GeoVision GV-Hybrid LPR Camera 20R User manual

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
User's Manual
GV-Hybrid LPR Camera 20R/
10R / GV-IP LPR Camera 5R /
GV-LPC1100
LPRCAMV101-B

© 2015GeoVision, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in part, without the
written consent of GeoVision.
Every effort has been made to ensure that the information in this manual is accurate.
GeoVision, Inc. makes no expressed or implied warranty of any kind and assumes no
responsibility for errors or omissions. No liability is assumed for incidental or consequential
damages arising from the use of the information or products contained herein. Features and
specifications are subject to change without notice.
GeoVision, Inc.
9F, No. 246, Sec. 1, Neihu Rd.,
Neihu District, Taipei, Taiwan
Tel: [phone]
Fax: [phone]
http://www.geovision.com.tw
Trademarks used in this manual: GeoVision, the GeoVision logo and GV series products are
trademarks of GeoVision, Inc. Windows and Windows XP are registered trademarks of
Microsoft Corporation.
January 2015

Preface
Welcome to the GV-Hybrid LPR Camera 20R / 10R / GV-IP LPR Camera 5R / GV-LPC
1100 User’s Manual.
The GV-IP LPR Camera has a series of models designed to meet different needs. This
manual is designed for the following models and firmware versions:
Models Firmware Version
GV-Hybrid LPR Camera 20R 1.02
GV-Hybrid LPR Camera 10R 1.02
GV-IP LPR Camera 5R 1.01
GV-LPC1100 1.01
Note: GV-LPC1100 is also referred to GV-IP LPR Camera 10R.
i

Contents
Naming Definition..................................................................................................... v
Options...................................................................................................................... v
Note for Connecting to GV-System / GV-VMS........................................................vi
Note for Installing Camera Outdoor .......................................................................vii
Note for Adjusting GV-Hybrid LPR Camera 20R ..................................................viii
Chapter 1 Introduction........................................................................................... 1
1.1 GV-Hybrid LPR Camera 20R / 10R...........................................................................1
1.1.1 Features..................................................................................................... 2
1.1.2 System Requirements ................................................................................ 3
1.1.3 Packing List................................................................................................ 4
1.1.4 Camera Overview....................................................................................... 5
1.1.5 Device Installation ...................................................................................... 6
1.1.6 Connecting the Camera.............................................................................10
1.2 GV-IP LPR Camera 5R...........................................................................................14
1.2.1 Features....................................................................................................15
1.2.2 System Requirements ...............................................................................16
1.2.3 Packing List...............................................................................................17
1.2.3 Packing List...............................................................................................17
1.2.4 Device Installation .....................................................................................18
1.2.5 Connecting the Camera.............................................................................19
1.2.6 Adjusting the Angles..................................................................................20
1.2.7 Replacing the Silica Gel Bag .....................................................................23
1.2.8 Installing the Sun-Shield Cover .................................................................24
1.3 GV-LPC1100...........................................................................................................25
1.3.1 Features....................................................................................................26
1.3.2 System Requirements ...............................................................................27
1.3.2 System Requirements ...............................................................................27
1.3.3 Packing List...............................................................................................28
1.3.3 Packing List...............................................................................................28
1.3.4 Device Installation .....................................................................................29
1.3.5 Connecting the Camera.............................................................................31
1.3.6 Replacing the Silica Gel Bag .....................................................................34
Chapter 2 Getting Started.................................................................................... 36
2.1 Looking Up the IP Address .....................................................................................36
2.2 Accessing Your Surveillance Images ......................................................................39
ii

