 147.3 cm
Outrigger footprint
(l x w) CSA
71 ½ x 58 in
181.6 x 147.3 cm
74 ½ x 65 ½ in
189.2 x 166.3 cm
83 ¼ x 74 in
211.4 x 187.9 cm
95 ¼ x 89 ¾ in
241.9 x 227.9 cm
Outrigger footprint
(l x w) CE Indoor
64 x 48 ¼ in
162.5 x 122.5 cm
71 ¼ x 58 in
181.6 x 147.3 cm
71 ¼ x 58 in
181.6 x 147.3 cm
74 ½ x 65 ½ in
189.2 x 166.3 cm
Outrigger footprint*
(l x w) CE Outdoor
83 ¼ x 74 in
211.4 x 187.9 cm
83 ¼ x 74 in
211.4 x 187.9 cm
95 ¼ x 89 ¾ in
241.9 x 227.9 cm
112 x 112 in
284.4 x 284.4 cm
Corner access/wall access*
Domestic
16 / 11 in
40.6 / 27.9 cm
14 ¼ / 8 ½ in
36.2 / 7.4 cm
13 / 6 in
33 / 15.2 cm
18 ½ / 7 ¼ in
47 / 18.4 cm
Corner access/wall access*
CSA
22 ½ / 14 ¾ in
57.1 / 37.5 cm
24 ½ / 14 in
62.2 / 35.5 cm
28 ¾ / 15 in
73 / 38.1 cm
37 ½ / 18 ½ in
95.2 / 47 cm
Corner access/wall access*
CE Indoor
16 / 11
in
40.6 / 27.9 cm
21 / 12 ¼ in
53.3 / 31.1 cm
19 ½ / 9 ¾ in
49.5 / 24.7 cm
22 / 9 in
55.8 / 22.8 cm
Corner access/wall access*
CE Outdoor
31 ½ / 20 ¼ in
80 / 50.8 cm
30 / 17 ½ in
76.2 / 44.4 cm
38 ¾ / 21 in
98.4 / 53.3 cm
51 / 26 ½ in
129.5 / 67.3 cm
*Corner of platform top rail to corner of wall with ability to rotate the leveling jack.
Platform Dimensions
Standard platform
(L x W x H) gated or sliding mid
-rail
27 x 26 x 44 ¾ in
69 x 66 x 114 cm
Narrow fiber platform
(L x W x H)
26 x 22 x 43 ½
in
66 x 56 x 110 cm
Gated ultra
-narrow platform
(L x W x H)
22 x 18 x 44 ¾ in
56 x 46 x 114 cm
Front and side entry platform
(L x W x H)
30 x 28 x 44 ¾ in
76 x 71 x 114 cm
Gated narrow platform
(L x W x H)
26 x 20 x 44 ¾ in
66 x 51 x 14 cm
Extra large
platform
(L x W x H)
30 x 28 x 44 ¾ in
76 x 71 x 114 cm
Standard fiber platform
(L x W x H)
29 x 26 ½ x 43 ½ in
74 x 67 x 110 cm