2.3 Configuring the Basics............................................................................................40
Chapter 3 Guest Mode and Live View Panel...................................................... 41
3.1 The Live View Window ...........................................................................................42
3.2 The Control Panel of the Live View Window ...........................................................44
3.3 Snapshot of a Live Video........................................................................................47
3.4 Video Recording .....................................................................................................47
3.5 Picture-in-Picture and Picture-and-Picture View .....................................................48
3.6 Alarm Notification ...................................................................................................50
3.7 Video and Audio Configuration ...............................................................................52
3.8 Remote Configuration............................................................................................. 53
3.9 Camera Name Display............................................................................................53
3.10 Image Enhancement.............................................................................................53
Chapter 4 Administrator Mode............................................................................ 54
4.1 Video & Motion .......................................................................................................56
4.1.1 Video Settings ...........................................................................................57
4.1.2 Motion Detection .......................................................................................61
4.1.3 Privacy Mask.............................................................................................62
4.1.4 Text Overlay ..............................................................................................63
4.1.5 Tampering Alarm .......................................................................................64
4.2 Events & Alerts .......................................................................................................65
4.2.1 E-mail........................................................................................................66
4.2.2 FTP ...........................................................................................................68
4.2.3 Center V2..................................................................................................70
4.2.4 Vital Sign Monitor ......................................................................................72
4.2.5 GV-Video Gateway / GV-Recording Server..............................................74
4.2.6 RTSP.......................................................................................................76
4.3 Monitoring...............................................................................................................77
4.3.1 GV-Hybrid LPR Camera 20R / 10R ...........................................................77
4.3.2 Monitoring Settings..................................................................................78
4.4 Network ..................................................................................................................78
4.4.1 LAN Configuration .....................................................................................79
4.4.2 Advanced TCP/IP......................................................................................81
4.4.3 IP Filtering .................................................................................................85
4.4.4 SNMP Settings..........................................................................................86
4.5 Management ..........................................................................................................88
4.5.1 Date and Time Settings .............................................................................88
4.5.2 User Account.............................................................................................90
4.5.3 Log Information .........................................................................................91
iii

4.5.4 Tools..........................................................................................................92
4.5.5 Language ..................................................................................................94
Chapter 5 Advanced Applications ...................................................................... 95
5.1 Upgrading System Firmware ..................................................................................95
5.1.1 Using the Web Interface............................................................................96
5.1.2 Using the GV-IP Device Utility ...................................................................97
5.2 Backing Up and Restoring Settings ......................................................................100
5.3 Restoring to Factory Default Settings ...................................................................102
5.3.1 Using the Web Interface ..........................................................................102
5.3.2 Directly on the Camera............................................................................102
5.4 Verifying Watermark .............................................................................................103
5.4.1 Accessing AVI Files .................................................................................103
5.4.2 Running Watermark Proof .......................................................................103
5.4.3 The Watermark Proof Window.................................................................104
Chapter 6 DVR Configurations ......................................................................... 105
6.1 Setting Up IP Cameras on GV-System .................................................................107
6.1.1 Customizing Camera Settings .................................................................110
6.2 Setting Up IP Cameras on GV-VMS ..................................................................... 112
6.3 Remote Monitoring with Multi View ....................................................................... 115
6.4 Remote Monitoring with E-Map............................................................................. 117
Chapter 7 CMS Configurations ..........................................................................119
7.1 Center V2 ............................................................................................................. 119
7.2 Vital Sign Monitor..................................................................................................122
7.3 Dispatch Server ....................................................................................................123
Chapter 8 Smart Device Connection ................................................................ 125
Specifications ....................................................................................................... 126
GV-Hybrid LPR Camera 20R / 10R ...............................................................................126
GV-IP LPR Camera 5R .................................................................................................130
GV-LPC1100 .................................................................................................................133
Appendix ............................................................................................................... 137
A. The CGI Command...................................................................................................137
B. RTSP Protocol Support.............................................................................................138
C. Settings for Internet Explorer 8 or later .....................................................................139
iv

Naming Definition
GV-System
GeoVision Analog and Digital Video Recording Software. The
GV-System also refers to Multicam System, GV-NVR System,
GV-DVR System and GV-Hybrid DVR System at the same
time.
GV-VMS GeoVision Video Management System for IP cameras.
Options
Optional devices can expand your camera’s capabilities and versatility. Contact your dealer
for more information.
Device Description
GV-PA191 PoE
Adapter
The GV-PA191 PoE adapter is designed to provide power and network
connection to the cameras over a single Ethernet cable. The GV-PA191
PoE adapter is only available for GV-IP LPR Camera 5R.
GV-PA481 PoE
Adapter
The GV-PA481 PoE adapter is designed to provide power to the IP
device through a single Ethernet cable. The GV-PA481 adapter is only
available for the GV-Hybrid LPR Camera 10R / 20R.
GV-PA482 PoE
Adapter
The GV-PA 482 PoE adapter is designed to provide power and network
connection to the cameras over a single Ethernet cable. The GV-PA482
PoE adapter is only available for GV-LPC1100.
GV-PoE Switch The GV-POE Switch can be used for data transmission only. It does not
provide power to GV-IP LPR cameras and GV-Hybrid LPR cameras.
v

Note for Connecting to GV-System / GV-VMS
The GV-Hybrid LPR Camera 20R / 10R / GV-IP LPR Camera 5R / GV-LPC1100 is designed to
work with and record on GV-System / GV-VMS, a video management system.
Once the camera is connected to the GV-System / GV-VMS, the resolution set on the
GV-System / GV-VMS will override the resolution set on the camera’s Web interface. You can
only change the resolution settings through the Web interface when the connection to the
GV-System / GV-VMS is interrupted.
vi

Note for Installing Camera Outdoor
When installing the GV-Hybrid LPR Camera 20R / 10R / GV-IP LPR Camera 5R /
GV-LPC1100 outdoor, mind the following:
1. Set the camera above the junction box to prevent water from entering the camera along
the cables.
2. Waterproof the PoE, power and TV-out cables with waterproof silicon rubber or the like.
3. To prevent the lens from fogging up, replace the silica gel bag every time you open the
camera, and conceal the gel bag in camera within 2 minutes of exposing to open air. The
silica gel bag loses it effectiveness when the dry camera is opened.
4. For each newly replaced silica gel bag, allow it to absorb moisture for at least 5 hours
before operating the camera.
5. The camera casing can be hot due to its IR LED. Make sure you unplug the power cable
and allow the camera casing to cool down before handling the camera.
vii

viii
Note for Adjusting GV-Hybrid LPR Camera 20R
During the operation of the GV-Hybrid LPR Camera 20R, the external IR Illuminator is at the
high temperature of up to 50°C (122°F). When adjusting the camera angle or reinstalling the
camera, avoid touching the surface of the external IR Illuminator.

Introduction
1
1
Chapter 1 Introduction
1.1 GV-Hybrid LPR Camera 20R / 10R
The GV-Hybrid LPR Camera 20R, with an external IR Illuminator, is a 1.3 MP B/W network
camera designed solely for recognition of reflective license plates on vehicles traveling at 120
km/hr (75 mph) or less. Equipped with an external IR Illuminator which allows the maximum
IR distance of 22 m (72.2 ft.), the camera is able to produce clear license plate capture for one
lane under low-light conditions. It is also able to work in environments with extreme
temperatures from as low as -40°C (-40°F) up to 50°C (122°F).
The GV-Hybrid LPR Camera 10R is a 1.3 MP B/W network camera designed solely for
recognition of reflective license plates on vehicles traveling at 120 km/hr (75 mph) or less.
With its high-power LEDs and intelligent IR, the camera is able to automatically adjust its
shutter speed to the scene and produce clear license plate capture under low-light conditions.
Under certain conditions, the GV-Hybrid LPR Camera 10R can capture up to two lanes in a
single shot. It is also able to work in environments with extreme temperatures from as low as
-40°C (-40°F) up to 50°C (122°F).
The GV-Hybrid LPR Camera 20R / 10R can be easily configured through its Web interface
and you can record and play back recordings using the free GV-NVR software included in the
standard package.
GV-Hybrid LPR Camera 10R
GV-Hybrid LPR Camera 20R

2
1.1.1 Features
•1.3 megapixel B/W progressive scan CMOS
•Dual streams from MJPEG or H.264
•Up to 30 fps at 1280 x 1024
•Recognition for reflective License Plate only
•Maximum speed 120 km/h (75 mph)
•Ingress protection (IP67)
•Vandal resistance (IK10)
•Maximum IR distance 22 m (72.2 ft.) (for GV-Hybrid LPR Camera 20R only)
•Maximum IR distance 12 m (39.4 ft.) (for GV-Hybrid LPR Camera 10R only)
•Built-in heater and fan
•Support for TV-out
•Two-way audio
•Defog
•Motion detection
•Tampering alarm
•Privacy mask
•Text overlay
•IP address filtering
•Power supplied through PoE (PoE+, IEEE 802.3 at)
•Support for iPhone, iPad, Android and 3GPP
•ONVIF (Profile S) conformant
•31 languages on Web interface

Introduction
3
1
1.1.2 System Requirements
To access the camera functions and settings through Web browser, ensure your PC is in good
network connection and use one of the following Web browsers:
•Microsoft Internet Explorer 7.x or later
•Google Chrome
•Mozilla Firefox
•Safari
Note:
1. For users of Internet Explorer 8 or later, additional settings are required. For details,
see Appendix C.
2. With non-IE browsers,
A. Motion Detection, Text Overlay and two-way audio are not supported.
B. The Play function is only available on the live view window (Figure 3-2).
C. RTSP streaming must be kept as enabled. For more details, see 4.3.8 RTSP /
3GPP.
Compatible Software Version
Model Firmware Version GV-System Version GV-VMS Version
GV-Hybrid LPR Camera
20R
V1.02 V8.5.7.0 14.10
V1.00 V8.5.5.0 N/A
V1.01 N/A
GV-Hybrid LPR Camera
10R
V1.02
V8.5.7.0
14.10

4
1.1.3 Packing List
•GV-Hybrid LPR Camera 20R / 10R
•Iron Screw Anchor x 4 (for GV-Hybrid LPR Camera 20R only)
•Plastic Screw Anchor x 4 (for GV-Hybrid LPR Camera 10R only)
•Expansion Screw x 4 (for GV-Hybrid LPR Camera 20R only)
•Screw x 4 (for GV-Hybrid LPR Camera 10R only)
•Washer x 4
•Big Torx Wrench
•Small Torx Wrench
•Sun-Shield Cover
•Silica Gel Bag x 2 (1 already installed)
•Sticker x 2
•GV-PA481 PoE Adapter
•GV-PA481 Power Cord
•GV-IP LPR Camera Software CD
•GV-NVR Software DVD
•GV-ASManager Software DVD

Introduction
5
1
1.1.4 Camera Overview
To access the functional panel of the GV-Hybrid LPR Camera 20R / 10R, follow the section
below to remove its camera cover first.
Figure 1-1
No. Name Description
1 IR power plug Supplies power to the built-in IR LEDs.
2 Status LED Turns on when the unit is ready for use.
3 Silica gel bag Keeps the camera housing dry.
4 Zoom Screw Adjusts the zoom of the camera.
5 Focus Screw Adjusts the focus of the camera.
1 2
45
3

6
1.1.5 Device Installation
1.1.5.1 Installation Guidelines
To produce quality image and to avoid software recognition errors, make sure you adhere to
the guidelines when installing your GV-Hybrid LPR Camera 20R / 10R. See GV-LPR Camera
Installation Guide.
1.1.5.2 Installing the Camera
After you have read through the installation guides and chosen an installation site, follow the
steps below to install the GV-Hybrid LPR Camera 20R / 10R. Here we use the GV-Hybrid LPR
Camera 10R as the example.
1. Mark the installation site and drill four holes for screw anchors.
2. Insert the supplied screw anchors.
3. Secure the camera to the wall using the supplied washers and screws.
Figure 1-2
4. Connect the camera to the network and supply power via the PoE cable. See 1.6
Connecting the Camera.
5. Access the live view. See 2.1 Accessing the Live View.

Introduction
7
1
6. Based on the live view, adjust the angle of the camera. Loosen the indicated screw with
the supplied big torx wrench and adjust the joint.
Figure 1-3
Tilt Adjustment
Figure 1-4
Pan Adjustment
Figure 1-5

8
7. Based on the live view, adjust the focus and zoom of the camera.
A. Unscrew the cover with the supplied small torx wrench.
Figure 1-6
B. Hold the connectors and unplug them.
Figure 1-7
Important:
1. Unscrew and remove the cover carefully. Pulling the cover off may cause damages to
the inner wiring of the camera.
2. To prevent the live view from being darkened when the cover is removed, see LPR
Setting in 4.1.1 Video Setting.
C. Adjust the focus and zoom.
Figure 1-8

Introduction
9
1
8. Replace the silica gel bag. Paste the sticker to the front side of the silica gel bag. Press
the sticker several times to make sure it adheres properly. Paste the silica gel bag to the
indicated place.
Figure 1-9
Important:
1. Be sure that the silica gel bag is concealed in the camera housing within 2 minutes of
exposing to open air.
2. To prevent the lens from fogging up, you must replace the silica gel bag every time you
open the camera. The gel bag loses its effectiveness when the dry camera is opened.
3. For each newly replaced silica gel bag, allow it to absorb moisture for at least 5 hours
before operating the camera.
9. Refer to step 7 to plug the connectors and secure the camera cover.

10
1.1.6 Connecting the Camera
Follow the steps below to connect your GV-Hybrid LPR Camera 20R / 10R.
1.1.6.1 GV-Hybrid LPR Camera 20R
1. Optionally connect a speaker to the green RCA wire and an external microphone to the
pink RCA wire.
2. Optionally connect a monitor to the black BNC wire. Enable the TV-Out function by
selecting the correct signal format at the TV Out field on the Web interface. See 4.1.1
Video Settings.
3. Connect the camera’s cable to the GV-PA481 PoE adapter as illustrated below. The
power and network will be supplied simultaneously.
4. Connect the external IR Illuminator’s cable to the power source.
Figure1-10
5. When the status LED of the camera is on, you are ready to access the live view, adjust the
image clarity and configure the basics. See Getting Started, Chapter 2.
CAUTION: The surface of the external IR Illuminator is at the high temperature of up to
50°C (122°F) during operation of the GV-Hybrid LPR Camera 20R.